Hi Bill, Thanks for the offer....have some other options to ck out first but your xfmr would do the job....can you give me the dimensions. Where did it come from/mfg? Is it potted...how is....well I suppose the picture would be FB.....Thank you, Bob
At 04:45 PM 8/9/2002 -0700, you wrote:
Hi, Bob I have a 6000 volt ct transformer, with a 120v tapped hi/lo primary. Should be good for at least an amp. Weighs 53 pounds. I can send a pix if you are interested. Not looking for a trade, though, am trying to lighten the load around here. I'd take $75 plus shipping. 73 de Bill, AB6MT [EMAIL PROTECTED] ----- Original Message ----- From: "Bob Login" <[EMAIL PROTECTED]> To: <AMRadio@mailman.qth.net> Sent: Friday, August 09, 2002 2:40 PM Subject: [AMRadio] Trade nos Stancor A-3894 poly-pedance 125 watt modulation xfmr > Hi, Possibly someone out there needs this new in the box modulation xfmr? > It will match from 2000-20,000 ohms in both primary and secondary with max > audio power at > 125 watts ... 225Ma on both primary & secondary. Never used in original box. > > I built a new rig pair of 4-400a's modulated by triode connected 813's. The > plate power xfmr a very old > Thordason 6000vct shorted out. I'm looking for a replacement that will be > able to go 3000-3500 at 500Ma. > So a 1500v at 1 amp in a doubler would work as will 2500-3000v at 500Ma or > 6000vct at 500Ma.....what do you have? > Used ok.... > 73 Bob, AA8A > > _______________________________________________ > AMRadio mailing list > AMRadio@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/amradio _______________________________________________ AMRadio mailing list AMRadio@mailman.qth.net http://mailman.qth.net/mailman/listinfo/amradio