Yes!! both are enabled. Regards, Jagan.
2011/8/27 DanM <murpd...@gmail.com> > First are you sure DEBUG_LL is yes in your .config file. > Next did you enable EARLY_PRINTK? Check you .config file for this as > well > > On Aug 25, 5:46 am, jagan <402ja...@gmail.com> wrote: > > Thank you for your response. > > But the same setup is already there in my code. > > No clues I tried a lot...but... > > > > Thanks for your time, send if you found any info. > > > > Regards, > > Jagan > > > > 2011/8/25 Hemanth(ヘマント) <hemanth....@gmail.com> > > > > > > > > > > > > > > > > > Hi, > > > > > Please take a look at the CAF commit below. > > > (assuming you are using 8x60, even if not it should not be too > > > different) > > > > >https://www.codeaurora.org/gitweb/quic/le/?p=kernel/msm.git;a=commitd. > .. > > > > > On Aug 24, 9:27 pm, jagan <402ja...@gmail.com> wrote: > > > > Hi, as your saying I have some config like CONFIG_MSM_DEBUG_UART3 in > my > > > > platform. > > > > Even with this change also I couldn't get any logs. > > > > > > Due to very less info in google for msm I am unable to proceed > further. > > > > > > Could you help on this issue. > > > > > > Thanks for your time. > > > > > > Regards, > > > > Jagan > > > > > > On Tue, Aug 23, 2011 at 12:55 AM, jagan <402ja...@gmail.com> wrote: > > > > > Thanks Jon for your quick response. > > > > > But I know how it work with omap. > > > > > But I am working on msm platform, I couldn't find any debug_ll in > > > > > uncompressed.h > > > > > > > Request you to give any pointers. > > > > > > > BR, Jagan > > > > > > > On Tue, Aug 23, 2011 at 12:46 AM, Jon Pry <jon...@gmail.com> > wrote: > > > > > > >> if you are working on an omap platform, there are defines based on > > > > >> mach type in arch/arm/plat-omap/include/plat/uncompress.h that > have to > > > > >> be setup in order for debug_ll to actually work. presumably other > > > > >> platforms have similar requirements. > > > > > > >> On Mon, Aug 22, 2011 at 9:57 AM, jagan <402ja...@gmail.com> > wrote: > > > > >> > Hi All, > > > > > > >> > I am working on GB upgrade activity. > > > > > > >> > My device is not booting with kernel 35, It shows boot logo & > > > Struck. > > > > >> > I used to see the device status by enabling CONFIG_DEBUG_LL. > > > > > > >> > In general I will give some debug prints b/f kernel loading, but > I > > > > >> > didn't get > > > > >> > any prints on my serial console. > > > > > > >> > Request to any one pls suggest me sothat I can move further. > > > > > > >> > Thanks your time > > > > > > >> > Regards, > > > > >> > Jagan > > > > > > >> > -- > > > > >> > unsubscribe: android-kernel+unsubscr...@googlegroups.com > > > > >> > website:http://groups.google.com/group/android-kernel > > > > > > >> -- > > > > >> unsubscribe: android-kernel+unsubscr...@googlegroups.com > > > > >> website:http://groups.google.com/group/android-kernel > > > > > -- > > > unsubscribe: android-kernel+unsubscr...@googlegroups.com > > > website:http://groups.google.com/group/android-kernel > > -- > unsubscribe: android-kernel+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-kernel > -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel