Patrick, do you have an howto on how to port to MX31? do you use the standard freescale devkit? what about the kernel mods? is it plug'n play?
thanks! .l On Mar 24, 7:51 pm, patrick <[EMAIL PROTECTED]> wrote: > Dear, > Pls refer to the following link, it may help: > > http://groups.google.com/group/android-discuss/browse_thread/thread/b... > > Since I am not using Window, and not good at window as well, I > don't think I can help you that much, but goodLuck might help you. > > It may due to the network setting, just my guess. > > Regards > patrick > > On Mar 15, 8:20 pm, FengForky <[EMAIL PROTECTED]> wrote: > > > I encounted the same problem of "unkown host". > > My PC is WindowsXP + android-sdk_m5-rc15_windows. > > I connected to the internet by ADSL. I'm in Beijing,China. > > > How to solve it? > > > On Mar 6, 2:06 pm, patrick <[EMAIL PROTECTED]> wrote: > > > > Hi HuaDong: > > > I made it work. I have edited the file /etc/init.rc, so that > > > it wouldn't start any service and then a the folloing line to my > > > android start script: > > > > 1. /init & > > > 2. sleep 5 > > > 3. setprop net.eth0.dns1 192.168.1.250 > > > 4. setprop net.gprs.local-ip 192.168.1.122 > > > > For line 1, init has to put in the background, otherwise, it > > > will stop there > > > > For line 2, just make sure everything call by init is done > > > before setprop > > > > For line 3 and 4, setup the properties as you mentioned. > > > > Really thanks for your hints. > > > > BTW, have you ever tried the touchscreen? I am working on it > > > now, but seems a long way to go, as android doesn't response when i > > > click on the touchscreen. > > > > patrick > > > > On Mar 4, 4:07 pm, Liu Huadong <[EMAIL PROTECTED]> wrote: > > > > > you need set a dns property, > > > > [net.eth0.dns1]: [10.0.2.3] > > > > [net.gprs.local-ip]: [10.0.2.15] > > > > the above is for emulator, for hardware "net.gprs.dns1" > > > > > good lucky > > > > > On Mar 3, 8:46 pm, patrick <[EMAIL PROTECTED]> wrote: > > > > > > Dear All: > > > > > I have figured out the ping problem in the change root > > > > > environment, it was due to the missing libraries, after i copied the > > > > > libraries from the base system, it works fine. but it is strange, > > > > > because the busybox, i download it > > > > > fromhttp://benno.id.au/blog/2007/11/14/android-busybox, > > > > > is statically linked, it doesn't need any extra library. > > > > > > For the browser, it still reports "Nework Erro, unknow host" > > > > > > Can somebody help! > > > > > > patrick > > > > > > On Mar 3, 6:32 pm, patrick <[EMAIL PROTECTED]> wrote: > > > > > > > Dear All: > > > > > > I am trying to run android on myFreescaleMX31platform, it > > > > > > runs fine, but when I use the android browser to connect to the > > > > > > Internet, it complains about "network error, unknown host". > > > > > > > Android is run in a change root environment. Before running > > > > > > android, I have checked the network connection, it can access the > > > > > > Internet: > > > > > > > /mnt/usb/ramfs $ ifconfig > > > > > > eth0 Link encap:Ethernet HWaddr 00:90:FB:07:C6:00 > > > > > > inet addr:192.168.1.122 Bcast:192.168.1.255 Mask: > > > > > > 255.255.255.0 > > > > > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > > > > > > RX packets:201 errors:0 dropped:0 overruns:0 frame:0 > > > > > > TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 > > > > > > collisions:0 txqueuelen:1000 > > > > > > RX bytes:35243 (34.4 KiB) TX bytes:17755 (17.3 KiB) > > > > > > Interrupt:90 > > > > > > > /mnt/usb/ramfs $ route > > > > > > Kernel IP routing table > > > > > > Destination Gateway Genmask Flags > > > > > > Metric > > > > > > Ref Use Iface > > > > > > 192.168.1.0 * 255.255.255.0 U 0 > > > > > > 0 0 eth0 > > > > > > default xx.xxxxxxx.com 0.0.0.0 UG 0 > > > > > > 0 0 eth0 > > > > > > > /mnt/usb/ramfs $ ping yahoo.com > > > > > > PING yahoo.com (66.94.234.13): 56 data bytes > > > > > > 64 bytes from 66.94.234.13: icmp_seq=1 ttl=56 time=286.2 ms > > > > > > 64 bytes from 66.94.234.13: icmp_seq=2 ttl=55 time=187.2 ms > > > > > > 64 bytes from 66.94.234.13: icmp_seq=3 ttl=55 time=243.4 ms > > > > > > > After change root, it fails to ping yahoo.com, but it is fine > > > > > > to > > > > > > ping by using IP directly: > > > > > > > # /data/busybox/busybox ping yahoo.com > > > > > > ping: bad address 'yahoo.com' > > > > > > > # /data/busybox/busybox ping 66.94.234.13 > > > > > > PING 66.94.234.13 (66.94.234.13): 56 data bytes > > > > > > 64 bytes from 66.94.234.13: seq=0 ttl=56 time=187.703 ms > > > > > > 64 bytes from 66.94.234.13: seq=1 ttl=55 time=182.139 ms > > > > > > > I have tried to do the same things in the android emulator, > > > > > > it > > > > > > can't even ping the host by using the IP, but i can connect to the > > > > > > Internet by using the browser. > > > > > > > There is a resolv.conf file in the change root environment, > > > > > > which is the same as the one in the base file system. > > > > > > > I have check the boot up message by accessing the emulator's > > > > > > shell, there is not much information, it enables the IPv4 and GRE > > > > > > tunneling, which I think it maybe the reason, but it seems not, as I > > > > > > also enable the tunneling in my kernel, it fails too. > > > > > > > Does anybody know how to solve this problem, pls kindly let > > > > > > me > > > > > > know. > > > > > > > Thanks in advance. > > > > > > > patrick- Hide quoted text - > > > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Android Internals" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/android-internals?hl=en -~----------~----~----~----~------~----~------~--~---
