Hi Fred - OK, here it comes...

Primary
-----------
1 CPU - Intel Pentium 4, 2.6 GH, 800FSB
1 core w/ hyper-threading
8K primary memory cache, 512K secondary memory cache
2.5G total memory, DDR SDRAM at 400MH
Bus Clock - 800MH
WinXP Pro, SP3

Quad-Core
-----------------
1 CPU - Intel Core2 Q6600, 2.4 GH, 1066 FSB
quad core
64K primary memory cache, supposedly 8M secondary memory cache but Belarc 
Advisor only reports 4M, will have to look into this tomorrow...
4G total memory, DDR2 SDRAM at 800MH
Bus Clock - 266MH ( x 4 cores I believe )
WinXP Pro, SP3


----- Original Message ----- 

  From: Steve Dugas 
  To: [email protected] 
  Sent: Friday, May 23, 2008 6:16 PM
  Subject: Re: [amibroker] Quad-core test results


  Hi Fred - Re 10X vs. 2.5X, I guess I was looking at it in terms of work done 
per unit of time, i.e. the quad-core will do 4 of these opts in 1/2 hour, 
whereas the primary machine would take 1.25 x 4 = 5 hours to do the same work. 
But actually it just occurred to me that I am shortchanging the primary machine 
- I guess I didn't think of it earlier because, as a practical matter, I never 
load up this machine with multiple opts anyway as I need to use it for other 
things throughout the day. But anyway, the primary box ( Pentium 4 ) has only 
one CPU but it has hyper-threading. I don't know if this is the same technology 
as dual-core but it does show up as 2 CPU's in Task Manager. So just now I 
decided to try running multiple instances on this box. The results are that 1 
instance takes 50% of both "CPU's", and running 2 instances maxes out both 
CPU's at 100% and also increases the run times for both instances from 1:15 to 
1:50. Anyway, just wanted to try it out and set the record straight. I will 
follow up with the other info a little later...

  Steve
    ----- Original Message ----- 
    From: Steve Dugas 
    To: [email protected] 
    Sent: Friday, May 23, 2008 2:21 PM
    Subject: Re: [amibroker] Quad-core test results


    Hi Fred - I will pull this info together later today and post it for you...

    Steve
      ----- Original Message ----- 
      From: Fred Tonetti 
      To: [email protected] 
      Sent: Friday, May 23, 2008 12:25 AM
      Subject: RE: [amibroker] Quad-core test results


      Steve,

       

      Can you provide some information about the differences between the 
machine you refer to as you faster primary machine and the new quad core .

       

      -          Number of CPU's

      -          Number of Cores

      -          On Chip Cache Memory Size

      -          Total Memory

      -          OS System & Version & SP

       

      It would appear that without splitting up the task that you are basically 
getting a 2.5 times improvement between your faster primary machine and the 
quad core i.e. 75 minutes .vs. 30 minutes.

       

      This could be accounted for by several things in the configuration.

       

      I find it more interesting however that you can drive the same task 
through all four cores on your quad at the same speed as running a single 
optimization.

       

      I would think the implication is that there would be benefit to being 
able to have AB do this automatically, at least on newer hardware and of course 
as time goes along more and more hardware out there in the hands of users will 
be of this caliber.

       

      Mark K,

       

      The problem with trying to get IO to do something like this is that my 
understanding of OLE / Automation is that it is only able to see what is the 
first instance of AB running.  The implication is that while one could be 
running IO in each of the four cores they would by default all be talking to 
the same instance of Broker.exe.

       


--------------------------------------------------------------------------

      From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of 
Steve Dugas
      Sent: Thursday, May 22, 2008 8:50 PM
      To: Yahoo - AmiBroker
      Subject: [amibroker] Quad-core test results

       

      Hi All,

       

      I finished setting up the new quad-core machine and ran my first tests 
today, so am posting the promised test results. All I can say is Wow!  Really 
nice improvements, even better than I expected to see in my highest hopes. I am 
happy as a pig in sh*t !!     8 - )

       

      For background, the test was an optimization run on a single ticker, 
which is how I will be running all my other tests ( ticker was QID, 468 EOD 
data bars ). All tests used the same code with different param settings, all 
tests had about 46,000 opt steps.

       

      To put things in perspective and show why I am so happy, the original 
code was about 2,400 lines. The first time I ran it, on my old backup computer 
which I was using as a dedicated optimization machine, it took 7 1/2 hours to 
run. So then I copied the code and created a shorter version, removing 
everything which wasn't absolutley necessary for the optimizer, and that 
reduced the run time to 2 1/2 hours. Then I ran this short version on my faster 
primary machine and that took 1 1/4 hours, which is about what I was expecting 
to see on the new machine.

       

      So today I started by running just ran one instance on the quad-core - 
that took only 30 mins and Task Manager showed it was using just 25% of the 
total processing power!  Well to make a long story short, I kept adding one 
instance at a time, all instances ran in 30 mins and each used up an additional 
25% of the CPU power. In the end, I was easily running 4 simultaneous 
instances. This pretty much kept the CPU tached at 100% but all instances ran 
fine, all finished in 30 mins and I didn't experience any problems at all. I 
was even saving the first ones to spreadsheets while the final ones were still 
finishing, wow everything just worked flawlessly!  So, the quad-core can run 4 
seperate opts simultaneously in 30 mins, which averages out to 7 1/2 minutes 
per opt, which = 

       

      10X improvement over running the short code on the fast machine...

      20X improvement over running the short code on the old dedicated 
optimization machine...

      60X improvement over running the original code on the old optimization 
machine...  Awesome !!!

       

      To those who were wondering what is the best machine to get for running 
AB, it looks to me like quad is the way to go.  ( My machine has an Intel 
processor, which TJ mentioned should probably work better than AMD for this 
stuff )....

       

      Steve


--------------------------------------------------------------------------
      I am using the free version of SPAMfighter for private users.
      It has removed 459 spam emails to date.
      Paying users do not have this message in their emails.
      Try SPAMfighter for free now!

   

Reply via email to