Thanks Mike, but that's way more work than I want to do. I haven't done any welding or brazing in a long time. I'm sure that would look great, but too much for an old coot like me. HI
73, Rick/K5IAR What material is the panel made of? If steel, I would braze up the holes and grind them smooth and use a tiny skin layer of the body filler to make them glass smooth for finishing. You could solder them up also. If aluminum, I would use those low temp aluminum brazing rods and braze the holes shut. You could also use the higher temp aluminum brazing rods with brazing flux or gas weld them with aluminum rods/flux. Finish with your favorite body filler. Duraglass is a polyester based filler that does NOT absorb moisture. That's an option too. Have fun, Mike WE0H ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.