Hi Stefano, IW1RDZ If both rotators would be same models or at least would be of the same type (North or south) and same azimuth voltage feed back 0 to 5 volt DC from the inside 500 ohm linear potentiometer then there are no problems with just switching the two rotators lines.
73" de i8CVS Domenico ----- Original Message ----- From: "Stefano Simonetti" <iw1...@yahoo.it> To: <amsat-bb@amsat.org> Sent: Friday, July 15, 2011 11:34 PM Subject: [amsat-bb] 2 AZ rotators with LVB tracker > I built with success an LVB tracker control to remote control an AZ rotator. > > I would like to control with the same circuit also another AZ rotator, not > simultaneously with the actual I use. > > Any one experienced this? > > I think it could work with just switching the two rotators lines (turn > right,turn left, azimuth voltage), if they would be same models or at least > would be of the same type (North or south) and same azimuth voltage return. > > But I think that this last thing (voltage return) could be the real problem to > have correct indication of direction between the rotators. > > Probably it is time to make another LVB tracker PCB... > > Ideas? > > 73 de Iw1rdz - Steve > > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
