Bruce, try Object D ...
73 Mike DK3WN -----Ursprüngliche Nachricht----- Von: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] Im Auftrag von Bruce Robertson Gesendet: Mittwoch, 15. Februar 2012 21:55 An: AMSAT-BB Betreff: [amsat-bb] Re: MASAT-1 I just tried F and G. G was the better fit, with a 80+ deg. pass, it held up pretty well against the doppler, though not perfectly. 73, Bruce On Wed, Feb 15, 2012 at 3:11 PM, Bruce Robertson <ve9...@gmail.com> wrote: > Had a blast collecting telemetry for MaSat-1 just now. I used object > C, which was not correct for doppler. Judging by the point at which > the signal ended on my clear horizon, I think it might be > F or G. > > For those who are new to the software, I'd note that the strongest > signal on the waterfall is the one that should be aligned > approximately with the 575 Hz mark. It is quite tolerant of your being > off by a 100 Hz or so, I'd say. I also think that the CW signal should > be on the 1200 Hz mark (i.e., don't tune the CW to a typical CW tone, > which is around 600 Hz). > > Does anyone know how close to the upper and lower marks I can set my > filter on the TS-2000? > > 73, Bruce > > -- > http://ve9qrp.blogspot.com -- http://ve9qrp.blogspot.com _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
