Hi Cindy,

Its the problem in ur filesystem...

and I am not sure about ur booatargs as well....

Please use my bootargs which i mentioned earlier.. The bootargs u r using
that might be specific to beagle board I suppose.

Or else try to boot it via SD / MMC card.

Regards
NImit

2009/4/15 cindy_king_1024 <cindy_king_1...@126.com>

> Hi Nimit,
>
> I enter the command about nfs boot,it come with the same error,what about
> yours?have you seen such setences:
>
>
> <6>Waiting 2sec before mounting root device...
> Waiting 2sec before mounting root device...
> <5>Looking up port of RPC 100003/2 on 10.86.76.68
> Looking up port of RPC 100003/2 on 10.86.76.68
> <5>Looking up port of RPC 100005/1 on 10.86.76.68
> Looking up port of RPC 100005/1 on 10.86.76.68
> VFS: Mounted root (nfs filesystem).
> VFS: Mounted root (nfs filesystem).
> <6>Freeing init memory: 144K
> Freeing init memory: 144K
> <4>Warning: unable to open an initial console.
> Warning: unable to open an initial console.
> <0>Kernel panic - not syncing: Attempted to kill init!
> Kernel panic - not syncing: Attempted to kill init!
>
> the nfs bootargs:
> setenv console=ttyS0,115200n8 noinitrd rw root=/dev/nfs
> nfsroot=10.86.76.68:/home/Android_rfs ip=dhcp nolock,rsize=1024,wsize=1024
> rootdelay=2 video=omapfb:mode:640x...@50 init=/init mem=128M
>
> Kernel command line: 在2009-04-15 12:38:36,"Nimit Manglick" <
> nimitandr...@gmail.com> 写道:
>
> Hi Cindy,
>
> 1.what do you mean about cupcake branch?
>
> Cupcake is the new android branch which has just been merged to master
> branch.
> Means to say that it is the latest android code drop branch.
> So In that currently alsa (for audio support ) is breaking, but first of
> all ur basic android should boot.
>
> 2.Boot from nfs
>
> Try with the following nfs bootargs :-
>
> setenv bootargs mem=128M console=ttyS0,115200n8 noinitrd rw root=/dev/nfs
> nfsroot=<path to ur filesystem on ur host machine>
> ,nolock,wsize=1024,rsize=1024 ip=dhcp init=/init
>
> Please make sure you have run all the services like nfs-server etc on ur
> host machine
> and made a entry in ur /etc/exports
>
> Hope it helps.
>
> Regards
> Nimit
>
>
> 2009/4/14 cindy_king_1024 <cindy_king_1...@126.com>
>
>> Dear Nimit,
>> I'm glad to hear from you,as you discript:
>> 1.what do you mean about cupcake branch?
>>
>> 2.Boot from nfs ,the inviaronment variable was that:
>> setenv console=ttyS0,115200n8 ip=dhcp rw root=/dev/nfs
>> nfsroot=10.86.76.92:/home/jennifer/Android_rfs,nolock mem=88M
>> video=omapfb:mode:640x...@50 init=/init
>>
>> 3.Without the patch to the nfs filesystem,it aborted with the following
>> sentence:
>>
>> IP-Config: Got DHCP answer from 0.0.0.0, IP-Config: Got DHCP answer from
>> 0.0.0.0, my address is 10.8
>> 6.76.115
>> my address is 10.86.76.115
>> IP-Config: Complete:IP-Config: Complete:
>>      device=eth0
>>      device=eth0, addr=10.86.76.115, addr=10.86.76.115,
>> mask=255.255.255.0, mask=255.255.255.0, gw=1
>> 0.86.76.249, gw=10.86.76.249,
>>      host=10.86.76.115, domain=, nis-domain=(none),
>>      host=10.86.76.115, domain=, nis-domain=(none),
>>      bootserver=0.0.0.0,
>>      bootserver=0.0.0.0, rootserver=10.86.76.92, rootserver=10.86.76.92,
>> rootpath=, rootpath=
>>
>> <5>Looking up port of RPC 100003/2 on 10.86.76.92
>> Looking up port of RPC 100003/2 on 10.86.76.92
>> <5>Looking up port of RPC 100005/1 on 10.86.76.92
>> Looking up port of RPC 100005/1 on 10.86.76.92
>>
>> VFS: Mounted root (nfs filesystem).
>> VFS: Mounted root (nfs filesystem).
>> <6>Freeing init memory: 144K
>> Freeing init memory: 144K
>> <4>Warning: unable to open an initial console.
>> Warning: unable to open an initial console.
>> <0>Kernel panic - not syncing: Attempted to kill init!
>> Kernel panic - not syncing: Attempted to kill init!
>>
>>
>>
>>
>>
>>
>>
>>
>> 在2009-04-14 17:28:50,"Nimit Manglick" <nimitandr...@gmail.com> 写道:
>>
>> Hi Cindy,
>>
>> Ya you can follow the below link. tell me at what step you are stucked
>> now.
>>
>> Anywaz basic steps for porting are :-
>>
>> 1. Make ur kernel (Follow any link available on net ) This link will give
>> you teh kernel for beagle board. So Dont check out this kernel.
>>
>> 2. Build your android (Dont apply the patches as mentioned if you are
>> going to work on cupcake branch)
>>
>> 3. make ur filesystem.
>>
>> 4. With your own set of booatargs for EVM.. run android.
>>
>> Hope this helps. If you are stucking somewhere let me know. I will try to
>> help you out.
>>
>> Regards
>> Nimit
>>
>> 2009/4/13 cindy_king_1024 <cindy_king_1...@126.com>
>>
>>>
>>> Hi,Nimit
>>> Can you  give me some detailed steps about android porting.
>>> I have follow the steps in the following link:
>>>  http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board
>>> but it comes with this :
>>>   <6>eth0: link down
>>> eth0: link down
>>> <5>Sending DHCP requests .Sending DHCP requests .<6>eth0: link up,
>>> 100Mbps, full-duplex, lpa 0x05E1
>>> <6>eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
>>> ..,, OK
>>>  OK
>>> IP-Config: Got DHCP answer from 0.0.0.0, IP-Config: Got DHCP answer from
>>> 0.0.0.0, my address is 192.
>>> 168.1.104
>>> my address is 192.168.1.104
>>> IP-Config: Complete:IP-Config: Complete:
>>>      device=eth0
>>>      device=eth0, addr=192.168.1.104, addr=192.168.1.104,
>>> mask=255.255.255.0, mask=255.255.255.0, gw
>>> =192.168.1.1, gw=192.168.1.1,
>>>      host=192.168.1.104, domain=domain, nis-domain=(none),
>>>      host=192.168.1.104, domain=domain, nis-domain=(none),
>>>      bootserver=0.0.0.0,
>>>      bootserver=0.0.0.0, rootserver=192.168.1.105,
>>> rootserver=192.168.1.105, rootpath=, rootpath=
>>> <6>Waiting 2sec before mounting root device...
>>> Waiting 2sec before mounting root device...
>>> <5>Looking up port of RPC 100003/2 on 192.168.1.105
>>> Looking up port of RPC 100003/2 on 192.168.1.105
>>> <5>Looking up port of RPC 100005/1 on 192.168.1.105
>>> Looking up port of RPC 100005/1 on 192.168.1.105
>>> VFS: Mounted root (nfs filesystem).
>>> VFS: Mounted root (nfs filesystem).
>>> <6>Freeing init memory: 144K
>>> Freeing init memory: 144K
>>> <4>Warning: unable to open an initial console.
>>> Warning: unable to open an initial console.
>>> <3>init: cannot open '/initlogo.rle'
>>> init: cannot open '/initlogo.rle'
>>> <3>init: Unable to open persistent property directory /data/property
>>> errno: 2
>>> init: Unable to open persistent property directory /data/property errno:
>>> 2
>>> <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound'
>>> init: cannot find '/system/bin/playmp3', disabling 'bootsound'
>>> sh: can't access tty; job control turned off
>>> # <6>warning: `rild' uses 32-bit capabilities (legacy support in use)
>>> warning: `rild' uses 32-bit capabilities (legacy support in use)
>>> <6>request_suspend_state: wakeup (3->0) at 23607482910 (1970-01-01
>>> 00:00:23.607482910 UTC)
>>> request_suspend_state: wakeup (3->0) at 23607482910 (1970-01-01
>>> 00:00:23.607482910 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 24186004638 (1970-01-01
>>> 00:00:24.186004638 UTC)
>>> request_suspend_state: wakeup (0->0) at 24186004638 (1970-01-01
>>> 00:00:24.186004638 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 29410034179 (1970-01-01
>>> 00:00:29.410034179 UTC)
>>> request_suspend_state: wakeup (0->0) at 29410034179 (1970-01-01
>>> 00:00:29.410034179 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 35350250244 (1970-01-01
>>> 00:00:35.350219726 UTC)
>>> request_suspend_state: wakeup (0->0) at 35350250244 (1970-01-01
>>> 00:00:35.350219726 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 40411346435 (1970-01-01
>>> 00:00:40.411315917 UTC)
>>> request_suspend_state: wakeup (0->0) at 40411346435 (1970-01-01
>>> 00:00:40.411315917 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 45559783935 (1970-01-01
>>> 00:00:45.559783935 UTC)
>>> request_suspend_state: wakeup (0->0) at 45559783935 (1970-01-01
>>> 00:00:45.559783935 UTC)
>>> <6>request_suspend_state: wakeup (0->0) at 50434753417 (1970-01-01
>>> 00:00:50.434722900 UTC)
>>> request_suspend_state: wakeup (0->0) at 50434753417 (1970-01-01
>>> 00:00:50.434722900 UTC)
>>>
>>>
>>>   Thanks
>>>
>>>
>>> ------------------------------
>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/>
>>>
>>> ------------------------------
>>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/>
>>>
>>
>>
>>
>> ------------------------------
>> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com/>
>
>
>
>
> ------------------------------
> 网易邮箱,中国第一大电子邮件服务商 <http://email.163.com>

--~--~---------~--~----~------------~-------~--~----~
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
-~----------~----~----~----~------~----~------~--~---

Reply via email to