Hi Luc and all 

I am using a Transystem 3731AA downconverter.  Also an old Kenwood TS-700A for 
the tunable IF.  I have compared Keps 13LNC-PH downconverter against the 3731.  
The 3731 is virtually immune to desense to 2M tx as well as wifi etc.  However 
the Keps (pricey) is affected by the 2M tx.  Without the noise blanker turned 
on in the TS-700 I get lots of snapping, popping from wireless phones, wifi 
etc.  The noise blanker in this old 700 is superb, better that the one in my 
910!  Go figure!  Mind you this is all empirical evaluation using nothing but 
my ears.  I have heard the filter in the 3731 is better than most.  I will be 
shipping some of my dc's soon to a fellow who can give a very accurate 
evaluation on these devices.  Hope this helps Luc, see you on S band! 

73 Bob W7LRD 




----- Original Message ----- 
From: "Luc Leblanc" <luclebla...@videotron.ca> 
To: amsat-bb@amsat.org 
Cc: eu-am...@yahoogroups.com 
Sent: Tuesday, April 20, 2010 6:14:17 AM GMT -08:00 US/Canada Pacific 
Subject: [amsat-bb] Re: AO-51 V/S 

On 20 Apr 2010 at 2:24, Bob- W7LRD wrote: 

Date sent:              Tue, 20 Apr 2010 02:24:55 +0000 (UTC) 
From:                   Bob- W7LRD <w7...@comcast.net> 
Subject:                [amsat-bb]  AO-51 V/S 
To:                     amsat...@amsat.org 

> 
> 
> This last pass worked W6YX and heard Kerry, WC7V.  Noticed some very deep 
> fades. 
> 
> 73 Bob W7LRD 

Did anyone ever tested their downconverter who is basically a receiver to 
measure the amouint of desense the WI-FI , spread spectrum and 
frequency hopper device and so on produce on 2.4Ghz? 

Desense is very noticeable on VHF and UHF when a transmitter is transmitting 
near a receiver as per i can see on a PCR-1000 scope screen 
there is always a 10db noise floor but i'm not sure if this level is not really 
much higher as the scope seems to not be fast enough to 
display the real peak level of all the signal on 2.4Ghz. 

If a fairly high amount of desense is always present this could explain why the 
downconverter is lacking sensitivity and why some normal 
fades appears deeper than they really are. And what is worse is the WI-FI QRM 
is also right on the received 2.4Ghz amateur band. 

Here i have to switch off my WI-FI router and my 2.4Ghz camera when i want to 
listen on 2.4Ghz and the camera is the worse as she give 30 
over 9 very wide  spread signal. 

Opinions are welcome. 


"-" 


Luc Leblanc VE2DWE 
Skype VE2DWE 
www.qsl.net/ve2dwe 
DSTAR urcall VE2DWE 
WAC BASIC CW PHONE SATELLITE 

  

_______________________________________________ 
Sent via amsat...@amsat.org. Opinions expressed are those of the author. 
Not an AMSAT-NA member? Join now to support the amateur satellite program! 
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb 
_______________________________________________
Sent via amsat...@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Reply via email to