On 5/29/06,
Harry Vennik <[EMAIL PROTECTED]> wrote:
I know the bug was there for quite some time before I officially entered the
team, so I think it is very likely that the bug was introduced either in rev.
6511 or 6513. (Both from date April 29th, 2006 and with a change in
capture.c).
Harry
Op maandag 29 mei 2006 14:11, schreef Vivia Nikolaidou:
> Follow GrdScarabe's instructions to get older SVNs and try to see when
> the bug appeared.... this might help us understand where it comes
> from. :)
>
> On 5/28/06, Cristian Peraferrer <[EMAIL PROTECTED]> wrote:
> > Well not so fast... I was using the "stable" 10.0.12 pwc driver for a
> > several time, and I never experimented that issue. Today I've tested it
> > with the (old) 10.0.12 again (nowadays I use the most recent snapshot),
> > and the issue now appears!, with the actual aMSN. So I think it's not a
> > pwc driver bug, because in the past (when I was using stable pwc), this
> > bug was not present, but now, with the actual aMSN, it is (using the same
> > stable pwc driver I've used in the past).
> >
> > On Sunday 28 May 2006 13:30, Vivia Nikolaidou wrote:
> > > Always works perfectly with ov511, tested thousands of times on my
> > > side. Another person with spca5xx also confirmed that webcam is
> > > released correctly.
> > >
> > > So let's just assume it's a pwc bug? :)
> > >
> > > On 5/28/06, Harry Vennik <[EMAIL PROTECTED] > wrote:
> > > > About 'webcam not released': I can confirm this is true, and have
> > > > already searched through the code for the reason why this happens. It
> > > > *might* be related to the change from getimage() to nextframe(), but
> > > > I am not at all sure. Because all necessary calls seem to be done
> > > > correctly, which is approved by the fact that we have not had this
> > > > complaint often yet (so apparently things work well with other webcam
> > > > drivers), I think it is a pwc driver bug (not the first one eh...).
> > > >
> > > > I proofed that there is actually done a close() on the device:
> > > >
> > > > vid-open: trying: v4l2...
> > > > v4l2: open
> > > > v4l2: init
> > > > v4l2: device info:
> > > > pwc 10.0.11 / Logitech QuickCam Pro 4000 @ usb-0000:00: 10.2-2
> > > > v4l2: close
> > > > vid-open: ok: v4l2
> > > > vid-open: flags: 2
> > > > v4l2: open
> > > > ng_dev_open: opened Logitech QuickCam Pro 4000 [refcount 1]
> > > > v4l2: new capture params (320x240, YU12, 115200 byte)
> > > > convert-in : 320x240 12 bit YUV 4:2:0 (planar)
> > > > convert-out: 320x240 24 bit TrueColor (BE: rgb)
> > > > v4l2: buf 0: video-cap 0x0+460800, used 115200
> > > > v4l2: buf 1: video-cap 0x71000+460800, used 115200
> > > > v4l2: start ts=1148814415628311000
> > > > v4l2: buf 0: video-cap 0x0+115200, used 115200
> > > > v4l2: buf 1: video-cap 0x71000+115200, used 115200
> > > > v4l2: close
> > > > ng_dev_close: closed Logitech QuickCam Pro 4000 [refcount 0]
> > > > v4l2: fini
> > > >
> > > > The line of code printing 'v4l2: close' is right before the actual
> > > > close() in the code.
> > > >
> > > > Op zondag 28 mei 2006 11:54, schreef Sander Hoentjen:
> > > > > corellian if I stop sending my webcam (using pwc driver), aMSN
> > > > > still reads or uses /dev/v4l/video0 corellian until I reset aMSN
> > > > > corellian that means, I only can send webcam one time, then I have
> > > > > to reset aMSN to send to another person, or send again to the same
> > > > > person. corellian that's the 'lsof' output, when I'm not sending
> > > > > webcam, but I've used it: corellian wish 29227 corellian mem
> > > > > CHR 81,0
> > > > > 44270654 /dev/v4l/video0 corellian wish 29227 corellian mem
> > > > > REG 3,8 73472 845256
> > > > > /home/corellian/amsn/utils/linux/capture/libng/plugins/drv0- v4l2.so
> > > > > corellian wish 29227 corellian mem REG 3,8
> > > > > 44960 845259
> > > > > /home/corellian/amsn/utils/linux/capture/libng/plugins/drv1- v4l.so
> > > > > corellian wish 29227 corellian mem REG 3,8
> > > > > 85852 845236 /home/corellian/amsn/utils/webcamsn/webcamsn.so *
> > > > > march1980 has quit (Read error: 110 (Connection timed out))
> > > > > corellian and, when I send and receive, sometimes says that's
> > > > > rejected, but that's not rejected/cancelled! corellian well I hope
> > > > > any devel will read this :S
> > > >
> > > > _______________________________________________
> > > > Amsn-devel mailing list
> > > > [email protected]
> > > > https://lists.sourceforge.net/lists/listinfo/amsn-devel
> >
> > --
> > GPG Key-ID: 0x564903FA - JID: [EMAIL PROTECTED]
> >
> >
> > _______________________________________________
> > Amsn-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/amsn-devel
_______________________________________________
Amsn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/amsn-devel
--
Maxime VERZIER (www.billets-orientes.com / www.verzier.info)
_______________________________________________ Amsn-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/amsn-devel
