It is an Eimac HK-24. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jim Wilhite Sent: Tuesday, October 05, 2004 5:48 PM To: Discussion of AM Radio Subject: Re: [AMRadio] Tube bake in process.
Run the filaments for a minimum of half hour before applying high voltage. You don't mention what tube you are speaking about, but if it is an Eimac, go to their website and read their technical information. http://www.cpii.com/eimac/index.html The information is good no matter who made the tube(s). 73 Jim de W5JO ----- Original Message ----- From: "Tom Elmore" <[EMAIL PROTECTED]> To: <amradio@mailman.qth.net> Sent: Tuesday, October 05, 2004 6:58 PM Subject: [AMRadio] Tube bake in process. >I just acquired some NOS RF tubes and have been told I should bake >them in > before using them . Is this true should I just run filament only > no high > voltage for several hours. The tube in question is an HK-24 > triode. > > Thank You > Tom Elmore > Anchorage Alaska > > ______________________________________________________________ > AMRadio mailing list > Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:AMRadio@mailman.qth.net > > ______________________________________________________________ AMRadio mailing list Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net
