Hi Andy Jung, Thanks for the reply, I am kinda new in debugging. So please expect some simple doubts. >try logcat& and see what the problem is I tried to access /var/log from the minicom, but I couldn't even basic shell commands like cat, ls is not found.
Other method of retrieving log i know is, through adb. My development board is Hawkboard and its ethernet is not working. This will stop me from communicating from host to target. Hence I cant use adb method. Is there any other way i can retrieve log? Thanks Srinidhi On Fri, Dec 24, 2010 at 3:31 PM, Andy Jung <ajung...@gmail.com> wrote: > try logcat& and see what the problem is. you are either missing some file > used in file system or in need of flushing cache&data directory > > 나의 iPhone에서 보냄 > > 2010. 12. 24. 오후 5:27 Srinidhi K V <srinidh...@yahoo.co.in> 작성: > > Hi All, > I was trying to boot Android 2.2.1 on Hawk board. I could successfully > build but when I boot I get the following error. > Can anyone help to resolve this? > > Starting kernel ... > > Linux version 2.6.32-rc6 (r...@srinidhi-desktop) (gcc version 4.3.3 > (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT Mon Nov 8 12:32:05 IST 2010 > CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 > CPU: VIVT data cache, VIVT instruction cache > Machine: OMAPL 138 <http://Hawkboard.org>Hawkboard.org > Memory policy: ECC disabled, Data cache writeback > DaVinci da850/omap-l138 variant 0x0 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 > Kernel command line: console=ttyS2,115200n8 console=tty1 noinitrd > root=/dev/mmcblk0p1 rootwait rw init=/init ip=none androidboot.console=ttyS2 > Unknown boot option `androidboot.console=ttyS2': ignoring > PID hash table entries: 512 (order: -1, 2048 bytes) > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 128MB = 128MB total > Memory: 125140KB available (3732K code, 726K data, 148K init, 0K highmem) > SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > Hierarchical RCU implementation. > NR_IRQS:245 > Console: colour dummy device 80x30 > Calibrating delay loop... 149.50 BogoMIPS (lpj=747520) > Mount-cache hash table entries: 512 > CPU: Testing write buffer coherency: ok > DaVinci: 144 gpio irqs > regulator: core version 0.5 > NET: Registered protocol family 16 > bio: create slab <bio-0> at 0 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > Switching to clocksource timer0_1 > musb_hdrc: version 6.0, cppi4.1-dma, (host+peripheral), debug=0 > Waiting for USB PHY clock good... > musb_hdrc: USB OTG mode controller at fee00000 using DMA, IRQ 58 > musb_hdrc musb_hdrc: MUSB HDRC host driver > musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 1 port detected > NET: Registered protocol family 2 > IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > TCP established hash table entries: 4096 (order: 3, 32768 bytes) > TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > TCP: Hash tables configured (established 4096 bind 4096) > TCP reno registered > NET: Registered protocol family 1 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > RPC: Registered tcp NFSv4.1 backchannel transport module. > ashmem: initialized > JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. > msgmni has been set to 244 > io scheduler noop registered > io scheduler anticipatory registered (default) > da8xx_lcdc da8xx_lcdc.0: GLCD: Found VGA_Monitor panel > Console: switching to colour frame buffer device 80x30 > Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled > serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A > serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A > serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A > console [ttyS2] enabled > brd: module loaded > ahci ahci: forcing PORTS_IMPL to 0x1 > ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc > scsi0 : ahci > ata1: SATA max UDMA/133 irq 67 > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron NAND 128MiB 1,8V > 8-bit) > Bad block table not found for chip 0 > Bad block table not found for chip 0 > Scanning device for bad blocks > Creating 5 MTD partitions on "davinci_nand.1": > 0x000000000000-0x000000020000 : "u-boot env" > 0x000000020000-0x000000040000 : "UBL" > 0x000000040000-0x0000000c0000 : "u-boot" > 0x000000200000-0x000000400000 : "kernel" > 0x000000400000-0x000008000000 : "filesystem" > davinci_nand davinci_nand.1: controller rev. 2.5 > console [netcon0] enabled > netconsole: network logging started > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci ohci.0: DA8xx OHCI > ohci ohci.0: new USB bus registered, assigned bus number 2 > ohci ohci.0: irq 59, io mem 0x01e25000 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 1 port detected > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > g_ether gadget: using random self ethernet address > g_ether gadget: using random host ethernet address > usb0: MAC 92:ff:b3:a4:f5:a3 > usb0: HOST MAC 02:be:85:1c:6f:9c > g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 > g_ether gadget: g_ether ready > mice: PS/2 mouse device common for all mice > i2c /dev entries driver > watchdog watchdog: heartbeat 60 sec > cpuidle: using governor ladder > cpuidle: using governor menu > davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > logger: created 64K log 'log_main' > logger: created 256K log 'log_events' > logger: created 64K log 'log_radio' > logger: created 64K log 'log_system' > Advanced Linux Sound Architecture Driver Version 1.0.21. > No device for DAI tlv320aic3x > asoc: tlv320aic3x <-> davinci-i2s mapping ok > ALSA device list: > #0: DA850/OMAP-L138 EVM (tlv320aic3x) > TCP cubic registered > NET: Registered protocol family 17 > Clocks: disable unused emac > Clocks: disable unused spi1 > ata1: SATA link down (SStatus 0 SControl 300) > davinci_emac_probe: using random MAC addr: fe:9e:72:0a:ab:8c > emac-mii: probed > Waiting for root device /dev/mmcblk0p1... > usb 2-1: new low speed USB device using ohci and address 2 > usb 2-1: configuration #1 chosen from 1 choice > input: Logitech USB Keyboard as > /devices/platform/ohci.0/usb2/2-1/2-1:1.0/input/input0 > generic-usb 0003:046D:C31C.0001: input: USB HID v1.10 Keyboard [Logitech > USB Keyboard] on usb-ohci.0-1/input0 > input: Logitech USB Keyboard as > /devices/platform/ohci.0/usb2/2-1/2-1:1.1/input/input1 > generic-usb 0003:046D:C31C.0002: input: USB HID v1.10 Device [Logitech USB > Keyboard] on usb-ohci.0-1/input1 > mmc0: new high speed SD card at address b368 > mmcblk0: mmc0:b368 SDC 1.85 GiB > mmcblk0: p1 > EXT3-fs warning: maximal mount count reached, running e2fsck is recommended > kjournald starting. Commit interval 5 seconds > EXT3 FS on mmcblk0p1, internal journal > EXT3-fs: mounted filesystem with writeback data mode. > VFS: Mounted root (ext3 filesystem) on device 179:1. > Freeing init memory: 148K > Warning: unable to open an initial console. > init: cannot open '/initlogo.rle' > init: cannot find '/system/etc/install-recovery.sh', disabling > 'flash_recovery' > # > # k > k: not found > # ls > ls: not found > # warning: `zygote' uses 32-bit capabilities (legacy support in use) > init: untracked pid 655 exited > init: untracked pid 692 exited > init: untracked pid 708 exited > init: untracked pid 723 exited > init: untracked pid 738 exited > init: untracked pid 753 exited > init: untracked pid 768 exited > init: untracked pid 783 exited > init: untracked pid 798 exited > > > Thanks > Srinidhi > > > -- > unsubscribe: <android-porting+unsubscr...@googlegroups.com> > android-porting+unsubscr...@googlegroups.com > website: <http://groups.google.com/group/android-porting> > http://groups.google.com/group/android-porting > > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting