The message is ready to be sent with the following file or link attachments: wisp32, icom 821h, kansas city tracker_tuner setup
Note: To protect against computer viruses, e-mail programs may prevent sending or receiving certain types of file attachments. Check your e-mail security settings to determine how attachments are handled.
Subject: wisp32, icom 821h, kansas city tracker/tuner setup Hello Roy... It's been a long time since i needed help with Wisp setup. I am trying to setup wisp to work with the icom 821h. I am using the Kansas City tracker and tuner. The tracker part works ok..the tuner does not. The radio is set at 1200baud and address is 4ch. The kct/t is set for ttl output on port A. In the station setup under rotators: radio is ic821 port is A set for 1200,8,n,1 bands are set...rx 144 430...tx 144 430 I did not calibrate the rotors clicked ok exit station setup using ao-51 9k6 at 435.150 for satellite click on run this pass...screen comes up tnc blinks 3 times,it's good to go...antennas track ok. frequencies do not change on the radio. read the rr.ini file and radio is in sat mode before wisp is run. Do you have to run "calibrate rotors" in the station setup/rotators box? Do you have te edit the rr.ini file? Any suggestions or help appreciated as always Bruce R Brown ke0lx
_______________________________________________ Sent via amsat...@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
