Hey, Yes you can use GIT behind a proxy/firewall... get the IT support guys to open up the port 9418 and follow these steps in, https://omapzoom.org/gf/project/omapandroid/wiki/?pagename=Git+Firewall
regards, Pavan 2009/3/17 abhri <abhri.da...@gmail.com> > > Couple of questions > This is what i did upto now > i downloaded linux-2[1].6.25-android-1.0_r1.tar.gz > i applied the patch patch-2.6.25-omap1.bz2 for omap related changes. > > I changed the cross compiler to ARM-EABI in Makefile and compiled > successfully.for OMAP3EVM > I added ANDROID configuration as explained in the link > > If i Understand correctly now I need to download source and apply th > TLS patch as explained in the link. > > The problem is work behind a firewall, i can't use git. > Is there any other way to get the source.? > AM I in the right direction? > Thanks > Abhri > On Mar 5, 1:56 pm, Android Zaurus <androidzau...@yahoo.co.jp> wrote: > > Hi, > > > > Recently I ported Android to OMAP3EVM. I know I'd better write tips on > > my blog, but I'm kind busy for now. Followings are basic tips how I > > ported. > > > > 1) Kernelhttp:// > git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a... > > > > 2) Android Patch > > diff -urN vanilla-2.6.27/ cupcake/kernel/ > android.patch > > > > lowmemkiller.c needs to be patched manually. > > - rem = global_page_state(NR_ACTIVE) + global_page_state > > (NR_INACTIVE); > > + rem = global_lru_pages(); > > > > 3) TLS > > Apply TLS patches to both bionic and gl_wrapper. > http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > > > > 4) red tint > > If your LCD gets red tint issue, apply following patch. > > http://www.mail-archive.com/linux-o...@vger.kernel.org/msg06389.html > > > > 5) touchscreen > > Somehow touchscreen was rotated 180 degree. I modified the code like > > this; > > input_report_abs(input, ABS_X, pdata->x_max - x + pdata->x_min); > > input_report_abs(input, ABS_Y, pdata->y_max - y + pdata->y_min); > > > > 6) Userland > > Before running Android system, I installed Debian ARM to USB stick > > by using debootstrap. Thanks to Debian team, it works beautifully. > > My Android on OMAP3 is booted by chroot-ing from Debian. > > > > Good luck, > > > > On 3ζ5ζ₯, εεΎ5:11, abhri <abhri.da...@gmail.com> wrote: > > > > > > > > > hi all > > > Thanks for the info. Ill try the same and get back to you > > > > > On Mar 5, 12:55 pm, Nimit Manglick <nimitandr...@gmail.com> wrote: > > > > > > Hi, > > > > > > Ya i did porting on3530EVM. So to get started there are lot of > documents > > > > available on net. > > > > > > 1. Basically what you need a working kernel with that board support. > > > > > > 2. On top of it you need to apply a android patch. > > > > > > 3. You need to build a RFS , for that follow this link :- > > > > > > > http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board > > > > > > Regards > > > > Nimit > > > > > > On Thu, Mar 5, 2009 at 1:05 PM, vishal bhoj <vishalb...@gmail.com> > wrote: > > > > > use the kernel on embinux site. modify the config file enable > android stuff > > > > > in it. this is enough to get it running u myt run into touchscreen > driver > > > > > problem. > > > > > > > On Thu, Mar 5, 2009 at 2:06 AM, pavan savoy <pavan.sa...@gmail.com> > wrote: > > > > > > >> I remember Nimit working on OMAP3530 EVM. > > > > > > >> On Thu, Mar 5, 2009 at 12:31 PM, abhri <abhri.da...@gmail.com> > wrote: > > > > > > >>> Hi, > > > > >>> I am new to Android porting. I have to port ANdroid toOMAP3530EVM > > > > >>> board. Can someone give me some pointers on where to start. Also, > a > > > > >>> step by step approach would indeed be helpful. > > > > > > >>> Thanks > > > > >>> Abhri > > > > > > > -- > > > > > with regards vishal- Hide quoted text - > > > > > > - Show quoted text -- Hide quoted text - > > > > - Show quoted text - > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---