I use the alpha delta coax switches for the antenna connection between
transcievers. these have built in lightning protection if you run a good
ground to the switch and short the unused antenna connection to ground. I
do not use this on the output of the linear amplifier, rather on the input
so 2 different radios can share the amp. One radio is a TS 2000 Kenwood,
the other a Ten Tec Orion. I have never had a problem and the switch has an
off position which connects neither rig and grounds both antennas for
additional lightning protection.
----- Original Message -----
From: "Mike Duke, K5XU" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" <amradio@mailman.qth.net>
Sent: Sunday, March 26, 2006 7:18 AM
Subject: [AMRadio] Switching between multiple rigs
I want to be able to select between my current 3 rigs via a switch. Since
rice boxes are included, I want the best isolation possible for the
unselected equipment.
Recommendations, please.
Mike Duke, K5XU
American Council of Blind Radio Amateurs
______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:AMRadio@mailman.qth.net
AMfone Website: http://www.amfone.net
AM List Admin: Brian Sherrod/w5ami, Paul Courson/wa3vjb
