what kind of board you are using? BBG EVK? You can try later FreeScale Release like R8 or R9...
2010/12/6 Vinay <vinayku...@gmail.com> > Hi, > > I'm trying to port froyo to imx 51 board. I have followed the > instructions given in the document: iMx Android R7 User guide. I have > not encountered any error while building the u-boot, kernel and > android images. > > However the board does not boot and hangs at a particular point. The > log gathered using minicom is as below. I'm a new to this, please let > me know what is going wrong. > > Starting > kernel ... > > Linux version 2.6.31-00839-gb0f5b7f (ic012...@blrkapt0675pc) (gcc > version 4.1.20 > CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), > cr=10c53c7f > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction > cache > Machine: Freescale MX51 Babbage > Board > Memory policy: ECC disabled, Data cache > writeback > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 109728 > Kernel command line: console=ttymxc0,115200 init=/init > androidboot.console=ttymp > Unknown boot option `androidboot.console=ttymxc0': > ignoring > PID hash table entries: 2048 (order: 11, 8192 > bytes) > Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > Memory: 432MB = 432MB > total > Memory: 431664KB available (5188K code, 922K data, 168K init, 0K > highmem) > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, > Nodes=1 > NR_IRQS: > 368 > MXC IRQ > initialized > MXC_Early serial console at MMIO 0x73fbc000 (options > '115200') > console [ttymxc0] > enabled > Console: colour dummy device > 80x30 > Calibrating delay loop... 799.53 BogoMIPS > (lpj=3997696) > Mount-cache hash table entries: > 512 > CPU: Testing write buffer coherency: > ok > regulator: core version > 0.5 > NET: Registered protocol family > 16 > i.MX IRAM pool: 128 > k...@0xdb840000 > IRAM > READY > CPU is i.MX51 Revision > 3.0 > MXC GPIO > hardware > iomux_config_mux: Warning: iomux pin config changed, reg=f7ea8134, > prev=0x1 ne3 > Using SDMA > I.API > MXC DMA API > initialized > bio: create slab <bio-0> at > 0 > SCSI subsystem > initialized > CSPI: mxc_spi-0 > probed > usbcore: registered new interface driver > usbfs > usbcore: registered new interface driver > hub > usbcore: registered new device driver > usb > MXC I2C > driver > MXC I2C > driver > MXC HS I2C > driver > IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), > 5F(6,7) > Bluetooth: Core ver > 2.15 > NET: Registered protocol family > 31 > Bluetooth: HCI device and connection manager > initialized > Bluetooth: HCI socket layer > initialized > mc13892 Rev 2.0 FinVer 2 > detected > Initializing regulators for > Babbage. > regulator: SW1: 600 <--> 1375 > mV > regulator: SW2: 900 <--> 1850 > mV > regulator: SW3: 1100 <--> 1850 > mV > regulator: SW4: 1100 <--> 1850 > mV > regulator: SWBST: 0 > mV > regulator: VIOHI: 0 > mV > regulator: VPLL: 1050 <--> 1800 > mV > regulator: VDIG: 1650 > mV > regulator: VSD: 1800 <--> 3150 > mV > regulator: VUSB2: 2400 <--> 2775 > mV > regulator: VVIDEO: 2775 > mV > regulator: VAUDIO: 2300 <--> 3000 > mV > regulator: VCAM: 2500 <--> 3000 mV fast > normal > regulator: VGEN1: 1200 > mV > regulator: VGEN2: 1200 <--> 3150 > mV > regulator: VGEN3: 1800 <--> 2900 > mV > regulator: VUSB: 0 > mV > regulator: GPO1: 0 > mV > regulator: GPO2: 0 > mV > regulator: GPO3: 0 > mV > regulator: GPO4: 0 > mV > Device spi1.0 > probed > NET: Registered protocol family > 2 > IP route cache hash table entries: 4096 (order: 2, 16384 > bytes) > TCP established hash table entries: 16384 (order: 5, 131072 > bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 > bytes) > TCP: Hash tables configured (established 16384 bind > 16384) > TCP reno > registered > NET: Registered protocol family > 1 > Trying to unpack rootfs image as > initramfs... > Freeing initrd memory: > 208K > LPMode driver module > loaded > Static Power Management for Freescale > i.MX51 > PM driver module > loaded > sdram autogating driver module > loaded > Bus freq driver module > loaded > DI1 is > primary > mxc_dvfs_core_probe > DVFS driver module > loaded > i.MXC CPU frequency > driver > DVFS PER driver module > loaded > ashmem: > initialized > msgmni has been set to > 843 > alg: No test for stdrng > (krng) > io scheduler noop > registered > io scheduler anticipatory > registered > io scheduler deadline > registered > io scheduler cfq registered > (default) > mxc_ipu mxc_ipu: Channel already disabled > 9 > mxc_ipu mxc_ipu: Channel already uninitialized > 9 > Console: switching to colour frame buffer device > 100x30 > fbcvt: 1024x...@60: CVT Name - . > 786M3 > regulator: get() with no > identifier > regulator: get() with no > identifier > regulator: get() with no > identifier > mxci2c_wait_writefifo:wait > error > Serial: MXC Internal UART > driver > mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale > i.MX > console handover: boot [ttymxc0] -> real > [ttymxc0] > mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale > i.MX > mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale > i.MX > brd: module > loaded > loop: module > loaded > pmem_adsp: 1 > init > pmem_gpu: 3 > init > FEC Ethernet > Driver > fec_enet_mii_bus: > probed > IEEE1588: ptp-timer is > unavailable > PPP generic driver version > 2.4.2 > mxc_dataflash spi1.1: at45db321d (1000 KBytes) pagesize 512 bytes > (OTP) > Creating 2 MTD partitions on > "mxc_dataflash": > 0x000000000000-0x000000100000 : > "bootloader" > 0x000000100000-0x000000400000 : > "kernel" > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host > Controller > fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number > 1 > fsl-ehci fsl-ehci.1: irq 14, io base > 0x73f80200 > fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI > 1.00 > usb usb1: configuration #1 chosen from 1 > choice > hub 1-0:1.0: USB hub > found > hub 1-0:1.0: 1 port > detected > Initializing USB Mass Storage > driver... > usbcore: registered new interface driver usb- > storage > USB Mass Storage support > registered. > usbcore: registered new interface driver > usbserial > USB Serial support registered for > generic > usbcore: registered new interface driver > usbserial_generic > usbserial: USB Serial Driver > core > USB Serial support registered for GSM modem (1- > port) > usbcore: registered new interface driver > option > option: v0.7.2:USB Driver for GSM > modems > ARC USBOTG Device Controller driver (1 August > 2005) > mice: could not register psaux device, error: > -16 > mice: PS/2 mouse device common for all > mice > MXC keypad > loaded > clk: Unable to get requested clock: > kpp_clk > input: mxckpd as /devices/virtual/input/ > input0 > mc13892 rtc probe > start > pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as > rtc0 > mc13892 rtc probe > succeed > i2c /dev entries > driver > Linux video capture interface: > v2.00 > i2c-adapter i2c-0: ACK not > received > ov3640_write_reg:write reg > error:reg=3012,val=80 > mxc_v4l2_output mxc_v4l2_output.0: Registered device > video1 > usb 1-1: new high speed USB device using fsl-ehci and address > 2 > i2c-adapter i2c-1: ACK not > received > MXC WatchDog Driver > 2.0 > clk: Unable to get requested clock: > wdog_clk > MXC Watchdog # 0 Timer: initial timeout 60 > sec > device-mapper: uevent: version > 1.0.3 > device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm- > de...@redhat.com > Bluetooth: Virtual HCI driver ver > 1.3 > Bluetooth: Generic Bluetooth USB driver ver > 0.5 > usbcore: registered new interface driver > btusb > VPU > initialized > mxsdhci: MXC Secure Digital Host Controller Interface > driver > mxsdhci: MXC SDHCI Controller > Driver. > mmc0: SDHCI detect irq 128 irq 1 INTERNAL > DMA > mxsdhci: MXC SDHCI Controller > Driver. > mmc1: SDHCI detect irq 134 irq 2 INTERNAL > DMA > Registered led device: > pmic_ledsr > Registered led device: > pmic_ledsg > Registered led device: > pmic_ledsb > usbcore: registered new interface driver > usbhid > usbhid: v2.6:USB HID core > driver > usb 1-1: configuration #1 chosen from 1 > choice > logger: created 64K log > 'log_main' > logger: created 256K log > 'log_events' > hub 1-1:1.0: USB hub > found > hub 1-1:1.0: 7 ports > detected > logger: created 64K log > 'log_radio' > logger: created 64K log > 'log_system' > Advanced Linux Sound Architecture Driver Version > 1.0.20. > regulator: Unable to get requested regulator: > VDDD > sgtl5000-i2c 1-000a: SGTL5000 revision > 17 > mmc0: new high speed SD card at address > 1234 > mmcblk0: mmc0:1234 SA02G 1.83 > GiB > mmcblk0: p1 p2 p3 < p5 p6 > > p4 > No device for DAI imx- > ssi-1-0 > No device for DAI imx- > ssi-1-1 > No device for DAI imx- > ssi-2-0 > No device for DAI imx- > ssi-2-1 > DMA Sound Buffers Allocated:UseIram=1 buf->addr=1fff6000 buf- > >area=db856000 siz6 > DMA Sound Buffers Allocated:UseIram=1 buf->addr=a9298000 buf- > >area=fa31d000 siz6 > asoc: SGTL5000 <-> imx-ssi-2-0 mapping > ok > ALSA device > list: > #0: imx-3stack > (SGTL5000) > TCP cubic > registered > NET: Registered protocol family > 10 > IPv6 over IPv4 tunneling > driver > NET: Registered protocol family > 17 > Bluetooth: L2CAP ver > 2.13 > Bluetooth: L2CAP socket layer > initialized > Bluetooth: SCO (Voice Link) ver > 0.6 > Bluetooth: SCO socket layer > initialized > Bluetooth: RFCOMM TTY layer > initialized > Bluetooth: RFCOMM socket layer > initialized > Bluetooth: RFCOMM ver > 1.11 > Bluetooth: BNEP (Ethernet Emulation) ver > 1.3 > Bluetooth: BNEP filters: protocol > multicast > Bluetooth: HIDP (Human Interface Emulation) ver > 1.2 > usb 1-1.2: new low speed USB device using fsl-ehci and address > 3 > RPC: Registered udp transport > module. > RPC: Registered tcp transport > module. > <6>DVI device plug- > in > VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev > 2 > regulator_init_complete: disabling > GPO4 > regulator_init_complete: disabling > GPO3 > regulator_init_complete: disabling > GPO2 > regulator_init_complete: disabling > GPO1 > regulator_init_complete: disabling > VGEN1 > regulator_init_complete: disabling > VCAM > regulator_init_complete: disabling > VAUDIO > regulator_init_complete: disabling > VSD > regulator_init_complete: disabling > SWBST > android > init > android_probe pdata: > c0574054 > android_bind > mass_storage_function_add > android_usb gadget: Number of > LUNs=3 > adb_function_add > android_usb gadget: android_usb > ready > udc > run > fsl-usb2-udc: bind to driver > android_usb > input: mxc_ts as /devices/virtual/input/ > input1 > mxc input touchscreen > loaded > pmic_rtc pmic_rtc.1: setting system clock to 1970-02-23 21:14:41 UTC > (4655681) > usb 1-1.2: configuration #1 chosen from 1 > choice > input: Dell Dell USB Keyboard as /devices/platform/fsl-ehci.1/ > usb1/1-1/1-1.2/1-2 > generic-usb 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell > Dell USB K0 > IP-Config: Failed to open > eth0 > IP-Config: No network devices > available. > Freeing init memory: > 168K > init: cannot open '/ > initlogo.rle' > kjournald starting. Commit interval 5 > seconds > EXT3 FS on mmcblk0p2, internal > journal > EXT3-fs: mounted filesystem with writeback data > mode. > usb 1-1.6: new high speed USB device using fsl-ehci and address > 4 > usb 1-1.6: configuration #1 chosen from 1 > choice > scsi0 : SCSI emulation for USB Mass Storage > devices > kjournald starting. Commit interval 5 > seconds > EXT3 FS on mmcblk0p5, internal > journal > EXT3-fs: recovery > complete. > EXT3-fs: mounted filesystem with writeback data > mode. > kjournald starting. Commit interval 5 > seconds > EXT3 FS on mmcblk0p6, internal > journal > EXT3-fs: recovery > complete. > EXT3-fs: mounted filesystem with writeback data > mode. > scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0041 PQ: 0 > ANSI: 0 > sd 0:0:0:0: [sda] Attached SCSI disk > > (This is where, nothing happens further) > > Thanks in advance, > Vinay. > > -- > unsubscribe: > android-porting+unsubscr...@googlegroups.com<android-porting%2bunsubscr...@googlegroups.com> > website: http://groups.google.com/group/android-porting > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
