Hi Xin
Maybe try android.console=/dev/ttymxc0,115200
On Mar 12, 5:45 pm, Justin <wenxinle...@gmail.com> wrote:
> Hail to all experts,
>
> I'm having the error message (bottom). Unlike others mine stopped at
> line "Warning: unable to open an initial console.".
> "...mydroid/out/target/product/generic/root" compiled into kernel
> kernel parameters using "noinitrd android.console=ttymxc1,115200
> ip=off".
> and I have the file system setup as:
>
> RedBoot> fis list
> ... Read from 0x07ee0000-0x07eff000 at 0x00080000: ..
> Name FLASH addr Mem addr Length Entry point
> RedBoot 0x00000000 0x00000000 0x00040000 0x00000000
> FIS directory 0x00080000 0x00080000 0x0001F000 0x00000000
> RedBoot config 0x0009F000 0x0009F000 0x00001000 0x00000000
> kernel 0x00100000 0x00100000 0x001E0000 0x00100000
> cramfs_system 0x00600000 0x00600000 0x01FE0000 0x00600000
> jffs2_data 0x02E00000 0x02E00000 0x00020000 0x02E00000
>
> <And the mx3_3stack.c>
>
> {
> .name = "nand.bootloader",
> .offset = 0,
> .size = 1024 * 1024},
> {
> .name = "nand.kernel",
> .offset = MTDPART_OFS_APPEND,
> .size = 5 * 1024 * 1024},
> {
>
> .name = "nand.cramfs_system",
> .offset = MTDPART_OFS_APPEND,
> .size = 40 * 1024 * 1024},
> {
> .name = "nand.jffs2_data",
> .offset = MTDPART_OFS_APPEND,
> .size = 56 * 1024 * 1024},
> {
> .name = "nand.configure",
> .offset = MTDPART_OFS_APPEND,
> .size = 8 * 1024 * 1024},
> {
> .name = "nand.userfs",
> .offset = MTDPART_OFS_APPEND,
> .size = MTDPART_SIZ_FULL},
>
> <init.rc as>
> # mount mtd partitions
> # Mount /system rw first to give the filesystem a chance to save a
> checkpoint
> mount cramfs /dev/block/mtdblock2 /system
> mount cramfs /dev/block/mtdblock2 /system ro remount
>
> # We chown/chmod /data again so because mount is run as root +
> defaults
> mount jffs2 /dev/block/mtdblock3 /data nosuid nodev
> chown system system /data
> chmod 0771 /data
>
> # Same reason as /data above
> mount yaffs2 m...@cache /cache nosuid nodev
> chown system cache /cache
> chmod 0770 /cache
>
> # This may have been created by the recovery system with odd
> permissions
> chown system system /cache/recovery
> chmod 0770 /cache/recovery
>
> Am I having a faulty Android kernel? Please comment, thanks.
>
> <Error msg>
> entry=0x80008000, target=0x80008000
> Using base address 0x00100000 and length 0x001d2114
>
> Uncompressing
> Linux.............................................................
> ............................................................ done,
> booting the k
> ernel.
> Linux version 2.6.24-335-g47af517 (x...@xin-desktop) (gcc version 4.2.3
> (Sourcery
>
> G++ Lite 2008q1-126)) #14 PREEMPT Thu Mar 12 13:38:31 GMT 2009
>
> CPU: ARMv6-compatible processor [4107b364] revision 4 (ARMv6TEJ),
> cr=00e5387f
> Machine: Freescale MX31/MX32 3-Stack Board
> Memory policy: ECC disabled, Data cache writeback
> CPU0: D VIPT write-back cache
> CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
> CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
>
> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> 32512
> Kernel command line: noinitrd console=ttymxc0,115200
> android.console=ttymxc1
> Unknown boot option `android.console=ttymxc1': ignoring
>
> MXC IRQ initialized
> PID hash table entries: 512 (order: 9, 2048 bytes)
> MXC GPT timer initialized, rate = 16625000
> Console: colour dummy device 80x30
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>
> Memory: 128MB = 128MB total
> Memory: 125824KB available (3328K code, 490K data, 264K init)
> - Hide quoted text -
>
> Mount-cache hash table entries: 512
> CPU: Testing write buffer coherency: ok
> net_namespace: 64 bytes
> NET: Registered protocol family 16
> L2X0 cache controller enabled
> CPU is i.MX31 Revision 2.0
> Clock input source is 26000000
> MXC GPIO hardware
> 3-Stack Debug board detected, rev = 0x0200
> Using SDMA I.API
> MXC DMA API initialized
> SCSI subsystem initialized
> CSPI: mxc_spi-0 probed
> CSPI: mxc_spi-1 probed
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> MXC I2C driver
> clk: Unable to get requested clock: dfm_clk
> mc13783 Rev 3.3 FinVer 0 detected
> PMIC RTC successfully probed
> PMIC Light successfully loaded
> MC13783 regulator successfully probed
> Device spi2.2 probed
> <6>PMIC Power successfully probed
> NET: Registered protocol family 2
> Time: mxc_gpt clocksource has been installed.
> IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> TCP established hash table entries: 4096 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 4096 bind 4096)
> TCP reno registered
> Low-Level PM Driver module loaded
> usb: Host 2 host (isp1504) registered
> usb: DR host (isp1504) registered
> usb: DR gadget (isp1504) registered
> DPTC driver module loaded
> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> mxc_ipu mxc_ipu: Channel already uninitialized 14
> Console: switching to colour frame buffer device 30x40
> mxc_ipu mxc_ipu: Channel already uninitialized 15
> mxcfb: fb registered, using mode Epson-VGA
> VGEN ID is 9
> VMMC ID is 20
> ch7024: TV encoder present: id = 45
> Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing
> disabled
> Serial: MXC Internal UART driver
> mxcintuart.0: ttymxc0 at MMIO 0x43f90000 (irq = 45) is a Freescale MXC
> console [ttymxc0] enabled
> mxcintuart.1: ttymxc1 at MMIO 0x43f94000 (irq = 32) is a Freescale MXC
> mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 18) is a Freescale MXC
> loop: module loaded
> smsc911x: Driver version 2007-07-13.
> eth%d: SMSC911x MAC Address: 00:04:9f:00:97:c5
> Linux video capture interface: v2.00
> MXC Video Output MXC Video Output.0: Registered device video16
> Driver 'sd' needs updating - please use bus_type methods
> MXC MTD nand Driver 2.1
> NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB
> 1,8V 8-bi
> t)
> RedBoot partition parsing not available
> Creating 6 MTD partitions on "NAND 256MiB 1,8V 8-bit":
> 0x00000000-0x00100000 : "nand.bootloader"
> 0x00100000-0x00600000 : "nand.kernel"
> 0x00600000-0x02e00000 : "nand.cramfs_system"
> 0x02e00000-0x06600000 : "nand.jffs2_data"
> 0x06600000-0x06e00000 : "nand.configure"
> 0x06e00000-0x10000000 : "nand.userfs"
> MXC MTD nand Driver 2.4
> usbmon: debugfs is not available
> Initializing USB Mass Storage driver...
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> MXC keypad loaded
> input: Unspecified device as /class/input/input0
> i2c /dev entries driver
> MXC WatchDog Driver 2.0
> MXC Watchdog # 0 Timer: initial timeout 60 sec
> IPU Post-filter loading
> SSI 1 module loaded successfully
> SSI 2 module loaded successfully
> PMIC Character device: successfully loaded
> PMIC Audio driver loading...
> PMIC Battery successfully probed
> PMIC Connectivity driver loading..
> hmp4e: init
> hmp4e: VGA encoder initialized
> ioctl pointer: c0204560. mmap pointer: c0203f6c
> RNG Driver: Loading
> SEC: mxc_sec_mod_init() called
> logger: created 64K log 'log_main'
> logger: created 64K log 'log_events'
> logger: created 64K log 'log_radio'
> Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20
> 19:16:42 200
> 7 UTC).
> Control ALSA component registered
> ALSA device list:
> #0: MXC Freescale with PMIC
> oprofile: using arm/armv6
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketr...@linux.intel.com>
> mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
> Real TIme clock Driver v1.0
> Power Management for Freescale MX31
> VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev
> 2
> MXC Backlight Device mxc_ipu_bl.0 Initialized.
> input: mxc_ts as /class/input/input1
> mxc input touchscreen loaded
>
> mxc_rtc mxc_rtc.0: setting system clock to 1970-01-01 00:17:44 UTC
> (1064)
> Freeing init memory: 264K
>
> Warning: unable to open an initial console.
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
