Hi,
Thank u for your inputs. The board has only 128MB RAM. I have
also changed the RAM size to 128MB and checked. But still I have the
same problem.
Regards,
Vadi.
On Dec 2, 10:59 pm, Ashwin Bihari <abih...@gmail.com> wrote:
> You're going to have a REAL hard time getting Android 2.2 up on a
> system with only 64MB RAM. You'll need a minimum of 128MB for Eclair
> (2.1), I imagine the same for FroYo (2.2) or even more..
>
> Regards
> -- Ashwin
>
>
>
> On Thu, Dec 2, 2010 at 9:12 AM, Vivek <vivekgulat...@gmail.com> wrote:
> > Dear all,
> > I wanted to boot my omap 2430 SDP board with Android 2.2 using
> > kernel 2.6.32. I've done the following to bring the board up.
> > 1) I've downloaded the kernel from the following link.
> > git://android.git.kernel.org/kernel/common.git
> > 2) I checkout the tag named "v2.6.32"
> > 3) Configured the kernel for omap2430 using the default configuration
> > file named "omap_2430sdp_defconfig"
> > 4) Configured again for Android. Please find the attached
> > configuration file for your reference.
> > 5) My omap2430 board does not have a touchscreen. It only has a LCD
> > display.
> > 6) The root file system is mounted via NFS.
> > 7) The kernel messages are shown below.
>
> > ============================================================================
> > Linux version 2.6.32-00000-v2.6.32-dirty (r...@localhost.localdomain)
> > (gcc versi
> > on 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #18 PREEMPT Thu Dec 2
> > 14:50:38 IST 2010
> > CPU: ARMv6-compatible processor [4107b366] revision 6 (ARMv6TEJ),
> > cr=00c5387f
> > CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
> > Machine: OMAP2430 sdp2430 board
> > Memory policy: ECC disabled, Data cache writeback
> > OMAP2430
>
> > SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
> > Built 1 zonelists in Zone order, mobility grouping on. Total pages:
> > 16256
> > Kernel command line: console=ttyS0,115200n8=noinitrd ip=192.168.8.203
> > root=/dev/
> > nfs rw nfsroot=192.168.8.83:/home/vivek/omap2430/Android2.2/RFS,nolock
> > mem=64M v
> > ideo=omapfb.mode=dvi:240x320 init=/init
> > PID hash table entries: 256 (order: -2, 1024 bytes)
> > Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> > Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > Memory: 64MB = 64MB total
> > Memory: 60876KB available (3340K code, 445K data, 116K init, 0K
> > highmem)
> > Hierarchical RCU implementation.
> > NR_IRQS:384
> > Clocking rate (Crystal/DPLL/MPU): 13.0/660/330 MHz
> > GPMC revision 3.0
> > IRQ: Found an INTC at 0xd80fe000 (revision 3.0) with 96 interrupts
> > Total of 96 interrupts on 1 active controller
> > OMAP243x GPIO hardware version 2.4
> > OMAP clockevent source: GPTIMER1 at 13000000 Hz
> > Console: colour dummy device 80x30
> > Calibrating delay loop... 329.31 BogoMIPS (lpj=1646592)
> > Mount-cache hash table entries: 512
> > CPU: Testing write buffer coherency: ok
> > NET: Registered protocol family 16
> > OMAP DMA hardware revision 4.0
> > bio: create slab <bio-0> at 0
> > i2c_omap i2c_omap.1: bus 1 rev3.7 at 400 kHz
> > i2c_omap i2c_omap.2: bus 2 rev3.7 at 2600 kHz
> > twl4030: PIH (irq 7) chaining IRQs 368..375
> > twl4030: power (irq 373) chaining IRQs 376..383
> > Switching to clocksource gp timer
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
> > TCP established hash table entries: 2048 (order: 2, 16384 bytes)
> > TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
> > TCP: Hash tables configured (established 2048 bind 2048)
> > TCP reno registered
> > NET: Registered protocol family 1
> > RPC: Registered udp transport module.
> > RPC: Registered tcp transport module.
> > RPC: Registered tcp NFSv4.1 backchannel transport module.
> > VFS: Disk quotas dquot_6.5.2
> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
> > msgmni has been set to 119
> > alg: No test for stdrng (krng)
> > io scheduler noop registered
> > io scheduler anticipatory registered (default)
> > io scheduler deadline registered
> > io scheduler cfq registered
> > omapfb: configured for panel sdp2430
> > omapfb omapfb: timeout waiting for FRAME DONE
> > omapfb: DISPC version 3.0 initialized
> > Console: switching to colour frame buffer device 30x40
> > omapfb: Framebuffer initialized. Total vram 155648 planes 1
> > omapfb: Pixclock 5156 kHz hfreq 18.2 kHz vfreq 54.8 Hz
> > omap_rng omap_rng: OMAP Random Number Generator ver. 50
> > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
> > console [ttyS0] enabled
> > serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
> > serial8250.2: ttyS2 at MMIO 0x4806e000 (irq = 74) is a ST16654
> > brd: module loaded
> > loop: module loaded
> > omapflash.0: Found 1 x16 devices at 0x0 in 16-bit bank
> > omapflash.0: Found 1 x16 devices at 0x2000000 in 16-bit bank
> > Intel/Sharp Extended Query Table at 0x010A
> > Intel/Sharp Extended Query Table at 0x010A
> > Intel/Sharp Extended Query Table at 0x010A
> > Intel/Sharp Extended Query Table at 0x010A
> > Intel/Sharp Extended Query Table at 0x010A
> > Intel/Sharp Extended Query Table at 0x010A
> > Using buffer write method
> > Using auto-unlock on power-up/resume
> > cfi_cmdset_0001: Erase suspend on write enabled
> > Creating 4 MTD partitions on "omapflash.0":
> > 0x000000000000-0x000000040000 : "bootloader"
> > 0x000000040000-0x000000060000 : "params"
> > 0x000000060000-0x000000260000 : "kernel"
> > 0x000000260000-0x000004000000 : "filesystem"
> > OneNAND driver initializing
> > smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <n...@fluxnic.net>
> > eth0: SMC91C94 (rev 9) at c48ae300 IRQ 309 [nowait]
> > eth0: Ethernet addr: 08:00:28:01:1b:92
> > OMAP Keypad Driver
> > i2c /dev entries driver
> > OMAP Watchdog Timer Rev 0x22: initial timeout 60 sec
> > TCP cubic registered
> > NET: Registered protocol family 17
> > NET: Registered protocol family 15
> > Power Management for OMAP2 initializing
> > PRCM revision 1.0
> > eth0: link up
> > IP-Config: Guessing netmask 255.255.255.0
> > IP-Config: Complete:
> > device=eth0, addr=192.168.8.203, mask=255.255.255.0,
> > gw=255.255.255.255,
> > host=192.168.8.203, domain=, nis-domain=(none),
> > bootserver=255.255.255.255, rootserver=192.168.8.83, rootpath=
> > Looking up port of RPC 100003/2 on 192.168.8.83
> > Looking up port of RPC 100005/1 on 192.168.8.83
> > VFS: Mounted root (nfs filesystem) on device 0:11.
> > Freeing init memory: 116K
> > Kernel panic - not syncing: Attempted to kill init!
>
> > ===========================================================
>
> > But I'm getting a kernel panic. Is there anything I've missed in the
> > kernel configuration for Android. In the kernel I'm using there is no
> > configuration item for ASHMEM, WAKELOCK, etc. do they have to be
> > enabled? Am I using the right Android kernel?
>
> > I've also tried the omap android kernel from the following link.
> > git://android.git.kernel.org/kernel/omap.git using branch named
> > "android-omap-2.6.32".
> > This is even worse. I don't get any kernel messages output on the
> > screen.
>
> > Please provide me a solution for this.
>
> > Thanks and regards,
> > Vadi.
>
> > --
> > unsubscribe: android-porting+unsubscr...@googlegroups.com
> > website:http://groups.google.com/group/android-porting- Hide quoted text -
>
> - Show quoted text -
--
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting
