I am thinking, however, of using a backwards 120v/12v transformer in parallel with the 240 VAC primary of the plate supply to feed the antenna relay coil - that way it would switch when I press the front panel play lever as well. Might not be as good, my present set-up gives a slight sequential timingadvantage: antenna first, then plates on. ==============================
Regarding the antenna connection/HV timing issue. To be 100% sure that there would be no catastrophic incidents if the HV was applied before the antenna connection, I use a Johnson 250-39 TR switch. That way the antenna is always connected to the TX. K7DFW ..._._ ______________________________________________________________ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.