hi, i have same problem as you, i think that we must see donut branch where bt worked and rewrite it to eclair. In /external/bluetooth/bluez/ tools/hciattach_ti.c you will find loading TIInit file, i tryed to rewrite it to brf63000.bin but it didn't work, so i will try donut branch, if you will solve this problem, please write me message, thanks
On 8 led, 00:54, vkat <rpran...@gmail.com> wrote: > Hi, > I was able to build the latest master branch (I am assuming Eclair) > and get it working on ADP2. However I am having trouble getting the > bluetooth chip working. I am tryin to develop bluetooth app on ADP2 > using Android 2.0. > > When I manually run "/system/bin/hciattach -n -s 115200 /dev/ttyHS0 > texas 4000000 flow" after powering on the bluetooth chip using "echo 1 > > > /sys/class/rfkill/rfkill0/state" > > I get the following messages. > > # /system/bin/hciattach -n -s 115200 /dev/ttyHS0 texas 4000000 flow > /system/bin/hciattach -n -s 115200 /dev/ttyHS0 texas 4000000 flow > Found a Texas Instruments' chip! > Firmware file : /lib/firmware/TIInit_4.2.38.bts > can't open firmware file: No such file or directory > Warning: cannot find BTS file: /lib/firmware/TIInit_4.2.38.bts > Device setup complete > > # hciconfig > hciconfig > hci0: Type: UART > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN INIT RUNNING > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:52 acl:0 sco:0 commands:13 errors:0 > > How do i get to load the /system/etc/firmware/brf6300.bin file > instead? > > Help is appreciated. I am relatively new to Android development.
-- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting