Hi Michael,
Are you using any software to work the Satellites?
For example Ham Radio Deluxe or SatPC32.
I tried to get it working with HRD and it is not possible on the other
hand
with SatPC32 it is working like a charm.
So give it a try
73 Jan PE0SAT
On 01-09-2012 16:47, Michael J. Wolthuis wrote:
Good morning Amsat,
I have been struggling this morning to work SO-50 from an FT-847 and
wondering if I am missing something.
I had a 26deg pass today and could hear everyone fine.
I am transmitting on 145.8500 +/- auto Doppler correction. I am
using PL
encode set in the radio on 67hz. I have the transmit on the subband
and
receive on the main band.
Am I missing something simple? I couldn't seem to get into the
satellite
today no matter what I did.
I have never been able to work SO-50. This same setup performed
flawlessly
on AO-51. My only thought is the CTCSS tone is not being generated
or is
not transmitting on the SUB Band? It does state ENC for Tone Encode
on the
FT-847 sub band.
Curious what the list thinks I may have wrong? I really want to get
active
on SO-50 for the rest of the summer.
Thanks for any thoughts, ideas, past gotchas, etc..
Mike
Kb8zgl
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the
author.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
--
With regards PE0SAT
Internet web-page http://www.pe0sat.vgnet.nl/
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb