On Fri, Feb 4, 2011 at 12:21 AM, yaswanth raparti <raparti.yaswa...@gmail.com> wrote: > hi guys, > i have a EMA OMAP3530 kit which had a pre built NAND images for > xloader, uboot and kernel..
Can you give this "TI Android FroYo DevKit V 2.2 for OMAP35x/Beagle-Cx/XM and AM37x/DM3730 EVMs" http://groups.google.com/group/android-porting/msg/a6179104500c99ed a try instead. Regards, Amit Pundir > i tried to boot it using SD card [ 2 partitions, FAT & EXT3] with the > images provided by the company 's support CD. > > it gets stuck at the point where it starts kernel..... > > so, i tried to compile and build my own images for my board.. and i > set the compilation config to omap3 stalker. > and i loaded android fs into EXT3 i tried to boot, and gets an error, > > warning : uable to start an initial console. > kernel panic: not syncing,init failed.. > > what could be the reason for that?? > > i want to know if i have to build my kernel images for android? or use > a minimum init.rc ? just show me a route.. > > i will in the next post file the boot log i got.. > > thank you.. > > -- > unsubscribe: android-porting+unsubscr...@googlegroups.com > website: http://groups.google.com/group/android-porting > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting