Hi Amit, Why can't you use the toolchain from android directly. [prebuilt/ ...]
Regards, Jagan. On Wed, Feb 15, 2012 at 2:59 PM, raja pavan <rajain...@gmail.com> wrote: > I do not have an android emulator with me at this moment. > > Please install at your end and try. > > Raja > > > On Wed, Feb 15, 2012 at 2:56 PM, jagan <402ja...@gmail.com> wrote: > >> Does your kernel have CONFIG_AEABI=y? >> check it & try once. >> >> Regards, >> Jagan >> >> >> On Wed, Feb 15, 2012 at 2:51 PM, Amit kumar Bag >> <amitkumar...@gmail.com>wrote: >> >>> HI, >>> >>> I want to enable FDTI driver support in my android kernel. I followed >>> the below steps to enable the FTDI drivers >>> 1.make menuconfig ARCH=arm CROSS_COMPILE=arm-eabi- >>> and enable the FTDI single port serial driver inthe following path >>> >>> Device Drivers-> USB support -> USB serial converter support -> USB FTDI >>> single port serial Driver >>> 2.make ARCH=arm CROSS_COMPILE=arm-eabi- uImage >>> >>> But I am getting error while compilation the kernel. The error are as >>> follows >>> >>> scripts/kconfig/conf --silentoldconfig Kconfig >>> CHK include/linux/version.h >>> CHK include/generated/utsrelease.h >>> make[1]: `include/generated/mach-types. >>> h' is up to date. >>> CALL scripts/checksyscalls.sh >>> CHK include/generated/compile.h >>> UPD include/generated/compile.h >>> CC init/version.o >>> LD init/built-in.o >>> CC arch/arm/kernel/traps.o >>> /home/bagggami/amit/android-toolchain-eabi-2011/bin/arm-eabi-ld: >>> internal error in relocate_special_relocatable, at >>> /mnt/jenkins/workspace/linaro-android_toolchain-4.6-2011.12/build/objdir/../build/../binutils/binutils-2.22/gold/arm.cc:9850 >>> make[1]: *** [arch/arm/kernel/traps.o] Error 1 >>> make: *** [arch/arm/kernel] Error 2 >>> >>> >>> I am using android gingerbread source code having 3.0.1 kernel in that. >>> I downloaded the toolchain from the below location >>> >>> >>> http://android-build.linaro.org/builds/~linaro-android/toolchain-4.6-2011.12/5/android-toolchain-eabi-linaro-4.6-2011.12-5-2011-12-12_14-40-40-linux-x86.tar.bz2 >>> >>> and my target board in snowball board. >>> >>> How can I fix this error. >>> >>> Can somebody tell am I missing anything. >>> >>> Thanks in advance, >>> Amit Bag >>> >>> -- >>> unsubscribe: android-kernel+unsubscr...@googlegroups.com >>> website: http://groups.google.com/group/android-kernel >> >> >> -- >> unsubscribe: android-kernel+unsubscr...@googlegroups.com >> website: http://groups.google.com/group/android-kernel >> > > -- > unsubscribe: android-kernel+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-kernel > -- unsubscribe: android-kernel+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-kernel