I found out that there is no mountd under /system/bin. It must be that mountd is not copied into system.img. Which code should I look at to ensure that system.img contains mountd?
Thanks, Brian On Mar 29, 6:26 pm, Yi Sun <beyo...@gmail.com> wrote: > Here is the part of the init.rc that I think is important for you to verify. > Just make sure you have all of them enabled. You init.rc should be in > /vendor/asus/eee_701/ > > # adbd is controlled by the persist.service.adb.enable system property > service adbd /sbin/adbd > disabled > > on property:persist.service.adb.enable=1 > start adbd > > on property:persist.service.adb.enable=0 > stop adbd > > service servicemanager /system/bin/servicemanager > user system > critical > onrestart restart zygote > onrestart restart media > > service mountd /system/bin/mountd > socket mountd stream 0660 root mount > > service zygote /system/bin/app_process -Xzygote /system/bin --zygote > --start-system-server > socket zygote stream 666 > onrestart write /sys/android_power/request_state wake > > service media /system/bin/mediaserver > user media > group system audio camera graphics inet net_bt net_bt_admin > > service installd /system/bin/installd > socket installd stream 600 system system > > On Sun, Mar 29, 2009 at 4:55 PM, Brian <bgc...@gmail.com> wrote: > > > Thanks, Yi. > > > Now I can use adb to browse the android vm directories. Also, I > > installed busybox. :) > > > I noticed that mine does not show either mountd or zygote. Maybe > > init.rc is different? > > Could you kindly post your init.rc so that I can do further debugging? > > > Thanks, > > Brian > > > On Mar 29, 4:07 pm, Yi Sun <beyo...@gmail.com> wrote: > > > Hi Brain, > > > I just saw that I have replied your e-mail with such a bad English :-). > > In > > > order to run adbd, you need to either set persist.service.adb.enable=1 or > > > run it directly in the init.rc. > > > > I don't have any issue with init.rc while I tried the android on my Eee > > PC. > > > The problem I had is with the i915 DRM/FB driver. After changed to use > > right > > > module, I was be able to run Android. > > > Yi > > > > On Sun, Mar 29, 2009 at 3:01 PM, Brian <bgc...@gmail.com> wrote: > > > > > Thanks, Yi ! > > > > > I think init.rc is not correctly executed. It probably exits before it > > > > starts adb. > > > > I manually started adbd, and connected android using adb successfully. > > > > > What problems did you have in init.rc? > > > > > Thanks, > > > > Brian > > > > > On Mar 29, 2:21 pm, Yi Sun <beyo...@gmail.com> wrote: > > > > > In your ps, I did not see adbd. If should be abled if > > > > > persist.service.adb.enable=1 > > > > > Yi > > > > > > On Sun, Mar 29, 2009 at 8:26 AM, Brian <bgc...@gmail.com> wrote: > > > > > > > Thanks, Chen. > > > > > > > On Mar 28, 10:40 pm, Chen Yang <sunsety...@gmail.com> wrote: > > > > > > > Brian: > > > > > > > I cannot see the clear problem from your description. The > > segfault > > > > > > > issue seems to be common where the there is no framebuffer > > devices > > > > > > > activated. > > > > > > > For connection over adb, you may need to enabled the pcnet32 > > > > driver > > > > > > > in the kernel. > > > > > > > My pcnet32 driver is working. I can ping from the vm and ping the > > vm > > > > > > as well. > > > > > > I tried ADB_HOST, but it did not work. I think this is because adbd > > is > > > > > > not running on android. > > > > > > Is there an easy way to run it manually? When I just type adbd, it > > > > > > does not return to the console > > > > > > (I'm doing all of these by keep pressing alt+f1 whenever there is a > > > > > > black screen.) > > > > > > > > One more question, when enabled vga=788 option, have you > > waited > > > > > > > some time to see the effect? The screen may become black for a > > short > > > > > > > time, during that time, the kernel is doing some initialization, > > so > > > > > > > Yes. It goes to the similar stage where I get without vga=788. > > > > > > But with vga=788, even alt+f1 does not work. I can't even see a > > > > > > console briefly by pressing alt+f1. > > > > > > > I did ps. > > > > > > (I may miss some processes before ata/0 due to screen size) > > > > > > ata/0 > > > > > > ata_aux > > > > > > ksuspend_usbd > > > > > > khubd > > > > > > kseriod > > > > > > kmmcd > > > > > > btaddconn > > > > > > btdelconn > > > > > > pdflush > > > > > > pdflush > > > > > > kswapd0 > > > > > > aio/0 > > > > > > scsi_eh_0 > > > > > > scsi_eh_1 > > > > > > kondemand/0 > > > > > > krfconmd > > > > > > kjournald > > > > > > kjournald > > > > > > kjournald > > > > > > /system/bin/sh > > > > > > /system/bin/servicemanager > > > > > > /system/bin/mediaserver > > > > > > /system/bin/installd > > > > > > > Are you getting a similar list of processes? > > > > > > Is this missing important processes? > > > > > > > Have you tried to build one with the latest repository? I'm > > wondering > > > > > > if this is because of some changes in the repository. > > > > > > If you can post the installer.img you created for vmware, I'd like > > to > > > > > > try it out. > > > > > > > Thanks a lot! > > > > > > - Brian > > > > > > > > looks like no response. > > > > > > > -- > > > > > > > Chen > > > > > > > > On Sun, Mar 29, 2009 at 5:44 AM, Brian <bgc...@gmail.com> wrote: > > > > > > > > > Hi Chen, > > > > > > > > > When I added vga=788 in the cmdline in booting it, the screen > > > > totally > > > > > > > > freezes. Even alt + f1 does not display any. > > > > > > > > I booted the kernel with vga=788 option. In that case, I have > > the > > > > > > > > following in /proc/cmdline. > > > > > > > > console=ttyS1,115200n8 console=tty0 > > androidboot.hardware=eee_701 > > > > > > > > > I tried to check /proc/devices. But for that I need to install > > > > > > > > busybox. I don't know how to do it without installing busybox. > > > > > > > > Unfortunately adb does not work (I tried ADBHOST, but I got > > error: > > > > > > > > device not found), although > > > > > > > > the android vm has network connection in a bridged mode. > > > > > > > > > I am sure I turned on VESA VGA and Framebuffer Console support > > when > > > > I > > > > > > > > compiled bzImage. > > > > > > > > > dmesg output keeps printing out the following. > > > > > > > > <6> [timestamp] SurfaceFlinger[2956]: segfault at 38 ip > > 80111049 sp > > > > > > > > b5b56fec error 4 in libc.so [80100000+4b000] > > > > > > > > > Thanks for your help. > > > > > > > > Brian > > > > > > > > > On Mar 27, 5:11 am, Chen Yang <sunsety...@gmail.com> wrote: > > > > > > > >> hi,Brian: > > > > > > > >> Sorry for late response on this thread. > > > > > > > >> Would you like to check the whether the kernel has the VESA > > > > > > > >> support? Would you like to provide the result with: > > > > > > > >> #cat /proc/cmdline > > > > > > > >> and > > > > > > > >> #cat /proc/devices > > > > > > > >> see whether fb is listed. > > > > > > > >> -- > > > > > > > >> Chen > > > > > > > > >> On Fri, Mar 27, 2009 at 1:46 PM,Brian<bgc...@gmail.com> > > wrote: > > > > > > > >> > Hi, > > > > > > > > >> > I did all the steps following Chen's instructions. I am > > still > > > > having > > > > > > a > > > > > > > >> > problem. I have tried vmware workstation and fusion. > > > > > > > >> > In the vmware workstation, I got a blank screen after > > booting. > > > > > > > >> > When I press alt + f1, I can see the following messages. > > > > > > > > >> > [time] init : cannot find '/system/bin/mountd', disabling > > > > 'mountd' > > > > > > > >> > sh : can't access tty: job control turned off > > > > > > > >> > [time] warning: 'app_process' uses 32-bit capabilities > > (legacy > > > > > > support > > > > > > > >> > in use) > > > > > > > > >> > How can I fix it? It's hard to pinpoint what to do. > > > > > > > > >> > Thanks, > > > > > > > >> >Brian > > > > > > > > >> > On Dec 28 2008, 1:40 am, "Chen Yang" <sunsety...@gmail.com> > > > > wrote: > > > > > > > >> >> At hand, i only have VMware workstation, and I have > > verified > > > > the > > > > > > steps, hope > > > > > > > >> >> it helps. > > > > > > > >> >> I assume that you have parepared the installer.img from > > Lim's > > > > > > description: > > > > > > > > >> >> 1. create the vmware disk file based on the installer.img > > > > > > > >> >> you can use sfdisk -l installer.img to get the C/H/S > > > > information > > > > > > about it, > > > > > > > >> >> although it reports issues, it won't do harm, at least from > > my > > > > > > observation. > > > > > > > >> >> And get our interested line: > > > > > > > >> >> ... > > > > > > > >> >> for C/H/S=*/1/0 (instead of 49/255/63). > > > > > > > >> >> ... > > > > > > > > >> >> Also, you may need to change the following entries: the > > extent > > > > > > description > > > > > > > >> >> part, to the real block size of the image, basically, it's > > size > > > > of > > > > > > > >> >> installer.img/512. > > > > > > > > >> >> Cut the following lines to one file with the installer.img > > as > > > > > > > >> >> installer.vmdk, and copy the installer.img together with > > this > > > > file > > > > > > in the > > > > > > > >> >> same directory. > > > > > > > >> >> --- > > > > > > > >> >> # Disk DescriptorFile > > > > > > > >> >> version=1 > > > > > > > >> >> CID=b01deebc > > > > > > > >> >> parentCID=ffffffff > > > > > > > >> >> createType="monolithicFlat" > > > > > > > >> >> # Extent description > > > > > > > >> >> RW 794622 FLAT "installer.img" 0 > > > > > > > >> >> # The Disk Data Base > > > > > > > >> >> #DDB > > > > > > > >> >> ddb.virtualHWVersion = "4" > > > > > > > >> >> ddb.geometry.cylinders = "49" > > > > > > > >> >> ddb.geometry.heads = "255" > > > > > > > >> >> ddb.geometry.sectors = "63" > > > > > > > >> >> ddb.adapterType = "ide" > > > > > > > >> >> ddb.toolsVersion = "0" > > > > > > > >> >> -- > > > > > > > > >> >> 2.create a new vmware target environment as linux 2.6 > > series, > > > > and > > > > > > create one > > > > > > > >> >> primary hdd with IDE at least 1.8GB(maybe a little less is > > > > > > possible, i > > > > > > > >> >> haven't remebered the precise size, and I haven't tried > > SCSI > > > > yet, > > > > > > but may be > > > > > > > >> >> also possible). Add the installer.vmdk as one extra hard > > disk > > > > to > > > > > > the virtual > > ... > > read more » --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---