Hi Pete, You need to put the TNC into KISS mode before running their software. At least that is the case here with a Paccomm TNC. Make the com port settings match your system (port number, baud).
No need for any port emulators. It works OK here. 73, Mark N8MH At 07:13 PM 11/22/2013 -0500, Peter Portanova wrote: >Hello, Itâs been some time that I linked my TNC to a dashboard output, and I >honestly forgot the setup. I know that the TNC needs to be in KISS mode and >there might be a serial port emulator in the setup. If anyone can give me >some guidance on the required steps to allow the TNC to talk to the KYSat >dashboard I would be very grateful, thank you. 73 Peter WB2OQQ >_______________________________________________ Sent via AMSAT-BB@amsat.org. >Opinions expressed are those of the author. Not an AMSAT-NA member? Join now >to support the amateur satellite program! Subscription settings: >http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
