It seems from init.rc, data/misc/keystore directory is unable to be created.
any idea on the possible cause? On Tue, Dec 22, 2009 at 3:45 PM, linux newbie <linux.newbi...@gmail.com> wrote: > Thanks for your reply Anil. > > On issuing logcat command, I got the following response. > > # logcat > I/DEBUG ( 1141): debuggerd: Dec 14 2009 20:00:01 > I/vold ( 1140): Android Volume Daemon version 2.0 > E/vold ( 1140): Unable to open '/sys/class/mmc_host' (No such file > or directory) > E/vold ( 1140): Unable to open '/sys/class/switch' (No such file or > directory) > D/vold ( 1140): Bootstrapping complete > E/keystore( 1152): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1171): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1198): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1221): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1244): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1267): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1288): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1309): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1330): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1351): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1372): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1393): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1410): chdir: /data/misc/keystore: No such file or directory > E/keystore( 1431): chdir: /data/misc/keystore: No such file or directory > > On Tue, Dec 22, 2009 at 3:38 PM, Anil Sasidharan <anil...@gmail.com> wrote: >> Hi, >> >> Try running "logcat" command from the console and see the exact >> point of failure.. >> >> Warm Regards, >> Anil >> >> On Mon, Dec 21, 2009 at 4:44 PM, linux newbie <linux.newbi...@gmail.com> >> wrote: >>> >>> Hi, >>> >>> How to display the desktop sort of thing in my target? >>> I am getting the Android shell after booting but not desktop as we run >>> the emulator. >>> >>> Any suggestion? >>> >>> Thanks >>> >>> On Mon, Dec 21, 2009 at 2:05 PM, linux newbie <linux.newbi...@gmail.com> >>> wrote: >>> > Hi All, >>> > >>> > Thanks very much for your guidance. Android shell shows up :) >>> > >>> > Thanking You. >>> > >>> > On Sun, Dec 20, 2009 at 7:42 PM, Anil Sasidharan <anil...@gmail.com> >>> > wrote: >>> >> Hi, >>> >> >>> >> It seems "ASHMEM" is not enabled in kernel config (kernel log >>> >> does not >>> >> show the asmem init message). Please enable this module (Android Shared >>> >> Memory) and try. >>> >> >>> >> Warm Regards, >>> >> Anil >>> >> >>> >> On Fri, Dec 18, 2009 at 5:54 AM, linux newbie >>> >> <linux.newbi...@gmail.com> >>> >> wrote: >>> >>> >>> >>> Hi, >>> >>> >>> >>> STEP 1: >>> >>> I downloaded latest Andriod patched kernel (linux.2.6.27) using git >>> >>> clone. I applied our board specific patch on top of it and compiled it >>> >>> using toolchain arm-none-linux-gnueabi- >>> >>> >>> >>> I also compiled busybox with this same tool chain and booted the >>> >>> system and things were working fine as expected. >>> >>> >>> >>> STEP 2: >>> >>> Downloaded android source using git. compiled it for "generic" >>> >>> product. >>> >>> As my target has 128MB of SDRAM, I made a single root fs i.e copied >>> >>> out/target/product/generic/system to >>> >>> /out/target/product/generic/root_fs/system. >>> >>> >>> >>> commented mounting yaffs2 line for system and data in init.rc file. >>> >>> >>> >>> created ext2 file system image and downloaded it to my target. >>> >>> >>> >>> But I am not succesful in booting it. Please help me out to figure out >>> >>> the cause. Below is the log. >>> >>> >>> >>> Uncompressing >>> >>> >>> >>> Linux............................................................................................................... >>> >>> done, booting the kernel. >>> >>> Linux version 2.6.27-00127-gf92ea03-dirty (new...@ubuntu910vm) (gcc >>> >>> version 4.4.0 (GCC) ) #11 Thu Dec 17 15:44:03 PST 2009 >>> >>> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f >>> >>> Machine: RTS G5 >>> >>> Got g5 info >>> >>> 102292 C 1 3 >>> >>> 00:1A:EA:10:22:92 >>> >>> Memory policy: ECC disabled, Data cache writeback >>> >>> Memory clock: 99.53MHz (*27) >>> >>> Run Mode clock: 199.07MHz (*2) >>> >>> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>> >>> Msc0: 97787ff8 (f6000008) >>> >>> Msc1: 23c7f8c (f600000c) >>> >>> Msc2: 7ff07ff0 (f6000010) >>> >>> mdcnfg: 1cb, mdrefr: 1802f >>> >>> cccr: 141 >>> >>> CPLD Version: a02 >>> >>> CPU0: D VIVT undefined 5 cache >>> >>> CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >>> >>> CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets >>> >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>> >>> 32512 >>> >>> Kernel command line: root=/dev/ram0 rootfstype=ext2 >>> >>> console=ttyS1,115200 >>> >>> PID hash table entries: 512 (order: 9, 2048 bytes) >>> >>> Console: colour dummy device 80x30 >>> >>> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>> >>> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>> >>> Memory: 64MB 64MB = 128MB total >>> >>> Memory: 103564KB available (3184K code, 778K data, 112K init) >>> >>> SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, >>> >>> Nodes=1 >>> >>> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>> >>> Mount-cache hash table entries: 512 >>> >>> CPU: Testing write buffer coherency: ok >>> >>> khelper used greatest stack depth: 6832 bytes left >>> >>> net_namespace: 320 bytes >>> >>> NET: Registered protocol family 16 >>> >>> khelper used greatest stack depth: 6536 bytes left >>> >>> RTS Init: Dec 17 2009 14:44:42 CPLD Version: 0a02 >>> >>> set_uart_alt_func:irq = 21 alt_func = 1 >>> >>> set_uart_alt_func:irq = 20 alt_func = 1 >>> >>> pwr_switch_hold_count = 30 >>> >>> khelper used greatest stack depth: 6440 bytes left >>> >>> SCSI subsystem initialized >>> >>> usbcore: registered new interface driver usbfs >>> >>> usbcore: registered new interface driver hub >>> >>> usbcore: registered new device driver usb >>> >>> NET: Registered protocol family 2 >>> >>> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>> >>> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>> >>> TCP bind hash table entries: 4096 (order: 4, 81920 bytes) >>> >>> TCP: Hash tables configured (established 4096 bind 4096) >>> >>> TCP reno registered >>> >>> NET: Registered protocol family 1 >>> >>> checking if image is initramfs...it isn't (no cpio magic); looks like >>> >>> an >>> >>> initrd >>> >>> Freeing initrd memory: 22129K >>> >>> rts-kbd: Traker 5 keyboard >>> >>> input: rts-kbd as /class/input/input0 >>> >>> audit: initializing netlink socket (disabled) >>> >>> type=2000 audit(8.940:1): initialized >>> >>> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>> >>> msgmni has been set to 245 >>> >>> io scheduler noop registered >>> >>> io scheduler anticipatory registered >>> >>> io scheduler deadline registered >>> >>> io scheduler cfq registered (default) >>> >>> rts_backlight_power(): power: 1 >>> >>> Console: switching to colour frame buffer device 80x15 >>> >>> pxafb_smart_thread: not properly initialized, thread terminated >>> >>> ipmi message handler version 39.2 >>> >>> ipmi device interface >>> >>> IPMI Watchdog: driver initialized >>> >>> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART >>> >>> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART >>> >>> console [ttyS1] enabled >>> >>> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART >>> >>> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART >>> >>> brd: module loaded >>> >>> loop: module loaded >>> >>> logger: created 64K log 'log_main' >>> >>> logger: created 256K log 'log_events' >>> >>> logger: created 64K log 'log_radio' >>> >>> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit >>> >>> encapsulation enabled). >>> >>> CSLIP: code copyright 1989 Regents of the University of California. >>> >>> SLIP linefill/keepalive option. >>> >>> Driver 'sd' needs updating - please use bus_type methods >>> >>> physmap platform flash device: 00100000 at 00000000 >>> >>> Found: AMD AM29LV800BB >>> >>> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>> >>> number of JEDEC chips: 1 >>> >>> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>> >>> brokenness. >>> >>> RedBoot partition parsing not available >>> >>> RTS xD/NAND driver: 14:48:29 Dec 17 2009 >>> >>> Addr: 0x06000000 >>> >>> Adding NAND chip >>> >>> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND 32MiB >>> >>> 3,3V 8-bit) >>> >>> Scanning device for bad blocks >>> >>> Using static partition definition >>> >>> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>> >>> 0x00000000-0x00200000 : "kernel image" >>> >>> 0x00200000-0x02000000 : "root file system" >>> >>> 0x00000000-0x02000000 : "entire nand device" >>> >>> Adding xD card >>> >>> No NAND device found!!! >>> >>> 116x: driver isp116x-hcd, 03 Nov 2005 >>> >>> Initializing USB Mass Storage driver... >>> >>> usbcore: registered new interface driver usb-storage >>> >>> USB Mass Storage support registered. >>> >>> usbcore: registered new interface driver usbserial >>> >>> usbserial: USB Serial Driver core >>> >>> mice: PS/2 mouse device common for all mice >>> >>> i2c /dev entries driver >>> >>> Advanced Linux Sound Architecture Driver Version 1.0.17. >>> >>> ALSA device list: >>> >>> #0: pxa2xx-ac97 (Philips UCB1400) >>> >>> IPv4 over IPv4 tunneling driver >>> >>> GRE over IPv4 tunneling driver >>> >>> TCP cubic registered >>> >>> Initializing XFRM netlink socket >>> >>> NET: Registered protocol family 17 >>> >>> NET: Registered protocol family 15 >>> >>> XScale DSP coprocessor detected. >>> >>> RAMDISK: Compressed image found at block 0 >>> >>> VFS: Mounted root (ext2 filesystem). >>> >>> Freeing init memory: 112K >>> >>> init used greatest stack depth: 4224 bytes left >>> >>> Kernel panic - not syncing: Attempted to kill init! >>> >>> >>> >>> >>> >>> Thanks >>> >>> >>> >>> >>> >>> On Thu, Dec 17, 2009 at 5:12 AM, Yi Sun <beyo...@gmail.com> wrote: >>> >>> > your init crashed. try to get some thing dump out from your init to >>> >>> > make >>> >>> > sure it works correctly >>> >>> > >>> >>> > On Wed, 2009-12-16 at 18:21 +1100, linux newbie wrote: >>> >>> >> Hi, >>> >>> >> >>> >>> >> I downloaded the latest kernel (Android supported) from git clone >>> >>> >> git://android.git.kernel.org. >>> >>> >> >>> >>> >> Modified it to include our device specific stuff and booted it with >>> >>> >> our prevoius root fs(no android) and bang got the crash. >>> >>> >> >>> >>> >> can anyone help me out to debug this issue. >>> >>> >> >>> >>> >> Uncompressing >>> >>> >> >>> >>> >> Linux................................................................................................................. >>> >>> >> done, booting the kernel. >>> >>> >> Linux version 2.6.27 (new...@newbierhel4vm) (gcc version 4.0.2) #2 >>> >>> >> Thu >>> >>> >> Dec 10 05:53:32 EST 2009 >>> >>> >> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f >>> >>> >> Machine: RTS G5 >>> >>> >> Got g5 info >>> >>> >> 102292 C 1 3 >>> >>> >> 00:1A:EA:10:22:92 >>> >>> >> Memory policy: ECC disabled, Data cache writeback >>> >>> >> Memory clock: 99.53MHz (*27) >>> >>> >> Run Mode clock: 199.07MHz (*2) >>> >>> >> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>> >>> >> Msc0: 97787ff8 (f6000008) >>> >>> >> Msc1: 23c7f8c (f600000c) >>> >>> >> Msc2: 7ff07ff0 (f6000010) >>> >>> >> mdcnfg: 1cb, mdrefr: 1802f >>> >>> >> cccr: 141 >>> >>> >> CPLD Version: a02 >>> >>> >> CPU0: D VIVT undefined 5 cache >>> >>> >> CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 >>> >>> >> sets >>> >>> >> CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 >>> >>> >> sets >>> >>> >> Built 1 zonelists in Zone order, mobility grouping on. Total >>> >>> >> pages: >>> >>> >> 32512 >>> >>> >> Kernel command line: root=/dev/mtdblock2 rootfstype=jffs2 >>> >>> >> console=ttyS1,115200 >>> >>> >> PID hash table entries: 512 (order: 9, 2048 bytes) >>> >>> >> Console: colour dummy device 80x30 >>> >>> >> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) >>> >>> >> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>> >>> >> Memory: 64MB 64MB = 128MB total >>> >>> >> Memory: 125596KB available (3260K code, 780K data, 116K init) >>> >>> >> SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, >>> >>> >> Nodes=1 >>> >>> >> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>> >>> >> Mount-cache hash table entries: 512 >>> >>> >> CPU: Testing write buffer coherency: ok >>> >>> >> net_namespace: 320 bytes >>> >>> >> NET: Registered protocol family 16 >>> >>> >> RTS Init: Dec 10 2009 05:06:54 CPLD Version: 0a02 >>> >>> >> set_uart_alt_func:irq = 21 alt_func = 1 >>> >>> >> set_uart_alt_func:irq = 20 alt_func = 1 >>> >>> >> pwr_switch_hold_count = 30 >>> >>> >> SCSI subsystem initialized >>> >>> >> usbcore: registered new interface driver usbfs >>> >>> >> usbcore: registered new interface driver hub >>> >>> >> usbcore: registered new device driver usb >>> >>> >> NET: Registered protocol family 2 >>> >>> >> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >>> >>> >> TCP established hash table entries: 4096 (order: 3, 32768 bytes) >>> >>> >> TCP bind hash table entries: 4096 (order: 4, 81920 bytes) >>> >>> >> TCP: Hash tables configured (established 4096 bind 4096) >>> >>> >> TCP reno registered >>> >>> >> NET: Registered protocol family 1 >>> >>> >> rts-kbd: Traker 5 keyboard >>> >>> >> input: rts-kbd as /class/input/input0 >>> >>> >> audit: initializing netlink socket (disabled) >>> >>> >> type=2000 audit(0.490:1): initialized >>> >>> >> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>> >>> >> msgmni has been set to 245 >>> >>> >> io scheduler noop registered >>> >>> >> io scheduler anticipatory registered >>> >>> >> io scheduler deadline registered >>> >>> >> io scheduler cfq registered (default) >>> >>> >> rts_backlight_power(): power: 1 >>> >>> >> Console: switching to colour frame buffer device 80x15 >>> >>> >> pxafb_smart_thread: not properly initialized, thread terminated >>> >>> >> ipmi message handler version 39.2 >>> >>> >> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART >>> >>> >> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART >>> >>> >> console [ttyS1] enabled >>> >>> >> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART >>> >>> >> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a HWUART >>> >>> >> brd: module loaded >>> >>> >> loop: module loaded >>> >>> >> logger: created 64K log 'log_main' >>> >>> >> logger: created 256K log 'log_events' >>> >>> >> logger: created 64K log 'log_radio' >>> >>> >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 >>> >>> >> bit >>> >>> >> encapsulation enabled). >>> >>> >> CSLIP: code copyright 1989 Regents of the University of California. >>> >>> >> SLIP linefill/keepalive option. >>> >>> >> Driver 'sd' needs updating - please use bus_type methods >>> >>> >> physmap platform flash device: 00100000 at 00000000 >>> >>> >> Found: AMD AM29LV800BB >>> >>> >> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>> >>> >> number of JEDEC chips: 1 >>> >>> >> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>> >>> >> brokenness. >>> >>> >> RedBoot partition parsing not available >>> >>> >> RTS xD/NAND driver: 05:07:00 Dec 10 2009 >>> >>> >> Addr: 0x06000000 >>> >>> >> Adding NAND chip >>> >>> >> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND >>> >>> >> 32MiB >>> >>> >> 3,3V 8-bit) >>> >>> >> Scanning device for bad blocks >>> >>> >> Using static partition definition >>> >>> >> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>> >>> >> 0x00000000-0x00200000 : "kernel image" >>> >>> >> 0x00200000-0x02000000 : "root file system" >>> >>> >> 0x00000000-0x02000000 : "entire nand device" >>> >>> >> Adding xD card >>> >>> >> No NAND device found!!! >>> >>> >> 116x: driver isp116x-hcd, 03 Nov 2005 >>> >>> >> Initializing USB Mass Storage driver... >>> >>> >> usbcore: registered new interface driver usb-storage >>> >>> >> USB Mass Storage support registered. >>> >>> >> usbcore: registered new interface driver usbserial >>> >>> >> usbserial: USB Serial Driver core >>> >>> >> mice: PS/2 mouse device common for all mice >>> >>> >> i2c /dev entries driver >>> >>> >> Advanced Linux Sound Architecture Driver Version 1.0.17. >>> >>> >> ALSA device list: >>> >>> >> #0: pxa2xx-ac97 (Philips UCB1400) >>> >>> >> IPv4 over IPv4 tunneling driver >>> >>> >> GRE over IPv4 tunneling driver >>> >>> >> TCP cubic registered >>> >>> >> Initializing XFRM netlink socket >>> >>> >> NET: Registered protocol family 17 >>> >>> >> NET: Registered protocol family 15 >>> >>> >> XScale DSP coprocessor detected. >>> >>> >> Empty flash at 0x00506c78 ends at 0x00506e00 >>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x00da89ec: Read >>> >>> >> 0xffffffff, calculated 0xa44aeeec >>> >>> >> Empty flash at 0x00da8a30 ends at 0x00da8c00 >>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x0108ebd8: Read >>> >>> >> 0xffffffff, calculated 0x45ea5198 >>> >>> >> mtd->read(0x3c40 bytes from 0x10943c0) returned ECC error >>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x010945c4: Read >>> >>> >> 0x0624050b, calculated 0xc6062405 >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094638: >>> >>> >> 0x85ff instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x0109463c: >>> >>> >> 0x74e0 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094640: >>> >>> >> 0xbc00 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094644: >>> >>> >> 0x5f68 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094648: >>> >>> >> 0x6000 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x0109464c: >>> >>> >> 0xa400 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094654: >>> >>> >> 0x8000 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094658: >>> >>> >> 0xac00 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x0109465c: >>> >>> >> 0xac00 instead >>> >>> >> jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at >>> >>> >> 0x01094660: >>> >>> >> 0xac00 instead >>> >>> >> Further such events for this erase block will not be printed >>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x0109a5d0: Read >>> >>> >> 0xffffffff, calculated 0x662e61ab >>> >>> >> Empty flash at 0x010d8c10 ends at 0x010d8e00 >>> >>> >> Empty flash at 0x010e9614 ends at 0x010e9800 >>> >>> >> jffs2_scan_inode_node(): CRC failed on node at 0x010ee5ec: Read >>> >>> >> 0xffffffff, calculated 0xe54a14a9 >>> >>> >> jffs2_scan_dirent_node(): Node CRC failed on node at 0x012299f0: >>> >>> >> Read >>> >>> >> 0xffffffff, calculated 0x17e5bbcb >>> >>> >> Empty flash at 0x01229a20 ends at 0x01229c00 >>> >>> >> jffs2_scan_dirent_node(): Node CRC failed on node at 0x012f2bf4: >>> >>> >> Read >>> >>> >> 0xffffffff, calculated 0x2322e93d >>> >>> >> Empty flash at 0x012f2c24 ends at 0x012f2e00 >>> >>> >> VFS: Mounted root (jffs2 filesystem). >>> >>> >> Freeing init memory: 116K >>> >>> >> Kernel panic - not syncing: Attempted to kill init! >>> >>> >> >>> >>> >> On Wed, Dec 16, 2009 at 4:48 PM, Sayiram K N >>> >>> >> <sayiram.koth...@gmail.com> wrote: >>> >>> >> > Hi >>> >>> >> > before loading the android can you try to load the linux kernel?? >>> >>> >> > if >>> >>> >> > it succeeds then you can switch to Android.may be change the root >>> >>> >> > args >>> >>> >> > as /sbin/init >>> >>> >> > >>> >>> >> > >>> >>> >> > On 12/16/09, jack <yichang.zhu...@gmail.com> wrote: >>> >>> >> >> Hello, >>> >>> >> >> >>> >>> >> >> As Novin said, your kernel does not have the necessary stuff >>> >>> >> >> Android >>> >>> >> >> needs. >>> >>> >> >> You have to get your source code from >>> >>> >> >> http://android.git.kernel.org/ >>> >>> >> >> >>> >>> >> >> Regards, >>> >>> >> >> Jack >>> >>> >> >> >>> >>> >> >> On 12月16日, 上午10時08分, linux newbie <linux.newbi...@gmail.com> >>> >>> >> >> wrote: >>> >>> >> >>> Hi, >>> >>> >> >>> >>> >>> >> >>> I already enabled CONFIG_ARM_THUMB. >>> >>> >> >>> >>> >>> >> >>> Is it enough to make changes in make menuconfig of downloaded >>> >>> >> >>> kernel >>> >>> >> >>> for android? I am not finding ashmem under kernel/mm. >>> >>> >> >>> >>> >>> >> >>> Thanks >>> >>> >> >>> >>> >>> >> >>> >>> >>> >> >>> >>> >>> >> >>> On Wed, Dec 16, 2009 at 12:58 PM, jack >>> >>> >> >>> <yichang.zhu...@gmail.com> >>> >>> >> >>> wrote: >>> >>> >> >>> > Hello, >>> >>> >> >>> >>> >>> >> >>> > Your log before the kernel panic is much the same as what I >>> >>> >> >>> > had >>> >>> >> >>> > before. >>> >>> >> >>> > I solve my problem by enabling the CONFIG_ARM_THUMB of >>> >>> >> >>> > processor >>> >>> >> >>> > feature to support Thumb user binaries. >>> >>> >> >>> > Good luck. >>> >>> >> >>> >>> >>> >> >>> > Regards, >>> >>> >> >>> > Jack >>> >>> >> >>> >>> >>> >> >>> > On 12月16日, 上午7時53分, linux newbie <linux.newbi...@gmail.com> >>> >>> >> >>> > wrote: >>> >>> >> >>> >> Hi, >>> >>> >> >>> >>> >>> >> >>> >> Here is the log before crash. >>> >>> >> >>> >>> >>> >> >>> >> Starting kernel ... >>> >>> >> >>> >>> >>> >> >>> >> Uncompressing >>> >>> >> >>> >> >>> >>> >> >>> >> >>> >>> >> >>> >> Linux...................................................................... >>> >>> >> >>> >> ..................................................... >>> >>> >> >>> >> done, booting the kernel. >>> >>> >> >>> >> Linux version 2.6.31.1 (new...@ubuntu910vm) (gcc version >>> >>> >> >>> >> 4.4.0 >>> >>> >> >>> >> (GCC) ) >>> >>> >> >>> >> #29 Tue Dec 15 14:54:04 PST 2009 >>> >>> >> >>> >> CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), >>> >>> >> >>> >> cr=0000397f >>> >>> >> >>> >> CPU: VIVT data cache, VIVT instruction cache >>> >>> >> >>> >> Machine: RTS G5 >>> >>> >> >>> >> Got g5 info >>> >>> >> >>> >> 102292 C 1 3 >>> >>> >> >>> >> 00:1A:EA:10:22:92 >>> >>> >> >>> >> Memory policy: ECC disabled, Data cache writeback >>> >>> >> >>> >> Memory clock: 99.53MHz (*27) >>> >>> >> >>> >> Run Mode clock: 199.07MHz (*2) >>> >>> >> >>> >> Turbo Mode clock: 199.07MHz (*1.0, inactive) >>> >>> >> >>> >> Msc0: 97787ff8 (f6000008) >>> >>> >> >>> >> Msc1: 23c7f8c (f600000c) >>> >>> >> >>> >> Msc2: 7ff07ff0 (f6000010) >>> >>> >> >>> >> mdcnfg: 1cb, mdrefr: 1802f >>> >>> >> >>> >> cccr: 141 >>> >>> >> >>> >> CPLD Version: a02 >>> >>> >> >>> >> Built 1 zonelists in Zone order, mobility grouping on. >>> >>> >> >>> >> Total >>> >>> >> >>> >> pages: >>> >>> >> >>> >> 32512 >>> >>> >> >>> >> Kernel command line: root=/dev/ram0 rootfstype=ext2 >>> >>> >> >>> >> console=ttyS1,115200 >>> >>> >> >>> >> PID hash table entries: 512 (order: 9, 2048 bytes) >>> >>> >> >>> >> Dentry cache hash table entries: 16384 (order: 4, 65536 >>> >>> >> >>> >> bytes) >>> >>> >> >>> >> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) >>> >>> >> >>> >> Memory: 64MB 64MB = 128MB total >>> >>> >> >>> >> Memory: 103580KB available (3424K code, 397K data, 108K >>> >>> >> >>> >> init, 0K >>> >>> >> >>> >> highmem) >>> >>> >> >>> >> SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, >>> >>> >> >>> >> CPUs=1, >>> >>> >> >>> >> Nodes=1 >>> >>> >> >>> >> NR_IRQS:208 >>> >>> >> >>> >> Console: colour dummy device 80x30 >>> >>> >> >>> >> Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560) >>> >>> >> >>> >> Mount-cache hash table entries: 512 >>> >>> >> >>> >> CPU: Testing write buffer coherency: ok >>> >>> >> >>> >> NET: Registered protocol family 16 >>> >>> >> >>> >> RTS Init: Dec 14 2009 21:48:29 CPLD Version: 0a02 >>> >>> >> >>> >> set_uart_alt_func:irq = 21 alt_func = 1 >>> >>> >> >>> >> set_uart_alt_func:irq = 20 alt_func = 1 >>> >>> >> >>> >> pwr_switch_hold_count = 30 >>> >>> >> >>> >> bio: create slab <bio-0> at 0 >>> >>> >> >>> >> SCSI subsystem initialized >>> >>> >> >>> >> usbcore: registered new interface driver usbfs >>> >>> >> >>> >> usbcore: registered new interface driver hub >>> >>> >> >>> >> usbcore: registered new device driver usb >>> >>> >> >>> >> cfg80211: Calling CRDA to update world regulatory domain >>> >>> >> >>> >> NET: Registered protocol family 2 >>> >>> >> >>> >> IP route cache hash table entries: 1024 (order: 0, 4096 >>> >>> >> >>> >> bytes) >>> >>> >> >>> >> TCP established hash table entries: 4096 (order: 3, 32768 >>> >>> >> >>> >> bytes) >>> >>> >> >>> >> TCP bind hash table entries: 4096 (order: 2, 16384 bytes) >>> >>> >> >>> >> TCP: Hash tables configured (established 4096 bind 4096) >>> >>> >> >>> >> TCP reno registered >>> >>> >> >>> >> NET: Registered protocol family 1 >>> >>> >> >>> >> Trying to unpack rootfs image as initramfs... >>> >>> >> >>> >> rootfs image is not initramfs (no cpio magic); looks like an >>> >>> >> >>> >> initrd >>> >>> >> >>> >> Freeing initrd memory: 22128K >>> >>> >> >>> >> rts-kbd: Traker 5 keyboard >>> >>> >> >>> >> input: rts-kbd as /class/input/input0 >>> >>> >> >>> >> NetWinder Floating Point Emulator V0.97 (double precision) >>> >>> >> >>> >> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >>> >>> >> >>> >> msgmni has been set to 245 >>> >>> >> >>> >> alg: No test for stdrng (krng) >>> >>> >> >>> >> io scheduler noop registered >>> >>> >> >>> >> io scheduler anticipatory registered >>> >>> >> >>> >> io scheduler deadline registered >>> >>> >> >>> >> io scheduler cfq registered (default) >>> >>> >> >>> >> rts_backlight_power(): power: 1 >>> >>> >> >>> >> Console: switching to colour frame buffer device 80x15 >>> >>> >> >>> >> ipmi message handler version 39.2 >>> >>> >> >>> >> ipmi device interface >>> >>> >> >>> >> IPMI Watchdog: driver initialized >>> >>> >> >>> >> pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a >>> >>> >> >>> >> FFUART >>> >>> >> >>> >> pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a >>> >>> >> >>> >> BTUART >>> >>> >> >>> >> console [ttyS1] enabled >>> >>> >> >>> >> pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a >>> >>> >> >>> >> STUART >>> >>> >> >>> >> pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 7) is a >>> >>> >> >>> >> HWUART >>> >>> >> >>> >> brd: module loaded >>> >>> >> >>> >> loop: module loaded >>> >>> >> >>> >> nbd: registered device at major 43 >>> >>> >> >>> >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, >>> >>> >> >>> >> max=256) >>> >>> >> >>> >> (6 bit >>> >>> >> >>> >> encapsulation enabled). >>> >>> >> >>> >> CSLIP: code copyright 1989 Regents of the University of >>> >>> >> >>> >> California. >>> >>> >> >>> >> SLIP linefill/keepalive option. >>> >>> >> >>> >> smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <n...@cam.org> >>> >>> >> >>> >> eth0: SMC91C11xFD (rev 1) at c88ba300 IRQ 90 [nowait] >>> >>> >> >>> >> eth0: Ethernet addr: 00:1a:ea:10:22:92 >>> >>> >> >>> >> physmap platform flash device: 00100000 at 00000000 >>> >>> >> >>> >> Found: AMD AM29LV800BB >>> >>> >> >>> >> physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank >>> >>> >> >>> >> number of JEDEC chips: 1 >>> >>> >> >>> >> cfi_cmdset_0002: Disabling erase-suspend-program due to code >>> >>> >> >>> >> brokenness. >>> >>> >> >>> >> RedBoot partition parsing not available >>> >>> >> >>> >> RTS xD/NAND driver: 21:53:13 Dec 14 2009 >>> >>> >> >>> >> Addr: 0x06000000 >>> >>> >> >>> >> Adding NAND chip >>> >>> >> >>> >> NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba >>> >>> >> >>> >> NAND >>> >>> >> >>> >> 32MiB >>> >>> >> >>> >> 3,3V 8-bit) >>> >>> >> >>> >> Scanning device for bad blocks >>> >>> >> >>> >> Bad eraseblock 0 at 0x000000000000 >>> >>> >> >>> >> Using static partition definition >>> >>> >> >>> >> Creating 3 MTD partitions on "NAND 32MiB 3,3V 8-bit": >>> >>> >> >>> >> 0x000000000000-0x000000200000 : "kernel image" >>> >>> >> >>> >> 0x000000200000-0x000002000000 : "root file system" >>> >>> >> >>> >> 0x000000000000-0x000002000000 : "entire nand device" >>> >>> >> >>> >> Adding xD card >>> >>> >> >>> >> No NAND device found!!! >>> >>> >> >>> >> reset disable >>> >>> >> >>> >> driver isp1362-hcd, 2005-04-04 >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISP1362 Host Controller >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: new USB bus registered, assigned >>> >>> >> >>> >> bus >>> >>> >> >>> >> number >>> >>> >> >>> >> 1 >>> >>> >> >>> >> isp1362_hc_reset: >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: irq 87, io mem 0x08000000 >>> >>> >> >>> >> isp1362_hc_start: >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISP1362 Memory usage: >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ISTL: 2 * 256: 512 @ >>> >>> >> >>> >> $0000:$0100 >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: INTL: 16 * ( 64+8): 1152 @ >>> >>> >> >>> >> $0200 >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: ATL : 32 * ( 64+8): 2304 @ >>> >>> >> >>> >> $0680 >>> >>> >> >>> >> isp1362-hcd isp1362-hcd.0: USED/FREE: 3968 128 >>> >>> >> >>> >> usb usb1: New USB device found, idVendor=1d6b, >>> >>> >> >>> >> idProduct=0001 >>> >>> >> >>> >> usb usb1: New USB device strings: Mfr=3, Product=2, >>> >>> >> >>> >> SerialNumber=1 >>> >>> >> >>> >> usb usb1: Product: ISP1362 Host Controller >>> >>> >> >>> >> usb usb1: Manufacturer: Linux 2.6.31.1 isp1362-hcd >>> >>> >> >>> >> usb usb1: SerialNumber: isp1362-hcd.0 >>> >>> >> >>> >> usb usb1: configuration #1 chosen from 1 choice >>> >>> >> >>> >> hub 1-0:1.0: USB hub found >>> >>> >> >>> >> hub 1-0:1.0: 2 ports detected >>> >>> >> >>> >> ISP1362 Host Controller, irq 87 >>> >>> >> >>> >> Initializing USB Mass Storage driver... >>> >>> >> >>> >> usbcore: registered new interface driver usb-storage >>> >>> >> >>> >> USB Mass Storage support registered. >>> >>> >> >>> >> usbcore: registered new interface driver usbserial >>> >>> >> >>> >> usbserial: USB Serial Driver core >>> >>> >> >>> >> mice: PS/2 mouse device common for all mice >>> >>> >> >>> >> i2c /dev entries driver >>> >>> >> >>> >> I2C: i2c-0: PXA I2C adapter >>> >>> >> >>> >> Advanced Linux Sound Architecture Driver Version 1.0.20. >>> >>> >> >>> >> ALSA device list: >>> >>> >> >>> >> #0: pxa2xx-ac97 (Philips UCB1400) >>> >>> >> >>> >> IPv4 over IPv4 tunneling driver >>> >>> >> >>> >> GRE over IPv4 tunneling driver >>> >>> >> >>> >> TCP cubic registered >>> >>> >> >>> >> Initializing XFRM netlink socket >>> >>> >> >>> >> NET: Registered protocol family 17 >>> >>> >> >>> >> NET: Registered protocol family 15 >>> >>> >> >>> >> lib80211: common routines for IEEE802.11 drivers >>> >>> >> >>> >> XScale DSP coprocessor detected. >>> >>> >> >>> >> RAMDISK: gzip image found at block 0 >>> >>> >> >>> >> VFS: Mounted root (ext2 filesystem) on device 1:0. >>> >>> >> >>> >> Freeing init memory: 108K >>> >>> >> >>> >> Kernel panic - not syncing: Attempted to kill init! >>> >>> >> >>> >> [<c00294e0>] (unwind_backtrace+0x0/0xd8) from [<c02a0524>] >>> >>> >> >>> >> (panic+0x40/0x108) >>> >>> >> >>> >> [<c02a0524>] (panic+0x40/0x108) from [<c0041318>] >>> >>> >> >>> >> (do_exit+0x68/0x5dc) >>> >>> >> >>> >> [<c0041318>] (do_exit+0x68/0x5dc) from [<c0041918>] >>> >>> >> >>> >> (do_group_exit+0x8c/0xc0) >>> >>> >> >>> >> [<c0041918>] (do_group_exit+0x8c/0xc0) from [<c004a48c>] >>> >>> >> >>> >> (get_signal_to_deliver+0x2d8/0x310) >>> >>> >> >>> >> [<c004a48c>] (get_signal_to_deliver+0x2d8/0x310) from >>> >>> >> >>> >> [<c0026490>] >>> >>> >> >>> >> (do_signal+0x54/0x4ec) >>> >>> >> >>> >> [<c0026490>] (do_signal+0x54/0x4ec) from [<c0023e0c>] >>> >>> >> >>> >> (work_pending+0x1c/0x20) >>> >>> >> >>> >>> >>> >> >>> >> On Wed, Dec 16, 2009 at 9:32 AM, linux newbie >>> >>> >> >>> >> <linux.newbi...@gmail.com> wrote: >>> >>> >> >>> >> > Hi, >>> >>> >> >>> >>> >>> >> >>> >> > I download the 2.6.31 kernel from kernel.org and updated >>> >>> >> >>> >> > it >>> >>> >> >>> >> > with our >>> >>> >> >>> >> > board specific patch. Then I enabled Android specific >>> >>> >> >>> >> > stuff >>> >>> >> >>> >> > using >>> >>> >> >>> >> > make >>> >>> >> >>> >> > menuconfig -> device drivers->staging drivers->Andriod. >>> >>> >> >>> >>> >>> >> >>> >> > I havent updated the kernel with yaffs2 patch, as I am >>> >>> >> >>> >> > downloading >>> >>> >> >>> >> > the >>> >>> >> >>> >> > andriod rootfs into SDRAM (ext2) and commenting out >>> >>> >> >>> >> > mounting >>> >>> >> >>> >> > yaffs2 >>> >>> >> >>> >> > in >>> >>> >> >>> >> > init.rc file. >>> >>> >> >>> >>> >>> >> >>> >> > Apart from above kernel modifications do I need to make >>> >>> >> >>> >> > any >>> >>> >> >>> >> > other >>> >>> >> >>> >> > changes in kernel? >>> >>> >> >>> >>> >>> >> >>> >> > Thanks >>> >>> >> >>> >>> >>> >> >>> >> > On Wed, Dec 16, 2009 at 7:05 AM, Novin S. >>> >>> >> >>> >> > <novin...@gmail.com> >>> >>> >> >>> >> > wrote: >>> >>> >> >>> >> >> The problem is that the kernel you are using on your >>> >>> >> >>> >> >> device >>> >>> >> >>> >> >> is not >>> >>> >> >>> >> >> suited for the version of the root fs or it is not >>> >>> >> >>> >> >> properly >>> >>> >> >>> >> >> patched >>> >>> >> >>> >> >> with android specific diffs.... >>> >>> >> >>> >>> >>> >> >>> >> >> On Dec 15, 3:24 pm, "Dennis.Yxun" <dennis.y...@gmail.com> >>> >>> >> >>> >> >> wrote: >>> >>> >> >>> >> >>> do u use ramdisk or others? >>> >>> >> >>> >> >>> make sure kernel can find 'init' program >>> >>> >> >>> >>> >>> >> >>> >> >>> On Tue, Dec 15, 2009 at 4:34 PM, linux newbie >>> >>> >> >>> >> >>> <linux.newbi...@gmail.com>wrote: >>> >>> >> >>> >>> >>> >> >>> >> >>> > Hi, >>> >>> >> >>> >>> >>> >> >>> >> >>> > Thanks for your reply. >>> >>> >> >>> >>> >>> >> >>> >> >>> > As the messages are printing on the lcd, I couldn't >>> >>> >> >>> >> >>> > able >>> >>> >> >>> >> >>> > to get >>> >>> >> >>> >> >>> > the >>> >>> >> >>> >> >>> > logs. Anyway I shall try tomorrow. >>> >>> >> >>> >> >>> > After Freeing Init memory, I am getting this Kernel >>> >>> >> >>> >> >>> > Panic >>> >>> >> >>> >> >>> > (seems >>> >>> >> >>> >> >>> > console is opened properly) >>> >>> >> >>> >>> >>> >> >>> >> >>> > Please let me know, whether the procedure I am using >>> >>> >> >>> >> >>> > to >>> >>> >> >>> >> >>> > bring up >>> >>> >> >>> >> >>> > Android is correct or not? >>> >>> >> >>> >>> >>> >> >>> >> >>> > Thanks >>> >>> >> >>> >>> >>> >> >>> >> >>> > On Tue, Dec 15, 2009 at 6:29 PM, jack >>> >>> >> >>> >> >>> > <yichang.zhu...@gmail.com> >>> >>> >> >>> >> >>> > wrote: >>> >>> >> >>> >> >>> > > Hello, >>> >>> >> >>> >>> >>> >> >>> >> >>> > > According to my porting experience, there will be >>> >>> >> >>> >> >>> > > many >>> >>> >> >>> >> >>> > > causes >>> >>> >> >>> >> >>> > > resulting in kernel panic. >>> >>> >> >>> >> >>> > > Pasting more logs before the line kernel panic will >>> >>> >> >>> >> >>> > > help >>> >>> >> >>> >> >>> > > for >>> >>> >> >>> >> >>> > > others to >>> >>> >> >>> >> >>> > > figure out your problem. Thanks. >>> >>> >> >>> >>> >>> >> >>> >> >>> > > Regards >>> >>> >> >>> >> >>> > > Jack >>> >>> >> >>> >>> >>> >> >>> >> >>> > > On 12月15日, >>> >>> >> >>> >>> >>> >> >>> ... >>> >>> >> >>> >>> >>> >> >>> 閱讀更多 »- 隱藏被引用文字 - >>> >>> >> >>> >>> >>> >> >>> - 顯示被引用文字 - >>> >>> >> >> >>> >>> >> >> -- >>> >>> >> >> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >>> >> >> website: http://groups.google.com/group/android-porting >>> >>> >> > >>> >>> >> > -- >>> >>> >> > unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >>> >> > website: http://groups.google.com/group/android-porting >>> >>> >> >>> >>> >> -- >>> >>> >> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >>> >> website: http://groups.google.com/group/android-porting >>> >>> > >>> >>> > >>> >>> > -- >>> >>> > Android-x86 >>> >>> > www.android-x86.org >>> >>> > >>> >>> > -- >>> >>> > unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >>> > website: http://groups.google.com/group/android-porting >>> >>> >>> >>> -- >>> >>> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >>> website: http://groups.google.com/group/android-porting >>> >> >>> >> -- >>> >> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> >> website: http://groups.google.com/group/android-porting >>> > >>> >>> -- >>> unsubscribe: android-porting+unsubscr...@googlegroups.com >>> website: http://groups.google.com/group/android-porting >> >> -- >> unsubscribe: android-porting+unsubscr...@googlegroups.com >> website: http://groups.google.com/group/android-porting > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
