Solid state plug ins are not recommended. The higher voltage will put a strain on the input choke.
Use 3B28 tubes instead. David Knepper, W3ST-W3CRA Publisher of the Collins Journal and Secretary to the Collins Radio Association www.collinsra.com -------Original Message------- From: Jim Wilhite Date: 11/2/2009 9:17:26 PM To: Discussion of AM Radio in the Amateur Service Subject: Re: [AMRadio] COLLINS KWS 1 power supply questions Greg if you replace tube rectifiers with SS plug in units, do remove the filament line and take the output from pin 4 in the case of 866s. Other wise you might ruin a transformer someday and you really don't want that. I don't know about the KWS 1, but if the voltage is taken from the centertap, it would not be good. Jim/W5JO ----- Original Message ----- > Hi: > I finished rebuilding the power supply on my new KWS 1. I have a > couple of questions for the group: > > Is there a substitute for the HV fuse in the 2 kvdc line? Is the > original still being manufactured? > > I'm going to use solid state plug in diodes instead of the 866A's. Do > I need to disconnect the filament supply to the 866A sockets? > > Thanks > Greg > WA7LYO > Kinston NC > ______________________________________________________________ ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Post: AMRadio@mailman.qth.net To unsubscribe, send an email to amradio-requ...@mailman.qth.net with the word unsubscribe in the message body. This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html