Hi Deva, Changes made and no differences seen from retest.
I am wondering whether I have to change access right (chmod) to the root files (in the images) or not? Regards David On 24 Mar, 17:58, Deva R <r.deva...@gmail.com> wrote: > have you modified init.rc from the prebuilt package? > > root file system and especially '/system' is gone for toss, after > mounting yaffs file system to '/' > > NAND yaffs file system is mounted in your init.rc, and it should be > like below sequence.. to set '/system' and '/data' properly.. > > mount yaffs2 m...@system /system > mount yaffs2 m...@system /system ro remount > mount yaffs2 m...@userdata /data nosuid nodev > mount yaffs2 m...@cache /cache nosuid nodev > > if any issue there in mounting, services that are to be run after > parsing init.rc will fail, as you see in the log.. > > > > On Wed, Mar 24, 2010 at 3:18 PM, david <dajun.c...@gmail.com> wrote: > > Problem seen in running Android Eclair (prebuild images from Samsung) > > on an SMDK6410: > > > ================================================================================= > > > U-BOOT# nand read 50008000 600000 300000;nand read 50800000 900000 > > 100000;bootm 50008000 50800000 > > > NAND read: device 0 offset 0x6291456, size 0x3145728 > > > 3145728 bytes read: OK > > > NAND read: device 0 offset 0x9437184, size 0x1048576 > > > 1048576 bytes read: OK > > > Boot with zImage > > > do not support this address : 50008000 > > > get_format > > > -------- 1 -------- > > > ## Loading init Ramdisk from Legacy Image at 50800000 ... > > > Image Name: ramdisk > > > Created: 2010-02-12 5:54:20 UTC > > > Image Type: ARM Linux RAMDisk Image (uncompressed) > > > Data Size: 159996 Bytes = 156.2 kB > > > Load Address: 50800000 > > > Entry Point: 50800000 > > > Verifying Checksum ... OK > > > Starting kernel ... > > > Uncompressing > > Linux.............................................................................................................................. > > done, booting the kernel. > > > [ 0.000000] Linux version 2.6.29 (hsk...@hskang-desktop) (gcc > > version 4.3.1 (for S3C64XX Samsung Electronics AP Development Team) ) > > #1 Fri Feb 12 14:20:27 KST 2010 > > [ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 > > (ARMv7), cr=00c5307f > > [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing > > instruction cache > > [ 0.000000] Machine: SMDK6410 > > [ 0.000000] Ignoring unrecognised tag 0x00000000 > > [ 0.000000] Ignoring unrecognised tag 0x41001099 > > [ 0.000000] Memory policy: ECC disabled, Data cache writeback > > [ 0.000000] CPU S3C6410 (id 0x36410101) > > [ 0.000000] S3C Clocks, (c) 2004 Simtec Electronics > > [ 0.000000] S3C64XX: PLL settings, A=532000000, M=532000000, > > E=24000000 > > [ 0.000000] S3C64XX: HCLKx2=266000000, HCLK=133000000, > > PCLK=66500000 > > [ 0.000000] mout_apll: source is fout_apll (1), rate is 532000000 > > [ 0.000000] mout_epll: source is fout_epll (1), rate is 24000000 > > [ 0.000000] mout_mpll: source is mpll (1), rate is 532000000 > > [ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000 > > [ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000 > > [ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000 > > [ 0.000000] usb-host-bus: source is mout_epll (0), rate is 24000000 > > [ 0.000000] lcd: source is dout_mpll (1), rate is 266000000 > > [ 0.000000] uclk1: source is dout_mpll (1), rate is 66500000 > > [ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000 > > [ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000 > > [ 0.000000] sclk_audio0: source is mout_epll (0), rate is 24000000 > > [ 0.000000] sclk_audio1: source is mout_epll (0), rate is 24000000 > > [ 0.000000] sclk_audio2: source is mout_epll (0), rate is 24000000 > > [ 0.000000] irda-bus: source is mout_epll (0), rate is 24000000 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > > Total pages: 21336 > > [ 0.000000] Kernel command line: console=ttySAC0,115200 > > [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) > > [ 0.000446] Console: colour dummy device 80x30 > > [ 0.000614] console [ttySAC0] enabled > > [ 0.180467] Dentry cache hash table entries: 16384 (order: 4, 65536 > > bytes) > > [ 0.187935] Inode-cache hash table entries: 8192 (order: 3, 32768 > > bytes) > > [ 0.202454] Memory: 84MB = 84MB total > > [ 0.202516] Memory: 80276KB available (3588K code, 946K data, 152K > > init) > > [ 0.208181] Calibrating delay loop... 132.71 BogoMIPS (lpj=331776) > > [ 0.320602] Mount-cache hash table entries: 512 > > [ 0.322427] CPU: Testing write buffer coherency: ok > > [ 0.329687] net_namespace: 520 bytes > > [ 0.332209] NET: Registered protocol family 16 > > [ 0.352160] S3C6410 Power Management, (c) 2008 Samsung Electronics > > [ 0.352920] S3C6410: Initialising architecture > > [ 0.357242] S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung > > Electronics > > [ 0.364523] Total 32 DMA channels will be initialized. > > [ 0.373121] GPIO-155 autorequested > > [ 0.373166] GPIO-156 autorequested > > [ 0.376394] GPIO-157 autorequested > > [ 0.379593] GPIO-158 autorequested > > [ 0.383012] GPIO-159 autorequested > > [ 0.386380] GPIO-129 autorequested > > [ 0.389734] GPIO-130 autorequested > > [ 0.393139] GPIO-131 autorequested > > [ 0.439668] bio: create slab <bio-0> at 0 > > [ 0.453902] NET: Registered protocol family 2 > > [ 0.454251] IP route cache hash table entries: 1024 (order: 0, 4096 > > bytes) > > [ 0.460754] TCP established hash table entries: 4096 (order: 3, > > 32768 bytes) > > [ 0.467000] TCP bind hash table entries: 4096 (order: 2, 16384 > > bytes) > > [ 0.473216] TCP: Hash tables configured (established 4096 bind > > 4096) > > [ 0.479289] TCP reno registered > > [ 0.482845] NET: Registered protocol family 1 > > [ 0.487722] checking if image is initramfs... it is > > [ 0.593806] Freeing initrd memory: 156K > > [ 0.594752] S3C PWM Driver, (c) 2006-2007 Samsung Electronics > > [ 0.598249] NetWinder Floating Point Emulator V0.97 (double > > precision) > > [ 0.611245] ashmem: initialized > > [ 0.613900] yaffs Feb 12 2010 14:19:57 Installing. > > [ 0.614035] msgmni has been set to 157 > > [ 0.619048] alg: No test for stdrng (krng) > > [ 0.621637] io scheduler noop registered > > [ 0.625444] io scheduler anticipatory registered (default) > > [ 0.630831] io scheduler deadline registered > > [ 0.635277] io scheduler cfq registered > > [ 0.639642] S3C_LCD clock got enabled :: 266.000 Mhz > > [ 0.650071] LCD TYPE :: LTE480WV will be initialized > > [ 0.777005] Window[0] - FB1: map_video_memory: clear > > ff000000:00177000 > > [ 0.782868] FB1: map_video_memory: dma=54e00000 > > cpu=ff000000 size=00177000 > > [ 0.785842] Window[0] - FB2: map_video_memory: clear > > ff0bb800:000bb800 > > [ 0.792339] FB2: map_video_memory: dma=54ebb800 > > cpu=ff0bb800 size=000bb800 > > [ 0.813949] Console: switching to colour frame buffer device 100x30 > > [ 0.826209] fb0: s3cfb frame buffer device > > [ 0.838044] Window[1] - FB1: map_video_memory: clear > > ff177000:00177000 > > [ 0.844575] FB1: map_video_memory: dma=55000000 > > cpu=ff177000 size=00177000 > > [ 0.846901] Window[1] - FB2: map_video_memory: clear > > ff232800:000bb800 > > [ 0.853398] FB2: map_video_memory: dma=550bb800 > > cpu=ff232800 size=000bb800 > > [ 0.862111] fb1: s3cfb frame buffer device > > [ 0.865960] SMDK board LCD Backlight Device Driver (c) 2008 Samsung > > Electronics > > [ 0.873533] Registered led device: lcd-backlight > > [ 1.494304] lp: driver loaded but no devices found > > [ 1.494364] S3C64XX ADC driver, (c) 2007 Samsung Electronics > > [ 1.499432] ADC platform data read > > [ 1.503606] S3C64XX ADC driver successfully probed ! > > [ 1.508967] ppdev: user-space parallel port driver > > [ 1.512588] s3c64xx-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = > > 16) is a S3C64XX > > [ 1.521544] s3c64xx-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = > > 20) is a S3C64XX > > [ 1.529078] s3c64xx-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = > > 24) is a S3C64XX > > [ 1.536741] s3c64xx-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = > > 28) is a S3C64XX > > [ 1.566775] brd: module loaded > > [ 1.578258] loop: module loaded > > [ 1.578434] pmem: 1 init > > [ 1.580269] pmem_render: 0 init > > [ 1.582690] pmem_stream: 0 init > > [ 1.585924] pmem_stream2: 0 init > > [ 1.588946] pmem_preview: 0 init > > [ 1.592360] pmem_picture: 0 init > > [ 1.595561] pmem_jpeg: 0 init > > [ 1.598833] Linux video capture interface: v2.00 > > [ 1.610145] Request irq 35 for codec > > [ 1.610214] Request irq 36 for preview > > [ 1.614018] S3C FIMC v3.0 > > [ 1.616930] S3C G2D Init : Done > > [ 1.617725] S3C G3D Driver, (c) 2007-2009 Samsung Electronics > > [ 1.625220] s3c_g3d version : 0x1050000 > > [ 1.627273] G3D_RESERVED_MEM_SIZE : 24 MB > > [ 1.631307] G3D_CHUNK_SIZE : 2 MB > > [ 1.634540] G3D_CHUNK_NUM : 12 (UI_CHUNK:4) > > [ 1.638813] 0 th virt_addr = 0xc6800000, phy_addr = 0x56800000 > > [ 1.644567] 1 th virt_addr = 0xc6a00000, phy_addr = 0x56a00000 > > [ 1.650366] 2 th virt_addr = 0xc6c00000, phy_addr = 0x56c00000 > > [ 1.656169] 3 th virt_addr = 0xc6e00000, phy_addr = 0x56e00000 > > [ 1.661971] 4 th virt_addr = 0xc7000000, phy_addr = 0x57000000 > > [ 1.667778] 5 th virt_addr = 0xc7200000, phy_addr = 0x57200000 > > [ 1.673589] 6 th virt_addr = 0xc7400000, phy_addr = 0x57400000 > > [ 1.679394] 7 th virt_addr = 0xc7600000, phy_addr = 0x57600000 > > [ 1.685211] 8 th virt_addr = 0xc7800000, phy_addr = 0x57800000 > > [ 1.691010] 9 th virt_addr = 0xc7a00000, phy_addr = 0x57a00000 > > [ 1.696837] 10 th virt_addr = 0xc7c00000, phy_addr = 0x57c00000 > > [ 1.702723] 11 th virt_addr = 0xc7e00000, phy_addr = 0x57e00000 > > [ 1.709261] S3C6400 MFC Driver, (c) 2007 Samsung Electronics > > [ 1.719156] S3C6400 MFC driver module init OK. > > [ 1.719215] S3C > > ... > > read more »- Hide quoted text - > > - Show quoted text - -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting To unsubscribe from this group, send email to android-porting+unsubscribegooglegroups.com or reply to this email with the words "REMOVE ME" as the subject.
