Dear Ravi,
I checked the error introduction and found the error might be
caused by the file format mismatched.
Here, the frame format comes from the camerahardware.cpp has changed
into RGB565 in order to make it display in the right way, while the
default PV SetInputFormat is YUV420.
And I can't find the responding format of RGB565 in
pvmf_videoenc_node.cpp, and even can't find where to set the PV input
format.
So I had to come back to you and wish can get the help from you.
Thanks again！
On 7月10日, 下午9时58分, RaviY <[email protected]> wrote:
> pvmi/pvmf/include/pvmf_return_codes.h
>
> On Jul 10, 3:21 am, Jack <[email protected]> wrote:
>
>
>
> > Hi,Ravi
> > I tried to fill the functions by myself but still can't fix it. Now I
> > can enter the preview mode of video recorder, but the function got
> > crushed every time I press the start key.
> > And I got the log below:
>
> > ......
> > D/CameraService( 55): startCameraMode(1)
> > D/CameraHardware( 55): CameraHardware startRecording:
> > D/CameraHardware( 55): vendor/marvell/marvell_310/libcamera/
> > CameraHardware.cpp startRecording 761
> > E/PVAE ( 55): PVAuthorEngine::HandleNodeInformationalEvent
> > E/PVAE ( 55): PVAuthorEngine::HandleNodeInformationalEvent sends
> > unknown eventType:24
> > E/PVAE ( 55): PVAuthorEngineNodeUtility::NodeCommandCompleted
> > E/PVAE ( 55): PVAuthorEngineNodeUtility::CompleteStateTransition
> > E/PVAE ( 55): PVAuthorEngineNodeUtility::CompleteStateTransition:
> > return PVMFSuccess
> > E/PVAE ( 55): PVAuthorEngineNodeUtility::CompleteUtilityCmd:
> > aCmd.iType=7, aStatus=0x1
> > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted
> > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted cmdType:14
> > E/PVAE ( 55): PVAuthorEngineNodeUtility::GetCommandQueueSize:
> > size=0
> > E/PVAE ( 55): PVAuthorEngine::SetPVAEState: aState=3
> > E/PVAE ( 55): PVAuthorEngine::CompleteEngineCommand: aStatus=0x1,
> > aResponseData=0x0, aResponseDataSize=0
> > V/AuthorDriver( 55): Command (14) completed with status(1)
> > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted: Exit
> > E/PVAE ( 55): PVMFVideoEncPort::HandlePortActivity: type=5
> > E/PVAE ( 55): PVMFVideoEncPort::Run
> > E/PVAE ( 55): PVMFVideoEncNode::ProcessIncomingMsg: aPort=0x1acc8
> > E/PVAE ( 55): PVMFVideoEncPort::HandlePortActivity: type=4
> > E/PVAE ( 55): PVMFVideoEncPort::Run
> > E/PVAE ( 55): PVMFVideoEncPort::HandlePortActivity: type=5
> > E/PVAE ( 55): PVMFVideoEncPort::Run
> > E/PVAE ( 55): PVMFVideoEncNode::ProcessIncomingMsg: aPort=0x1acc8
> > E/PVAE ( 55): PVMFVideoEncPort::HandlePortActivity: type=4
> > E/PVAE ( 55): PVMFVideoEncPort::Run
> > E/PVAE ( 55): PVAuthorEngine::HandleNodeErrorEvent
> > E/PVAE ( 55): PVAuthorEngine::SetPVAEState: aState=5
> > E/AuthorDriver( 55): HandleErrorEvent(-16)
> > V/MediaRecorder( 216): message received msg=1, ext1=1, ext2=-16
> > V/MediaRecorder( 216): callback application
> > V/MediaRecorder( 216): back from callback
> > ........
>
> > I don't know what's the meaning of HandleErrorEvent(-16), would you
> > please help me to decipher it ?
> > Thank you very much!
>
> > On 7月8日, 下午5时48分, RaviY <[email protected]> wrote:
>
> > > What is the frame size that you are trying to encode? What is the
> > > frame rate?
>
> > > -Ravi
>
> > > On Jul 8, 4:27 am, Jack <[email protected]> wrote:
>
> > > > Thank you RaviY! I fix the problem and get into the preview mode now!
> > > > Thank you very much for your help! But now I get an error when I press
> > > > start.
> > > > Would you please help me to fix it?
>
> > > > here is the log:
>
> > > > E/PVAE ( 55): PVMFVideoEncNode::Start
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::Run: Exit
> > > > E/PVAE ( 55): PVMFVideoEncNode::Run
> > > > E/PVAE ( 55): PVMFVideoEncNode::DoStart
> > > > E/PVAE ( 55): PVMFVideoEncNode::DoPrepare:
> > > > CommonVideoEncoder::Initialize failed
> > > > E/PVAE ( 55): PVMFVideoEncNode::CommandComplete: Id=10006,
> > > > Type=6, Status=-1, Context=0x0, Data0x0
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::NodeCommandCompleted
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::NodeCommandCompleted:
> > > > Command failed - context=0x0, status=0xffffffff
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::CompleteUtilityCmd:
> > > > aCmd.iType=7, aStatus=0xffffffff
> > > > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted
> > > > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted cmdType:14
> > > > E/PVAE ( 55): PVAuthorEngine::SetPVAEState: aState=5
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::GetCommandQueueSize:
> > > > size=1
> > > > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted
> > > > E/PVAE ( 55): PVAuthorEngine::NodeUtilCommandCompleted cmdType:14
> > > > E/PVAE ( 55): PVAuthorEngine::SetPVAEState: aState=5
> > > > E/PVAE ( 55): PVAuthorEngineNodeUtility::GetCommandQueueSize:
> > > > size=0
> > > > E/PVAE ( 55): PVAuthorEngine::CompleteEngineCommand:
> > > > aStatus=0xffffffff, aResponseData=0x0, aResponseDataSize=0
> > > > V/AuthorDriver( 55): Command (14) completed with status(-1)
> > > > E/MediaRecorder( 285): start failed: -2147483648
>
> > > > On 7月7日, 下午9时12分, RaviY <[email protected]> wrote:
>
> > > > > All static libraries that you are adding should go inside
> > > > > LOCAL_WHOLE_STATIC_LIBRARIES of libopencoreauthor.
>
> > > > > On Jul 7, 7:08 am, Jack <[email protected]> wrote:
>
> > > > > > Yes, here's my android.mk in
> > > > > > external\opencore\nodes\pvvideoencnode\
> > > > > > ......
> > > > > > LOCAL_MODULE := libpvvideoencnode
>
> > > > > > LOCAL_CFLAGS := $(PV_CFLAGS)
>
> > > > > > LOCAL_C_INCLUDES := \
> > > > > > $(PV_TOP)//nodes/pvvideoencnode/include \
> > > > > > $(PV_TOP)//nodes/pvvideoencnode/src \
> > > > > > $(PV_INCLUDES) \
> > > > > > $(PV_TOP)//codecs_v2/video/m4v_h263/enc/include
>
> > > > > > LOCAL_STATIC_LIBRARIES +=libpvm4vencoder
>
> > > > > > # This lib defines the class CPVM4VEncoder
>
> > > > > > ......
>
> > > > > > On 7月7日, 下午7时49分, RaviY <[email protected]> wrote:
>
> > > > > > > Did you check if the library that defines the function
> > > > > > > CPVM4VEncoder
> > > > > > > is part of the shared library as well?
>
> > > > > > > On Jul 7, 6:47 am, RaviY <[email protected]> wrote:
>
> > > > > > > > -----Original Message-----
> > > > > > > > From: [email protected]
> > > > > > > > [mailto:[email protected]]
> > > > > > > > Sent: Tue 7/7/2009 5:43 AM
> > > > > > > > To: Ravi K. Yenduri
> > > > > > > > Subject: Re: Prepare failed in MediaRecorder
>
> > > > > > > > Dear RaviY,
> > > > > > > > Thanks very much for your selfless help! I tried to
> > > > > > > > modify
> > > > > > > > the
> > > > > > > > Android.mk you mentioned in the last letter you sent, but
> > > > > > > > these's
> > > > > > > > still
> > > > > > > > somthing wrong happened and I can not even pass the building
> > > > > > > > system.
> > > > > > > > It is
> > > > > > > > said that the function named CPVM4VEncoder::New(int) called by
> > > > > > > > Dostart
> > > > > > > > ()
> > > > > > > > in pvmf_videoenc_node.cpp is undefined. In order to fix the
> > > > > > > > problem, I
> > > > > > > > had
> > > > > > > > to trouble you again. I will send the files that I changed as an
> > > > > > > > attachment in this letter. Would you please to check the
> > > > > > > > mistake out
> > > > > > > > and
> > > > > > > > tell me how to fix it? You can compare them with the original
> > > > > > > > version
> > > > > > > > from
> > > > > > > > cupcake_r1 and find the differences.
> > > > > > > > Thank you! And best regards for you!
>
> > > > > > > > On Jul 6, 7:56 am, RaviY <[email protected]> wrote:
> > > > > > > > > You may start looking
> > > > > > > > > here.http://android.git.kernel.org/?p=platform/external/opencore.git;a=blo...
>
> > > > > > > > > On Jul 6, 2:58 am, Jack <[email protected]> wrote:
>
> > > > > > > > > > Dear,RaviY,
> > > > > > > > > > I am glad to get your reply so soon. I tried to log
> > > > > > > > > > pvmf_videoenc_node.cpp and pvmf_videoenc_port.cpp, but it
> > > > > > > > > > seems that the two files are not included in the building
> > > > > > > > > > system. I
> > > > > > > > > > changed these two files and rebuilt the system.img,
> > > > > > > > > > but still get the same log as past. I just get in touch
> > > > > > > > > > with android
> > > > > > > > > > less than two months, so I don't know how it is going on
> > > > > > > > > > and what to
> > > > > > > > > > do to fix this problem.
> > > > > > > > > > Thanks again for your help!
>
> > > > > > > > > > On 7月4日, 下午9时13分, RaviY <[email protected]> wrote:
>
> > > > > > > > > > > Connect is failing. It probably is because of mismatched
> > > > > > > > > > > parameters.
> > > > > > > > > > > Get the logs of pvmf_videoenc_node.cpp and
> > > > > > > > > > > pvmf_videoenc_port.cpp.
> > > > > > > > > > > Also, try to attach the log file. It is easier to
> > > > > > > > > > > download and read.
>
> > > > > > > > > > > On Jul 3, 11:23 pm, Jack Little
> > > > > > > > > > > <[email protected]> wrote:
>
> > > > > > > > > > > > Dear RaviY,
> > > > > > > > > > > > Thank you very much for your help!
> > > > > > > > > > > > I logged the file nodes/pvomxvideoencnode/src/
> > > > > > > > > > > > pvmf_omx_videoenc_node.cpp, and got the following
> > > > > > > > > > > > result:
>
> > > > > > > > > > > > E/PVAE ( 55): PVMFVIdeoEncNode::DoPrepare
> > > > > > > > > > > > E/PVAE ( 55): PVMFOMXVideoEncNode::DoPrepare:
> > > > > > > > > > > > Initializing OMX
> > > > > > > > > > > > component and encoder for role video_encoder.h263
> > > > > > > > > > > > E/PVAE ( 55): PVMFOMXVideoEncNode::DoPrepare():
> > > > > > > > > > > > There are 0
> > > > > > > > > > > > components of role video_encoder.h263
> > > > > > > > > > > > E/PVAE ( 55): PVMFOMXVideoEncNode::DoPrepare(): No
> > > > > > > > > > > > component can
> > > > > > > > > > > > handle role video_encoder.h263 !
> > > > > > > > > > > > E/PVAE ( 55):
> > > > > > > > > > > > PVMFOMXVideoEncNode::CommandComplete: Id=10005,
> > > > > > > > > > > > Type=5, Status=-17, Context=0x0, Data=0x0
> > > > > > > > > > > > E/PVAE ( 55):
> > > > > > > > > > > > PVAuthorEngineNodeUtility::NodeCommandCompleted
> > > > > > > > > > > > E/PVAE ( 55):
> > > > > > > > > > > > PVAuthorEngineNodeUtility::NodeCommandCompleted:
> > > > > > > > > > > > Command failed - context=0x0, status=0xffffffef
> > > > > > > > > > > > E/PVAE ( 55):
> > > > > > > > > > > > PVAuthorEngineNodeUtility::CompleteUtilityCmd:
> > > > > > > > > > > > aCmd.iType=6, aStatus=0xffffffef
>
> > > > > > > > > > > > So, is that means I had to use a software
>
> ...
>
> 阅读更多 »- 隐藏被引用文字 -
>
> - 显示引用的文字 -
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"android-framework" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-framework?hl=en
-~----------~----~----~----~------~----~------~--~---
