This sounds more like a problem with the calibration pot(s) within the control box. The control box has a set for the meters and another set for the digital/computer control of the rotator. I would expect the meters to also read incorrectly if the pot in the rotor was a problem.
Reid, W4UPD Amsat #17002 On 2/7/2011 11:16 AM, Dave Webb KB1PVH wrote: > The display on the control box reads correct elevation, but on my digital > display on the Easy Rotor Controller shows erratic elevation position. I > have recalibrated it several times with no success. It won't read any > elevation until it is around 20° give or take. It also seems to have become > worse since our really cold temps set in. My best guess is the pot in the > rotor, but not sure where to start in the process. > > Thanks in advance > > Dave - KB1PVH > > Sent from my Verizon Wireless DROID X > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
