Floyd,
Makes perfect sense. I wonder why, when ISS is selected,
SatPC32 does not
configure the radio to a single VFO with a non-standard
repeater offset,
rather than loading 2M into both VFOs in satellite mode.
Should I have taken it out of Satellite mode manually?
Something to research.
Bill
-----Original Message-----
From: Floyd Rodgers
Sent: Tuesday, July 01, 2014 8:50 AM
To: Bill (W1PA) ; amsat-bb@amsat.org
Subject: Re: [amsat-bb] AMSAT FD 2014 debrief
The 847 does not allow dual in band operation. If you think
about it you
would need very respectable filtering more than 100db
isolation between
the transmitter and receiver to be able to pull this off. In
effect you
are asking it to be a repeater. It can do this only when
transmit and
receive frequencies are not on the same band because then it
only has to
deal with the much smaller 3rd harmonic signal.
On 6/30/2014 9:57 PM, Bill (W1PA) wrote:
When I tried to run the ISS passes (2m up and down), the
2nd VFO on the FT-847
came up "reset" in the rig display when SatPC pushed the
frequencies over -- is that a rig issue or SatPC issue I
need to discuss with Erich?
_______________________________________________
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
