Yep, I found some on eBay that are advertised as 54mm / 2-1/8" from a "Mini Shop" in England. Since I live so close to Yaesu, I think I'll drive over there after work Tuesday and see if they have them in stock.
73, Jim On 07/04/2011 01:30 AM, Gary "Joe" Mayfield wrote: > Muffler clamps. There are some that fit perfectly and work great! > > 73, > Joe kk0sd > > -----Original Message----- > From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On > Behalf Of Jim Jerzycke > Sent: Sunday, July 03, 2011 2:20 PM > To: amsat-bb@amsat.org > Subject: [amsat-bb] G-5400/5500 Cross-Boom U-Bolts > > Greetings, all > > I'm "improving" my elevation rotor setup, and I'm wondering what others > are using to secure the cross-boom inside the elevation rotor. > > I've been using stainless hose clamps, and they work kinda-sorta OK, but > have a tendency to slip. I'd really like to get either some proper size > u-bolts, or the part numbers from the clamps Yaesu supplies with the rotor. > > They appear to be 54mm / 2-1/8" inside-the-legs, and I'm coming up blank > on searching for some. > > There are no part numbers for the clamps in the manuals I have for the > rotors. > > I have FOUR elevation rotors, and NO clamps! > > Seems like the clamps always get lost when people take these apart to sell. > > Thanks! > > 73, Jim KQ6EA > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
