Ahhh, that makes sense. There will certainly be inherent phase shift difference in the circuit to begin with at both ends. I can do that ballanced low Imp. Just need to know where to drop it in the circuit.
Thanks!! Bill, KB3DKS/1 "jeremy-ca" writes: >Ive owned many phasing rigs starting with a HB W2EWL, all the Central >Electronics, and a pair of HT-37's. > >While a single tone can be used to get a good indicated null it is only at >that one frequency. It is better to use two tones. If that isnt possible >then use a tape loop or digital recorder with a fairly flat speech >recording. Something recorded off the BCB with good AVC works well. Then >adjust and make sure the high frequencies are suppressed as well as the low. > >Carl >KM1H ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.
