On Aug 6, 2011, at 3:00 PM, amsat-bb-requ...@amsat.org wrote: > Send AMSAT-BB mailing list submissions to > amsat-bb@amsat.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://amsat.org/mailman/listinfo/amsat-bb > or, via email, send a message with subject or body 'help' to > amsat-bb-requ...@amsat.org > > You can reach the person managing the list at > amsat-bb-ow...@amsat.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of AMSAT-BB digest..." > > > Today's Topics: > > 1. Re: ARISSatTLM (Mark L. Hammond) > 2. VS: ARISSatTLM (Jari Koivurinne) > 3. Re: ARISSatTLM (N0JY) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 06 Aug 2011 13:44:40 -0400 > From: "Mark L. Hammond" <marklhamm...@gmail.com> > Subject: [amsat-bb] Re: ARISSatTLM > To: n...@arrl.net, AMSAT-BB@amsat.org > Message-ID: <h5ks1h00756cfur055k...@gmail.com> > Content-Type: text/plain; charset="us-ascii" > > Hi Jerry, > > Is there anything between the speaker out and line in (or mic) on the sound > card? > > What are you using for radio/Doppler control? > > Mark N8MH > > At 11:31 AM 8/6/2011 -0500, N0JY wrote: >> I'm having trouble getting telemetry. >> ARISSatTLM will see the signal on the Tuning Indicator and I have tuned >> the CW signal everywhere from the yellow mark to the top and bottom of >> the blue range. >> It decodes the CW fine in the Morse Code Decoder window but nothing ever >> shows up in the Telemetry As Text or ARISSatTLM main window. >> The orange indicator is following something, usually hanging around the >> middle of the orange line range when there is a signal. >> Any thoughts? Windows Vista SP2 with M-Audio Delta44 sound card set for >> 48000Hz sample rate. >> >> Thanks! >> Jerry >> N0JY >> >> Make sure your receiver has any noise filters turned off. They can prevent the decoder sw from working.
>> __________ Information from ESET NOD32 Antivirus, version of virus signature >> database 6356 (20110806) __________ >> >> The message was checked by ESET NOD32 Antivirus. >> >> http://www.eset.com >> >> >> >> _______________________________________________ >> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. >> Not an AMSAT-NA member? Join now to support the amateur satellite program! >> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > > > ------------------------------ > > Message: 2 > Date: Sat, 6 Aug 2011 17:51:37 -0000 > From: "Jari Koivurinne" <jari.koivuri...@aina.net> > Subject: [amsat-bb] VS: ARISSatTLM > To: <n...@arrl.net>, <AMSAT-BB@amsat.org> > Message-ID: <000c01cc5461$7d2e50d0$778af270$@koivuri...@aina.net> > Content-Type: text/plain; charset="us-ascii" > >> >> I'm having trouble getting telemetry. >> ARISSatTLM will see the signal on the Tuning Indicator and I have tuned >> the CW signal everywhere from the yellow mark to the top and bottom of >> the blue range. >> It decodes the CW fine in the Morse Code Decoder window but nothing >> ever >> shows up in the Telemetry As Text or ARISSatTLM main window. >> The orange indicator is following something, usually hanging around the >> middle of the orange line range when there is a signal. >> Any thoughts? Windows Vista SP2 with M-Audio Delta44 sound card set >> for >> 48000Hz sample rate. >> >> Thanks! >> Jerry >> N0JY >> > > > I was also having trouble getting telemetry. Signal was quite strong and > all indicators was within range. The telemetry and CW stopped twice within > pass. CW was decoded but maybe the deep QSB made some impact to the > telemetry. > I have 2x 17 el horizontal yagis, FT-847 and Realtek AC97 audio system. > Sampe rate was 44.1 kHz. > Next time I try Edirol UA-1 USB sound card. Have to set alarm clock at 4 am > local time as this is the only time ISS is well above horizon... :-) > > And please try the ARISSatTLM software and decode some frames as it is no > help if you just say you can hear some noise... > > -jari oh3uw > > > > > > ------------------------------ > > Message: 3 > Date: Sat, 06 Aug 2011 13:03:23 -0500 > From: N0JY <n...@lavabit.com> > Subject: [amsat-bb] Re: ARISSatTLM > To: "Mark L. Hammond" <marklhamm...@gmail.com> > Cc: AMSAT-BB@amsat.org > Message-ID: <4e3d81eb.50...@lavabit.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Mark, > > I'm using the speaker output so it's speaker audio with no additional > filters, right to the Delta44 breakout box. > SatPC32 does the doppler, it's set for 20Hz interval. Should I set that > lower, to 10Hz perhaps? > I am going to try to use the audio from the data output on the FT-736R. > A brain fade on my part prevented me from getting the signal off the > ring of the stereo connection, but I just woke up and remembered that I > have the splitters for that so I've got that connected to the breakout > box now! > > 73, > Jerry > > On 8/6/2011 12:44 PM, Mark L. Hammond wrote: >> Hi Jerry, >> >> Is there anything between the speaker out and line in (or mic) on the sound >> card? >> >> What are you using for radio/Doppler control? >> >> Mark N8MH >> > > > __________ Information from ESET NOD32 Antivirus, version of virus signature > database 6356 (20110806) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > > > > ------------------------------ > > _______________________________________________ > Sent via amsat-bb@amsat.org. Opinions expressed are those of the author. > Not an AMSAT member? Join now to support the amateur satellite program! > http://amsat.org/mailman/listinfo/amsat-bb > > > End of AMSAT-BB Digest, Vol 6, Issue 438 > **************************************** _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
