Jim, In the past I have used MixW, which emulates a KISS TNC out a serial port, which can then be piped via real or virtual ports to the software. Worked fine at both 1200 and 9600 baud. I think there is a 15 or 30 day free trial. AGWPE has also been reported to work, though I have not tried it. Unfortunately my current wonder-rig does not currently allow 9600 baud, though they are going to have that capability Real Soon Now.
73s, Alan WA4SCA -----Original Message----- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Jim List Sent: Tuesday, February 26, 2013 11:08 AM To: 'Mark L. Hammond'; 'Bill Ress'; amsat-bb@amsat.org Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba Hi Mark, Thanks for this. Do you have any idea if there is a suitable software based TNC?? 73s Jim G3WGM > -----Original Message----- > From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On > Behalf Of Mark L. Hammond > Sent: 26 February 2013 00:35 > To: Bill Ress; amsat-bb@amsat.org > Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba > > Hi Bill and Other Folks, > > To decode STRaND-1: > > 1-Sprint-2 TNC at 9600 baud in KISS mode (or any 9600 in KISS mode > probably) > > For software, thank DK3WN of course! > > 2-Using this software to capture: > http://www.dk3wn.info/files/online_kiss_plus.zip > > 3-And using this software to decode the captured KISS files: > http://www.dk3wn.info/files/kissdump.zip > > 73, > > Mark N8MH > > > At 04:22 PM 2/25/2013 -0800, Bill Ress wrote: > >Hi Mark, > > > >What are you using to copy/decode the telemetry? > > > >Regards...Bill - N6GHz > > > >-----Original Message----- > >From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] > On > >Behalf Of Mark L. Hammond > >Sent: Monday, February 25, 2013 3:36 PM > >To: Hector, CO6CBF; amsat-bb@amsat.org > >Subject: [amsat-bb] Re: STRaND-1 and AAUSAT3 heard in Cienfuegos, Cuba > > > >Congrats, Hector. > > > >I printed several STRaND-1 packets and need to figure out what to do > >with them ;) > > > >Which TLEs did you use? Based on timestamps and scrolling time back > in > >SatPC32, it looks to me like the bird might be behind the pre-launch > >keps I'm using. Meaning, I see packets time stamped at the predicted > >LOS. I was NOT in the shack, but that's my guess based on time > stamps. > > > >73, > > > >Mark N8MH > > > >At 06:04 PM 2/25/2013 -0500, Hector, CO6CBF wrote: > >>Hello All > >> > >>On the 22:36 UTC pass both STRaND-1 and AAUSAT3 have been heard in > >>Cienfuegos city (EL92sd). I was running a FUNcube Dongle with > >>SDR-Radio > >>V1.5 and a homebrew ARROW antenna with a homebrew preamplifier. The > >>STRaND-1 beacon has a great signal (S9+). > >> > >>Congratulations to the STRaND-1 and AAUSAT3 teams for the great job! > >> > >>73! > >> > >>Hector, CO6CBF > >>EL92sd > >> > >> > >>_______________________________________________ > >>Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the > author. > >>Not an AMSAT-NA member? Join now to support the amateur satellite > program! > >>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > >_______________________________________________ > >Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the > author. > >Not an AMSAT-NA member? Join now to support the amateur satellite > program! > >Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the > author. > Not an AMSAT-NA member? Join now to support the amateur satellite > program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb