I think the problem is on this: init: cannot find '/system/bin/mediaserver', disabling 'media'
I think you need to find out why mediaserver is missing on your File System. Look also for /system/lib/libmedia.so Alex. On Sep 23, 6:38 am, venki <realfriend.ve...@gmail.com> wrote: > Yes. I have done it and pasted last few lines in my previous reply. It > is waiting for sevice media.audio_policy... > > On Sep 23, 7:59 am, Dark Knight <vaisakhru...@gmail.com> wrote: > > > > > Hi, > > > Can you issue, "logcat" command from serial or adb connection, and > > check the output??? > > > Regards, > > Vaisakh P S > > (http://www.google.com/profiles/107371394824790211115) > > > On Sep 22, 8:50 pm, venki <realfriend.ve...@gmail.com> wrote: > > > > Hi I hav a beagleboard rev C4. Followed steps mentioned > > > inhttp://code.google.com/p/rowboat/, downloaded source code for eclair > > > and built it. But dvi display got stuck at 'ANDROID" screen. Through > > > serial port i got following things. please can anybody help me to > > > solve this.... > > > > Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24) > > > Reading boot sector > > > Loading u-boot.bin from nand > > > > U-Boot 2009.11-rc1-00601-g3aa4b51 (Jan 05 2010 - 20:56:38) > > > > OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz > > > OMAP3 Beagle board + LPDDR/NAND > > > I2C: ready > > > DRAM: 256 MB > > > NAND: 256 MiB > > > In: serial > > > Out: serial > > > Err: serial > > > Board revision C4 > > > Die ID #72bc000400000000040373050e00901a > > > Hit any key to stop autoboot: 0 > > > mmc0 is available > > > reading boot.scr > > > > ** Unable to read "boot.scr" from mmc 0:1 ** > > > reading uImage > > > > 2447360 bytes read > > > Booting from mmc ... > > > ## Booting kernel from Legacy Image at 82000000 ... > > > Image Name: Linux-2.6.32 > > > Image Type: ARM Linux Kernel Image (uncompressed) > > > Data Size: 2447296 Bytes = 2.3 MB > > > Load Address: 80008000 > > > Entry Point: 80008000 > > > Verifying Checksum ... OK > > > Loading Kernel Image ... OK > > > OK > > > > Starting kernel ... > > > > Uncompressing > > > Linux...................................................................... > > > .................................................................... > > > Linux version 2.6.32 (ve...@venki-laptop) (gcc version 4.4.0 (GCC) ) > > > #1 Tue Sep 21 19:41:07 IST 2010 > > > CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f > > > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > > > Machine: OMAP3 Beagle Board > > > Memory policy: ECC disabled, Data cache writeback > > > OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720m ) > > > SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 > > > Reserving 12582912 bytes SDRAM for VRAM > > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > > > 65024 > > > Kernel command line: console=ttyS2,115200n8 vram=12M > > > omapdss.def_disp=dvi omapfb.mode=dvi:1024x768mr...@60 root=/dev/ > > > mmcblk0p2 init=/init rw rootwait > > > PID hash table entries: 1024 (order: 0, 4096 bytes) > > > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > > > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > > > Memory: 128MB 128MB = 256MB total > > > Memory: 242048KB available (4224K code, 818K data, 172K init, 0K > > > highmem) > > > Hierarchical RCU implementation. > > > NR_IRQS:402 > > > Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz > > > Reprogramming SDRC clock to 332000000 Hz > > > GPMC revision 5.0 > > > IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts > > > Total of 96 interrupts on 1 active controller > > > OMAP GPIO hardware version 2.5 > > > OMAP clockevent source: GPTIMER12 at 32768 Hz > > > Console: colour dummy device 80x30 > > > Calibrating delay loop... 740.48 BogoMIPS (lpj=2891776) > > > Mount-cache hash table entries: 512 > > > CPU: Testing write buffer coherency: ok > > > regulator: core version 0.5 > > > NET: Registered protocol family 16 > > > Found NAND on CS0 > > > Registering NAND on CS0 > > > Unable to get DVI reset GPIO > > > OMAP DMA hardware revision 4.0 > > > bio: create slab <bio-0> at 0 > > > SCSI subsystem initialized > > > usbcore: registered new interface driver usbfs > > > usbcore: registered new interface driver hub > > > usbcore: registered new device driver usb > > > i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz > > > twl4030: PIH (irq 7) chaining IRQs 368..375 > > > twl4030: power (irq 373) chaining IRQs 376..383 > > > twl4030: gpio (irq 368) chaining IRQs 384..401 > > > regulator: VUSB1V5: 1500 mV normal standby > > > regulator: VUSB1V8: 1800 mV normal standby > > > regulator: VUSB3V1: 3100 mV normal standby > > > twl4030_usb twl4030_usb: Initialized TWL4030 USB module > > > regulator: VMMC1: 1850 <--> 3150 mV normal standby > > > regulator: VDAC: 1800 mV normal standby > > > regulator: VPLL2: 1800 mV normal standby > > > regulator: VSIM: 1800 <--> 3000 mV normal standby > > > i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz > > > i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz > > > Switching to clocksource 32k_counter > > > musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 > > > musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 > > > NET: Registered protocol family 2 > > > IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > > > TCP established hash table entries: 8192 (order: 4, 65536 bytes) > > > TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > > > TCP: Hash tables configured (established 8192 bind 8192) > > > TCP reno registered > > > UDP hash table entries: 256 (order: 0, 4096 bytes) > > > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > > > NET: Registered protocol family 1 > > > RPC: Registered udp transport module. > > > RPC: Registered tcp transport module. > > > RPC: Registered tcp NFSv4.1 backchannel transport module. > > > omap-iommu omap-iommu.0: isp registered > > > NetWinder Floating Point Emulator V0.97 (double precision) > > > ashmem: initialized > > > VFS: Disk quotas dquot_6.5.2 > > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > > JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. > > > msgmni has been set to 473 > > > alg: No test for stdrng (krng) > > > io scheduler noop registered > > > io scheduler deadline registered > > > io scheduler cfq registered (default) > > > OMAP DSS rev 2.0 > > > OMAP DISPC rev 3.0 > > > OMAP VENC rev 2 > > > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > > > serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654 > > > serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654 > > > serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654 > > > console [ttyS2] enabled > > > brd: module loaded > > > loop: module loaded > > > usbcore: registered new interface driver asix > > > usbcore: registered new interface driver cdc_ether > > > usbcore: registered new interface driver cdc_eem > > > usbcore: registered new interface driver dm9601 > > > usbcore: registered new interface driver smsc95xx > > > usbcore: registered new interface driver gl620a > > > usbcore: registered new interface driver net1080 > > > usbcore: registered new interface driver plusb > > > usbcore: registered new interface driver rndis_host > > > usbcore: registered new interface driver cdc_subset > > > usbcore: registered new interface driver zaurus > > > usbcore: registered new interface driver MOSCHIP usb-ethernet driver > > > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > > > ehci-omap ehci-omap.0: OMAP-EHCI Host Controller > > > ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 > > > ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 > > > ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 > > > hub 1-0:1.0: USB hub found > > > hub 1-0:1.0: 3 ports detected > > > Initializing USB Mass Storage driver... > > > usbcore: registered new interface driver usb-storage > > > USB Mass Storage support registered. > > > android init > > > android_probe pdata: c048147c > > > android_bind > > > android_usb gadget: android_usb ready > > > musb_hdrc musb_hdrc: MUSB HDRC host driver > > > musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2 > > > hub 2-0:1.0: USB hub found > > > hub 2-0:1.0: 1 port detected > > > f_adb init > > > android_register_function adb > > > adb_bind_config > > > f_mass_storage init > > > android_register_function usb_mass_storage > > > mice: PS/2 mouse device common for all mice > > > input: gpio-keys as /devices/platform/gpio-keys/input/input0 > > > i2c /dev entries driver > > > Linux video capture interface: v2.00 > > > omap-iommu omap-iommu.0: isp: version 1.1 > > > OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec > > > mmci-omap-hs mmci-omap-hs.1: err -16 configuring card detect > > > usbcore: registered new interface driver usbhid > > > usbhid: USB HID core driver > > > logger: created 64K log 'log_main' > > > logger: created 256K log 'log_events' > > > logger: created 64K log 'log_radio' > > > logger: created 64K log 'log_system' > > > Advanced Linux Sound Architecture Driver Version 1.0.21. > > > usbcore: registered new interface driver snd-usb-audio > > > usb 1-2: new high speed USB device using ehci-omap and address 2 > > > No device for DAI omap-mcbsp-dai-0 > > > No device for DAI omap-mcbsp-dai-1 > > > No device for DAI omap-mcbsp-dai-2 > > > No device for DAI omap-mcbsp-dai-3 > > > No device for DAI omap-mcbsp-dai-4 > > > OMAP3 Beagle SoC init > > > asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok > > > ALSA device list: > > > #0: omap3beagle (twl4030) > > > TCP cubic registered > > > NET: Registered protocol family 17 > > > NET: Registered protocol family 15 > > > Power Management for TI OMAP3. > > > SmartReflex driver initialized > > > VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev > > > 1 > > > fbcvt: 1024x...@60: CVT Name - .786M3-R > > > regulator_init_complete: incomplete constraints, leaving VDVI on > > > regulator_init_complete: incomplete constraints, leaving VDAC on > > > drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > > > omapdss DPI error: display already enabled > > > omap_vout omap_vout: 'dvi' Display already enabled > > > omapdss DPI error: display already enabled > > > omap_vout omap_vout: 'dvi' Display already enabled > > > omap_vout omap_vout: Buffer Size = 3686400 > > > omap_vout > > ... > > read more » -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
