Do you have a Bluetooth Air sniffer with you by any chance??? -- Ash
On Oct 20, 1:48 pm, guru <guru.nav...@gmail.com> wrote: > Hi All > > Please let me know how to debug at lower level. While transferring > file some times progress bar stops and does not move and hci dump does > not showing any traffic > > below is hcidump. > > > HCI Event: Number of Completed Packets (0x13) plen 5 > > ACL data: handle 1 flags 0x02 dlen 688 > > ACL data: handle 1 flags 0x01 dlen 329 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 811 > > ACL data: handle 1 flags 0x01 dlen 206 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 896 > > ACL data: handle 1 flags 0x01 dlen 121 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 896 > > ACL data: handle 1 flags 0x01 dlen 121 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 78 > > L2CAP(d): cid 0x0041 len 74 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 70 fcs 0xe > OBEX: Put cmd(c): len 4102 (continue) > Body (0x48) = Sequence length 4096 > < ACL data: handle 1 flags 0x02 dlen 16 > L2CAP(d): cid 0x0041 len 12 [psm 3] > RFCOMM(d): UIH: cr 0 dlci 24 pf 0 ilen 8 fcs 0xd4 > OBEX: Put rsp(f): status 100 len 8 > Connection ID (0xcb) = 1> HCI Event: Number of Completed Packets > (0x13) plen 5 > > ACL data: handle 1 flags 0x02 dlen 687 > > ACL data: handle 1 flags 0x01 dlen 330 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 760 > > ACL data: handle 1 flags 0x01 dlen 257 > > L2CAP(d): cid 0x0041 len 1013 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 1008 fcs 0xe> ACL data: handle 1 > flags 0x02 dlen 792 > > SCO data: handle 2159 flags 0x05 dlen 231 > > SCO data: handle 3094 flags 0x0a dlen 75 > > SCO data: handle 2936 flags 0x07 dlen 114 > > ACL data: handle 1 flags 0x01 dlen 329 > > ACL data: handle 1 flags 0x02 dlen 78 > > L2CAP(d): cid 0x0041 len 74 [psm 3] > RFCOMM(d): UIH: cr 1 dlci 24 pf 0 ilen 70 fcs 0xe > > Please let me know how to debug this case. > > Thanks > Gururaja B O > > On Oct 18, 9:45 am, guru <guru.nav...@gmail.com> wrote: > > > > > Hi All, > > > I am doing file transfer using blueooth. During file transfer some > > times the transfer progress bar on GUI stops on both side(sending and > > receiving side) and stays forever in that state. > > > I tried to get logs from hcidump, there it displays traffic while > > transferring but after that progress bar stops hcidump stops > > displaying traffic.! > > > can I get any clue for this behavior and at what layer I need to > > debug. > > > Thanks > > Gururaja b O -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
