Thank you for information! I dont' have access to rebuild the devices.c file in /system/init directory because that is a part of the Android build so I have come up with a shell script that will continously run and periodically check for the to see if the device has been attached, then if it is attached I will run "netcfg". The Motorola Atrix (the phone I'm currently working with) doesn't have source or the ability to rebuild android (only replace the kernel).
-Ryan On Jul 6, 2:17 pm, hedwin <hedwin.kon...@gmail.com> wrote: > init is catching the kernel uevents. take a look at file devices.c in > system/init directory > > hedwin > > > > On Wed, Jul 6, 2011 at 3:15 PM, Ryan Barnett <ryanbarne...@gmail.com> wrote: > > Thanks! Running netcfg worked...that totally slipped my mind. Is there > > a way to automate this mapping besides having a service daemon script > > running looking for device to connect? Busybox is currently installed > > on the phone which includes mdev. mdev doesn't handle any of the > > device initialization since if I run "mdev -s" the phone will reboot. > > How does the Android kernel handle new device connections and how > > would I be able to have this USB ethernet device be automatically > > registered as a network interface? > > > Thanks, > > -Ryan > > > On Jul 1, 6:10 pm, Steve Modica <mod...@small-tree.com> wrote: > > > Did you run netcfg? > > > > Sent from my iPhone > > > > On Jul 1, 2011, at 4:16 PM, Ryan Barnett <ryanbarne...@gmail.com> wrote: > > > > > Hi, > > > > > I'm currently trying to get a USB ethernet device to appear as an > > > > interface on a rooted Motorola Atrix 4G from AT&T. The build number > > > > for this software is OLYFR_U4_1.2.6 with a kernel version of 2.6.32.9. > > > > I have the multimedia docking station (which has USB ports available) > > > > that Motorola has available for the phone. The USB ethernet device > > > > that I'm plugging into the phone registers correctly on a laptop that > > > > is running Ubuntu 10.10 and uses the generic cdc_ether driver. > > > > > Information I have gather thus far is from dmesg in which the > > > > following shows up: > > > > > <6>[ 77.227517] usb 1-1.3: new high speed USB device using tegra- > > > > ehci and address 4 > > > > <6>[ 77.276658] usb 1-1.3: New USB device found, idVendor=0525, > > > > idProduct=a4a2 > > > > <6>[ 77.276669] usb 1-1.3: New USB device strings: Mfr=1, Product=2, > > > > SerialNumber=0 > > > > <6>[ 77.276679] usb 1-1.3: Product: RNDIS/Ethernet Gadget > > > > <6>[ 77.276687] usb 1-1.3: Manufacturer: Linux 2.6.33.7-rt29 with > > > > musb_hdrc > > > > <6>[ 77.277117] usb 1-1.3: configuration #1 chosen from 2 choices > > > > <6>[ 77.288180] usb1: register 'cdc_ether' at usb-tegra-ehci.0-1.3, > > > > CDC Ethernet Device, fa:b5:e8:b3:5c:34 > > > > > Also I have found that the device is created at /sys/class/net/usb1 > > > > which really maps to /sys/devices/platform/tegra-ehci.0/ > > > > usb1/1-1/1-1.4/1-1.4:1.0/. If I do a cd into device (/sys/devices/ > > > > platform/tegra-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/net/usb1) the following > > > > information is in uevent: > > > > > DEVTYPE=usb_interface > > > > DRIVER=cdc_ether > > > > DEVICE=/proc/bus/usb/001/021 > > > > PRODUCT=525/a4a2/316 > > > > TYPE=2/0/0 > > > > INTERFACE=2/6/0 > > > > MODALIAS=usb:v0525pA4A2d0316dc02dsc00dp00ic02isc06ip00 > > > > > It seems that the cdc_ether driver is working correctly it is just > > > > that it is not being mapped as an interface (as far as ifconfig is > > > > concerned) since it doesn't appear if "busybox ifconfig" (or just > > > > ifconfig) is run. I know with most embedded systems mdev is used to do > > > > the mappings for the interface however it doesn't appear android uses > > > > mdev. My question is how does Android do the equilivant of mdev or > > > > mapping of interfaces? Or if that isn't pharse properly enough, how do > > > > I get this USB ethernet device to show up as an interface? I > > > > ultimately want these USB ethernet device to show up as "usb1" when I > > > > run "ifconfig" and right now it doesn't and I don't know how to get it > > > > to. > > > > > Thanks, > > > > -Ryan > > > > > -- > > > > unsubscribe: android-kernel+unsubscr...@googlegroups.com > > > > website:http://groups.google.com/group/android-kernel-Hide quoted > > text - > > > > - Show quoted text - > > > -- > > unsubscribe: android-kernel+unsubscr...@googlegroups.com > > website:http://groups.google.com/group/android-kernel- Hide quoted text - > > - Show quoted text - -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel