Thanks ,the following is the information after input the logcat commad,can you give me some advices I/DEBUG ( 1531): debuggerd: Aug 11 2009 18:45:02 E/mountd ( 1530): could not read initial mass storage state D/AndroidRuntime( 1533): D/AndroidRuntime( 1533): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<< D/AndroidRuntime( 1533): CheckJNI is ON I/ ( 1534): ServiceManager: 0xaab8 D/AudioHardwareALSA( 1534): mixer initialized. E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory I/AudioHardwareALSA( 1534): Initialized ALSA PLAYBACK device AndroidPlayback D/AudioHardwareALSA( 1534): Set PLAYBACK PCM format to S16_LE (Signed 16 bit Little Endian) D/AudioHardwareALSA( 1534): Using 2 channels for PLAYBACK. D/AudioHardwareALSA( 1534): Set PLAYBACK sample rate to 44100 HZ E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory E/ALSALib ( 1534): external/alsa-lib/src/control/setup.c:555:(add_elem) Cannot obtain info for CTL elem (MIXER,'PCM Volume',0,0,0): No such file or directory I/AudioHardwareALSA( 1534): Initialized ALSA PLAYBACK device AndroidPlayback D/AudioHardwareALSA( 1534): Set PLAYBACK PCM format to S16_LE (Signed 16 bit Little Endian) D/AudioHardwareALSA( 1534): Using 2 channels for PLAYBACK. D/AudioHardwareALSA( 1534): Set PLAYBACK sample rate to 44100 HZ I/AudioFlinger( 1534): AudioFlinger's main thread ready to run. I/CameraService( 1534): CameraService started: pid=1534 D/AndroidRuntime( 1533): --- registering native functions --- I/Zygote ( 1533): Preloading classes... D/dalvikvm( 1533): GC freed 746 objects / 41240 bytes in 12ms D/dalvikvm( 1533): GC freed 302 objects / 18568 bytes in 13ms D/dalvikvm( 1533): GC freed 309 objects / 18704 bytes in 15ms D/dalvikvm( 1533): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1533): Added shared lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1533): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1533): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1533): Trying to load lib /system/lib/libmedia_jni.so 0x0 D/dalvikvm( 1533): Shared lib '/system/lib/libmedia_jni.so' already loaded in same CL 0x0 D/dalvikvm( 1533): GC freed 3723 objects / 181192 bytes in 39ms D/dalvikvm( 1533): GC freed 259 objects / 19760 bytes in 33ms D/dalvikvm( 1533): GC freed 403 objects / 23760 bytes in 36ms
2009-08-13 JeefJiang Room 111,MingZhu Building Central South University ChangSha,HuNan P.R.C 发件人： vishal bhoj 发送时间： 2009-08-12 19:47:18 收件人： android-porting 抄送： 主题： [android-porting] Re: PORTING android to my smdk2440 board What is restricting you from using the shell . You can do one more thing, in the init.rc file launch the logcat command 2009/8/12 jeefjiang1983 <jeefjiang1...@163.com> thanks，butI can't input any command from the shell 2009-08-12 JeefJiang Room 111,MingZhu Building Central South University ChangSha,HuNan P.R.C 发件人： vishal bhoj 发送时间： 2009-08-12 19:23:13 收件人： android-porting 抄送： 主题： [android-porting] Re: PORTING android to my smdk2440 board Run logcat from the command prompt and paste the log here ,then we can help you 2009/8/12 jeefjiang1983 <jeefjiang1...@163.com> Hi, I PORTING android to my smdk2440 board according to http://wiki.openmoko.org/wiki/Android_porting， and I get the rootfs . I use a kernel image file which works well in a android rootfs I download from internet I mount my root file system from NFS,I can see the word android_ on LCD,but I can't see the ANDROID LOGO and the home screen. I can't use the shell. BOOT MESSAGES: Warning: unable to open an initial console. init: cannot open '/initlogo.rle' mmc0: card 0002 removed s3c2440-sdi s3c2440-sdi: powered down. s3c2440-sdi s3c2440-sdi: powered down. init: Unable to open persistent property directory /data/property errno: 2 init: cannot find '/system/bin/playmp3', disabling 'bootsound' init: cannot find '/system/bin/flash_image', disabling 'flash_recovery' sh: can't access tty; job control turned off # warning: `rild' uses 32-bit capabilities (legacy support in use) Thanks a lot for any hints or refernce. 2009-08-12 JeefJiang Room 111,MingZhu Building Central South University ChangSha,HuNan P.R.C -- with regards vishal -- with regards vishal --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
