Hi Yi
environment:
VirtualBox : Sun xVirtualBox 2.1.4
Host : Windows XP, guest: Ububtu8.10
I did android building process on guest environment(Ubuntu).
I downloaded above patches from
http://code.google.com/p/patch-hosting-for-android-x86-support/
(boot_able_img.patch,
alarm.patch,
frameworks.patch,
e2fsprogs.patch )
And I applied boot_able_img.patch, alarm.patch, e2fsprogs.patch.
And I could accept installed.img successfully.
And I converted *.img to *.vdi on DOS cmd using VBoxManage.exe.
( VBoxManage.exe convertfromraw -format VDI c:\installer.img c:
\installer.vdi )
I
finally I can see this result.
....
[time..] init: /init.rc: 89: invalid option 'enabled'
ANDROID [time..] EXT2-fs warning: mounting
unchecked fs, running e2fsck recommended
[time..] EXT-fs warning: mounting unchecked fs, running e2fsck
recommended
[time..] atl2: disagrees about version of symbol struct_module
[time..] softcursor: disagrees about version of symbol struct_module
[time..] bitblit: disagrees about version of symbol struct_module
[time..] font: disagrees about version of symbol struct_module
...
[time..] drm: disagrees about version of symbol struct_module
[time..] i915: disagrees about version of symbol struct_module
[time..] fbcon: disagrees about version of symbol struct_module
[time..] attempt to access beyond end of device
[time..] sda: rw=0, want=1022448, limit=1021432
[time..] attempt to access beyond end of device
[time..] sda: rw=0, want=1022448, limit=1021432
[time..] EXT2-fs error (device sda8): ext2_readdir:bad page in #505
[time..] Remounting filesystem read-only
sh: can't access tty: job control turned off
#[time ..] eth0: link up, 100Mbps, full-duplex
_ <== if enter
#
If I modified /vendor/asus/eee_701/init.rc not to include modules
(atl2.ko, softcursor.ko ... etc),
I did see
...
some logs
ANDROID
sh: can't access tty: job control turned off
[time..] eth0: link up, 100Mbps, full-duplex
What can I do to fix this problem? Any suggestion?
Thanks
shlee
On 4월10일, 오전3시43분, Yi Sun <beyo...@gmail.com> wrote:
> THen you don't need to worry about i915 at all. forget about it, just
> make sure you have config the vesa fb correctly as Chen said. And make
> sure you have passed in the correct cmdline.
>
>
>
> On Thu, 2009-04-09 at 11:36 -0700, shleeforandroid wrote:
> > hi Yi.
> > I have no eeePC.
> > so, I am testing on just VM.
>
> > On Apr 10, 3:24 am, Yi Sun <beyo...@gmail.com> wrote:
> > > Are you going to run it on the real eee PC target or just a VM?
>
> > > On Thu, 2009-04-09 at 11:11 -0700, shleeforandroid wrote:
> > > > Hi Brian.Yi
>
> > > > thaks for your early reply.
> > > > I've struggled with android 2.6.25 kernel building with modifying some
> > > > config option. T.T;;
>
> > > > I did like this to make latest drm module.
> > > > aa$ git clone
> > > > git://anongit.freedesktop.org/git/mesa/drm
> > > > aa$ cd drm/linux-core && make
> > > > aa/drm/linux-core$ ls *.ko
> > > > drm.ko mach64.ko nouveau.ko radeon.ko sis.ko via.ko
> > > > i810.ko mga.ko r128.ko savage.ko tdfx.ko xgi.ko
>
> > > > aa/drm/linux-core$ cp drm.ko ~/mydroid/vendor/asus/eee_701/modules/
> > > > drm.ko
> > > > aa/drm/linux-core$ cd ~/mydroid
> > > > mydroid$ TARGET_ARCH=x86 TARGET_PRODUCT=eee_701
> > > > DISABLE_DEXPREOPT=true make -j2 installer_img
>
> > > > and I will modify init.rc.
> > > > <out/~/eee_701dir>$ vi rootimg/init.rc
> > > > ### Load some modules
> > > > # insmod /lib/modules/atl2.ko
> > > > # insmod /lib/modules/softcursor.ko
> > > > # insmod /lib/modules/bitblit.ko
> > > > # insmod /lib/modules/font.ko
> > > > # insmod /lib/modules/cfbimgblt.ko
> > > > # insmod /lib/modules/cfbfillrect.ko
> > > > # insmod /lib/modules/cfbcopyarea.ko
> > > > insmod /lib/modules/drm.ko
> > > > # insmod /lib/modules/i915.ko modeset=1
> > > > insmod /lib/modules/fbcon.ko
>
> > > > and will follow the Chen's method.
> > > > I just remove i915 module like above.
>
> > > > Is this step ok?
> > > > I'm waiting the result of this steps.
> > > > How to fix fbcon problem?
>
> > > > thanks
> > > > shlee.
>
> > > > On Apr 10, 1:03 am, Brian <bgc...@gmail.com> wrote:
> > > > > Hi Shlee,
>
> > > > > In the end, I used 2.6.27. But 2.6.25 should also work.
> > > > > The way I addressed the fb problem is to build and use the latest
> > > > > intel drm driver modules.
> > > > > Afterwards, you need to modify init.rc and some service files as
> > > > > posted in this mailing list.
>
> > > > > -Brian
>
> > > > > On Apr 9, 7:58 am, shleeforandroid <shlee3...@gmail.com> wrote:
>
> > > > > > hi brian
> > > > > > Congratulate your work !!!!
>
> > > > > > I've just reached to some part of your work that is posed " On Mar
> > > > > > 30,
> > > > > > 8:49 am, Brian <bgc...@gmail.com>" below.
>
> > > > > > > > >> >> >Thanks, Jerry!
> > > > > > > > >> >> > I'm using kernel 2.6.27, and the modules have version
> > > > > > > > >> >> > 2.6.25 as you
> > > > > > > > >> >> > can see below.
> > > > > > > > >> >> > There are inconsistencies in the cupcake branch.
> > > > > > > > >> >> > I will either get kernel 2.6.25 or try to compile
> > > > > > > > >> >> > 2.6.27 modules.
> > > > > > > > >> >> > Thanks,Brian
> > > > > > > > >> >> > ./kernel/include/config/kernel.release:2.6.27-00120-g453dc2b-dirty
> > > > > > > > >> >> > $ modinfo
> > > > > > > > >> >> > ./out/target/product/eee_701/rootimg/lib/modules/i915.ko
> > > > > > > > >> >> > filename:
> > > > > > > > >> >> > ./out/target/product/eee_701/rootimg/lib/modules/
> > > > > > > > >> >> > i915.ko
> > > > > > > > >> >> > license: GPL and additional rights
> > > > > > > > >> >> > description: Intel Graphics
> > > > > > > > >> >> > author: Tungsten Graphics, Inc.
> > > > > > > > >> >> > license: GPL
> > > > > > > > >> >> > srcversion: 73F81EDC4CAE593AA695C49
> > > > > > > > >> >> > depends: drm,cfbfillrect,cfbimgblt,cfbcopyarea
> > > > > > > > >> >> > vermagic: 2.6.25-00101-gb6922fa SMP preempt
> > > > > > > > >> >> > mod_unload PENTIUMM
> > > > > > > > >> >> > parm: modeset:int
> > > > > > > > >> >> > parm: fbpercrtc:int
> > > > > > > > >> >> > parm: i915_rightof:int
>
> > > > > > I followed your steps, Chen's and Lim's method.
> > > > > > I can see "ANDROID" message on my VirtualBox and some errors.
>
> > > > > > !!! **
> > > > > > I also want to build android kernel 2.6.25. but i can't this kernel
> > > > > > version .
> > > > > > Would you let me know the way?
> > > > > > I want to know how to accept 2.6.25 kernel version.
>
> > > > > > Thanks
> > > > > > shlee.
>
> > > > > > On 4월2일, 오후1시43분, Brian <bgc...@gmail.com> wrote:
>
> > > > > > > Hi Chen,
>
> > > > > > > Finally, Android booted successfully !
> > > > > > > Thanks for all the help.
> > > > > > > I need to connect to it using adb, but I don't know its ip
> > > > > > > address.
> > > > > > > In my phone, I'm using an terminal emulator I downloaded from the
> > > > > > > market...
>
> > > > > > > Thanks,
> > > > > > > Brian
>
> > > > > > > On Apr 1, 9:13 pm, Chen Yang <sunsety...@gmail.com> wrote:
>
> > > > > > > > hi Brian:
> > > > > > > > You may need to modify the framework/base/preloaded-classes to
> > > > > > > > remove those non existing classes.
> > > > > > > > And you can reference Androidphan's reply in this thread.
> > > > > > > > You may encounter the NFE and NPE, reference
> > > > > > > > this:http://groups.google.com/group/android-porting/msg/64eb5a0158e6b815
> > > > > > > > and Androdphan's
> > > > > > > > thread:http://groups.google.com/group/android-porting/msg/97bd8c7c44a189ec
> > > > > > > > --
> > > > > > > > Chen
>
> > > > > > > > On Thu, Apr 2, 2009 at 12:05 PM, Brian <bgc...@gmail.com> wrote:
>
> > > > > > > > > The system is trying to run zygote, but I got the following
> > > > > > > > > error.
> > > > > > > > > I'm attaching my logcat output.
>
> > > > > > > > > E/Zygote ( 2126): Zygote died with exception
> > > > > > > > > E/Zygote ( 2126): java.lang.IllegalStateException: Missing
> > > > > > > > > class(es)
> > > > > > > > > for preloading, update preloaded-classes
> > > > > > > > > [com.android.internal.policy.impl.PhoneLayoutInflater
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow$1
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow$ContextMenuCallback
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow$DecorView
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow$PanelFeatureState
> > > > > > > > > com.android.internal.policy.impl.PhoneWindow$PanelFeatureState
> > > > > > > > > $SavedState com.android.internal.policy.impl.PhoneWindow
> > > > > > > > > $PanelFeatureState$SavedState$1]
> > > > > > > > > E/Zygote ( 2126): at
> > > > > > > > > com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:299)
> > > > > > > > > E/Zygote ( 2126): at
> > > > > > > > > com.android.internal.os.ZygoteInit.main
> > > > > > > > > (ZygoteInit.java:512)
> > > > > > > > > E/Zygote ( 2126): at
> > > > > > > > > dalvik.system.NativeStart.main(Native
> > > > > > > > > Method)
> > > > > > > > > D/AndroidRuntime( 2126): Shutting down VM
> > > > > > > > > W/dalvikvm( 2126): threadid=3: thread exiting with uncaught
> > > > > > > > > exception
> > > > > > > > > (group=0xb00dfdf8)
> > > > > > > > > D/dalvikvm( 2126): DestroyJavaVM waiting for non-daemon
> > > > > > > > > threads to
> > > > > > > > > exit
> > > > > > > > > D/dalvikvm( 2126): DestroyJavaVM shutting VM down
> > > > > > > > > D/dalvikvm( 2126): VM cleaning up
> > > > > > > > > D/dalvikvm( 2126): LinearAlloc 0x0 used 2087468 of 4194304
> > > > > > > > > (49%)
> > > > > > > > > D/skia ( 2126): purging 6K from font cache [1 entries]
>
> > > > > > > > > Any suggestion?
>
> > > > > > > > > Thanks,
> > > > > > > > > Brian
> > > > > > > > > On Apr 1, 5:13 pm, Chen Yang <sunsety...@gmail.com> wrote:
> > > > > > > > >> Cool. It seems that you don't have the essential process:
> > > > > > > > >> zygote. You
> > > > > > > > >> can check the logcat messages to see what was happenning.
> > > > > > > > >> Thanks.
> > > > > > > > >> --
> > > > > > > > >> Chen
>
> > > > > > > > >> On Thu, Apr 2, 2009 at 8:09 AM, Brian <bgc...@gmail.com>
> > > > > > > > >> wrote:
>
> > > > > > > > >> > Hi all,
>
> > > > > > > > >> > I finally managed to boot android x86 with vga=788 option
> > > > > > > > >> > without
> > > > > > > > >> > black screen in vmware.
> > > > > > > > >> > Thanks for all the help!
>
> > > > > > > > >> > I'm trying to go to the next step.
> > > > > > > > >> > Even with vga=788 option, I don't see GUI. Why? Instead, I
> > > > > > > > >> > get a shell
> > > > > > > > >> > prompt.
> > > > > > > > >> > Here's the list of system processes stored under
> > > > > > > > >> > /system/bin/.
> > > > > > > > >> > /system/bin/sh
> > > > > > > > >> > /system/bin/servicemanager
> > > > > > > > >> > /system/bin/mountd
> > > > > > > > >> > /system/bin/mediaserver
> > > > > > > > >> > /system/bin/installd
>
> > > > > > > > >> > I tried to do "ADBHOST=<ip> adb install app.apk", but I
> > > > > > > > >> > got the
> > > > > > > > >> > following error "Error: Could not access the Package
> > > > > > > > >> > Manager. Is the
> > > > > > > > >> > system running?".
>
> > > > > > > > >> > I'd like to install this application with GUI and to start
> > > > > > > > >> > it. How can
> > > > > > > > >> > I do it?
>
> > > > > > > > >> > Thanks,
> > > > > > > > >> > Brian
>
> > > > > > > > >> > On Mar 30, 10:54 pm, Brian <bgc...@gmail.com> wrote:
> > > > > > > > >> >> Hi Chen,
>
> > > > > > > > >> >> I managed to compile kernel 2.6.25.
> > > > > > > > >> >> When I ran it without vga=788, I see a shell prompt.
> > > > > > > > >> >> The screen does not go to black one.
> > > > > > > > >> >> But I keep getting the following message.
> > > > > > > > >> >> [timestamp] android_power: wakeup (0->0) at ...
> > > > > > > > >> >> (Btw, how can I turn off this message?)
>
> > > > > > > > >> >> I still have a problem with vga=788.
> > > > > > > > >> >> This time I'm getting a kernel panic, which I'm attaching.
> > > > > > > > >> >> Has anyone seen this problem? What's a proper approach to
> > > > > > > > >> >> address this
> > > > > > > > >> >> problem?
>
> > > > > > > > >> >> Thanks,
> > > > > > > > >> >> Brian
>
> > > > > > > > >> >> Process netcfg (pid: 2031, ti=cf17c000 task=cf3001b0
> > > > > > > > >> >> task.ti=cf17c000)
>
> ...
>
> 추가 정보 »- 따온 텍스트 숨기기 -
>
> - 따온 텍스트 보기 -
--~--~---------~--~----~------------~-------~--~----~
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---
