Thanks, Tommy! So after I use "ATD*99***1#" dial command, I must send "ATH" to modem immediately?
2009/11/6 tommy tommy <hongjiuj...@gmail.com> > it is HW issue ,i guess your modem is under uncorrect state,i met similiar > problem a few days ago! > > please check you use AT port or PPP network dial port ,or you need "ATH" > after the first time exit to let modem RESET! > > > > 2009/11/6 Herman <hermanmao...@gmail.com> > >> Hi Eric, >> >> I have already chosen that. But it has the same result. >> >> Br, >> Herman >> >> 2009/11/5 Eric.Wang <ack0...@gmail.com> >> >> confirm your kernel menuconfig and try again >>> (*) PPP support for async serial ports >>> (*) PPP support for sync tty ports >>> >>> On Oct 21, 4:44 pm, Herman <hermanmao...@gmail.com> wrote: >>> > Hi all, >>> > >>> > I try to enable data connection function through external modem. It can >>> dial >>> > but data connection failed. PPPD can't work well. In PPP daemon, it >>> showed >>> > "Couldn't set tty to PPP discipline: m". I used 2.6.26 kernel before, >>> but >>> > now I used 2.6.29 kernel. In kernel configuration, I have already >>> enabled >>> > "Device Drivers->Network device support->PPP support". They have same >>> result >>> > in io control "TIOCSETD", it seems that it can't set to data >>> discipline. I >>> > use USB to Serial converter interface, below is log of radio and pppd. >>> Does >>> > anyone have suggestions? Thanks. >>> > >>> > D/AT ( 606): AT> ATD*99***1# >>> > D/AT ( 606): AT< ATD*99***1# >>> > D/AT ( 606): AT< CONNECT 115200 >>> > D/RILJ ( 662): [0041]< SETUP_DEFAULT_PDP {1, ppp0} >>> > D/GSM ( 662): [PdpConnection] PDP setup on cid = 1 >>> > I/pppd ( 806): Starting pppd >>> > E/pppd ( 807): Couldn't set tty to PPP discipline: m >>> > D/AT ( 606): AT< ~ }# !}!}!} }<}!}$}% }"}&} } } } }%}&} } } >>> }}'}"}(}"}#}$ # U~ >>> > >>> > D/AT ( 606): AT< OK >>> > I/pppd ( 812): pppd exited with 1 >>> > I/pppd ( 816): Starting pppd >>> > E/pppd ( 817): Couldn't set tty to PPP discipline: m >>> > I/pppd ( 820): pppd exited with 1 >>> > I/pppd ( 824): Starting pppd >>> > E/pppd ( 825): Couldn't set tty to PPP discipline: m >>> > I/pppd ( 828): pppd exited with 1 >>> > I/pppd ( 832): Starting pppd >>> > E/pppd ( 833): Couldn't set tty to PPP discipline: m >>> > I/pppd ( 836): pppd exited with 1 >>> > >>> > Best regards, >>> > Herman >>> >>> -- >>> unsubscribe: >>> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> >>> website: http://groups.google.com/group/android-porting >> >> >> -- >> unsubscribe: >> android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> >> website: http://groups.google.com/group/android-porting >> > > -- > unsubscribe: > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > website: http://groups.google.com/group/android-porting > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting