Hi Carl, I have not used AGWPE before as a TNC. How does it output it's data? A virtual serial port?
--Jamie, KF6RFX On Fri, Oct 28, 2011 at 10:59 AM, Carl Rimmer W8KRF <w8...@w8krf.net> wrote: > I have installed the RAX-2 decoding software hoping to be able to copy and > decode the telemetry. I am using a TS-2000 with a SignaLink USB and AGWPE > as the TNC. I am not able to get the software to recognize this set up. I > have AGWPE setup in Kiss Simple mode at 9600 Baud. (I use the SignaLink > with the ARISSATTLM software and it works fine.) Can anyone tell me if this > setup will work with the RAX-2 software? If so, what am I not doing or > doing wrong? > > Thanks and 73, > -- > *Carl W8KRF* > ______________________________**_________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: > http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo/amsat-bb> > _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb