Hi Berger, Thank you very much buddy for the immediate reply. It helped me a lot. Please add in wiki so it will help many people.
Loading Android :). Thanks, Ram. On Dec 5, 11:29 pm, "Cédric Berger" <[EMAIL PROTECTED]> wrote: > You have to modify u-boot env : > seehttp://lists.openmoko.org/nabble.html#nabble-td1458397 > (and search wiki. some examples of using setenv > :http://wiki.openmoko.org/wiki/Booting_from_SD#Add_uboot_boot_entry) > > | Andy Green wrote: > > |> Somebody in the thread at some point said: > |> | Latest uImage-android seems to be broken - uboot gives Bad data CRC > |> | message with it. > |> | Can anybody post some older uImage-android ? > |> > |> No this is caused by U-Boot's default environment only pulling in 2MB > |> from the NAND partition for kernel. Increase it like this -> > |> > |> setenv bootcmd setenv bootargs \${bootargs_base} \${mtdparts}\; nand > |> read.e 0x32000000 kernel 0x300000\; bootm 0x32000000 > |> saveenv > > On Fri, Dec 5, 2008 at 14:58, rams <[EMAIL PROTECTED]> wrote: > > NAND read: device 0 offset 0x80000, size 0x200000 > > 2097152 bytes read: OK > > ## Booting kernel from Legacy Image at 32000000 ... > > Image Name: Linux-2.6.28-rc4-mokodev > > Created: 2008-12-03 13:25:40 UTC > > Image Type: ARM Linux Kernel Image (uncompressed) > > Data Size: 2491904 Bytes = 2.4 MB > > Load Address: 30008000 > > Entry Point: 30008000 > > Verifying Checksum ... Bad Data CRC > > ERROR: can't get kernel image! --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [EMAIL PROTECTED] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
