By the way, the Fox Delta kit has 9 pin serial connector but I just use a USB converter and it works fine. I've had excellent results with the RT Systems serial/USB converter
David -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of David Wing Sent: Tuesday, August 25, 2009 12:47 PM To: [email protected] Subject: [amsat-bb] Re: HRD+FT-847+G5500 need usb controler Raul, I'm using SatPC32 not HRD but I've been using the Fox Delta ST2 and it works very well for me. I'm also using the G-5500 and FT-847. http://www.foxdelta.com/products/st2.htm Good Luck David K6CDW -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Raul Romero Sent: Tuesday, August 25, 2009 12:40 PM To: [email protected] Subject: [amsat-bb] HRD+FT-847+G5500 need usb controler any have info for controler to yaesu rotator over usb need Economy unit Tnx Raul CA3SOC --------------------------------------------------------------------- "Are you still wasting your time with spam?... There is a solution!" Protected by GIANT Company's Spam Inspector The most powerful anti-spam software available. http://mail.spaminspector.com _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
