Hi All, The issue is not seen in Linux OS.From the bus logs,Windows Host does not sending the Set_Configuration Control Request.
Regards, Thirupathi.ch On Tue, Aug 9, 2011 at 4:33 PM, Thirupathi ch < thirupathi.chippakur...@sasken.com> wrote: > Hi All, > > RNDIS USB composite mode issue in *Windows xp sp3* Windows Driver Tree > shows *Andriod USB Ethernet/RNDIS.*even after disconnecting the > Cable.Please find the attached image shows the same. > > Since the the Windows XP drivers Tree Not getting updated,Re-enumeration > fails.Gadget not getting detected by Windows PC. > > Is any one seen this same kind of issue.Please let me know. > > Regards, > Thirupathi.ch > > On Tue, Feb 15, 2011 at 7:45 PM, Maulik Mankad <mankad.mau...@gmail.com>wrote: > >> On Mon, Feb 14, 2011 at 11:45 AM, Praveena Nadahally >> <nadahally.prave...@gmail.com> wrote: >> > Hello All, >> > >> > I need some help on RNDIS and USB Tethering using RNDIS. >> > >> > As windows doesn't support any other interfaces when RNDIS is enabled. >> > So, How should be the behaviour of RNDIS in the USB composite mode? Is >> > there any details available on this? >> > >> > 1) When the Tethering is enabled from the android menu, the following >> > actions are taken >> > a. Enable RNDIS >> > b. Disable Mass Storage and MTP (Why ACM (serial) and ADB are not >> > disabled?) >> > c. Soft Re-connect the USB so that the new configuration with RNDIS >> > is made available to PC. >> > >> > 2) When the Tethering is disabled from the MMI, the following actions >> > are taken >> > a. Disable RNDIS >> > b. Enable Mass Storage and MTP (Why ACM (serial) and ADB are not >> > enabled?) >> > c. Soft Re-connect the USB so that the new configuration with old >> > classes are made available to PC. >> > >> > The following has been observed while doing the 1.c >> > 1) Pre-Condition: Only RNDIS Class has been enabled in response to >> > Enable Tethering. >> > 2) Do Soft-Disconnect. >> > 3) Disconnect event is propagated to android. >> >> >> Which AFS are you using? >> Is this Disconnect UMS event captured in Tethering.java? >> >> I saw such a behaviour while adding UMS connect and DISCONNECT event >> notifications, in onReceive() function in Tethering.java. >> >> In our case USB connect event is based on ACTION_BATTERY_CHANGED intent. >> Is it the same case for you? >> >> Regards, >> Maulik >> >> -- >> unsubscribe: android-kernel+unsubscr...@googlegroups.com >> website: http://groups.google.com/group/android-kernel >> > > -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel