Hello Roger, I did the cold boot. It works now. The following release does not work http://www.omappedia.org/wiki/L27.G.1a_OMAP4430_GingerBread_Release_Notes
and this release did work http://www.omappedia.com/wiki/L27.G.2_OMAP4_GingerBread_Release_Notes I did exactly as per the release notes. Thanks for your support Roger. On Tue, Jul 12, 2011 at 4:52 PM, Roger Quadros <rog...@ti.com> wrote: > Sorry Rajesh, I'm out of ideas. > > One more thing I would do is cold boot the system without HDMI cable > connected and see if LCD works. > > cheers, > -roger > > > On 07/12/2011 02:17 PM, Rajesh RV wrote: > >> Hello Roger, >> >> I'm attaching the log message for your reference. >> >> omapdss HDMI: deep_color_bit30=0 bit36=0 max_tmds_freq=0 >> omapdss HDMI: CEA:16 res=1920x1080 >> omapdss HDMI: pwrchanged => (3,A) = 0 >> <hdmi_notify_pwrchange> Notify Audio Powerchange - 3 >> omapdss HDMI: <hdmi_work_queue> action = 1, r = 0x1, hdmi_power = 3, >> hdmi_connected = 1 >> omapdss HDMI: powerchg (a=0,v=3,s=0/0)->(a=0,v=3,s=0) = (3:A) >> omapdss HDMI: pwrchanged => (3,A) = 0 >> omapdss HDMI: <hdmi_work_queue> action = 0, r = 0x8, hdmi_power = 3, >> hdmi_connected = 1 >> omapdss HDMI: powerchg (a=0,v=3,s=0/0)->(a=0,v=3,s=0) = (3:A) >> omapdss HDMI: pwrchanged => (3,A) = 0 >> omap_vout omap_vout: : registered and initialized video device 0 >> omap_vout omap_vout: : registered and initialized video device 1 >> omap_wb: registered and initialized wb device 3 [v4l2] >> Freeing init memory: 244K >> init: cannot open '/initlogo.rle' >> EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: >> (null) >> EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: >> (null) >> EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: >> (null) >> init: cannot find '/system/etc/install-recovery.**sh', disabling >> 'flash_recovery' >> enabling adb >> adb_open >> $ warning: `zygote' uses 32-bit capabilities (legacy support in use) >> request_suspend_state: wakeup (3->0) at 18720092776 (2000-01-01 >> 21:35:03.098999024 UTC) >> init: untracked pid 1544 exited >> init: untracked pid 1548 exited >> request_suspend_state: wakeup (0->0) at 21937408450 (2000-01-01 >> 21:35:06.316284181 UTC) >> init: untracked pid 1631 exited >> init: untracked pid 1630 exited >> request_suspend_state: wakeup (0->0) at 27207977298 (2000-01-01 >> 21:35:11.586883546 UTC) >> init: untracked pid 1651 exited >> init: untracked pid 1652 exited >> $ ls >> config >> cache >> sdcard >> acct >> mnt >> vendor >> d >> etc >> ueventd.rc >> ueventd.omap4430.rc >> ueventd.goldfish.rc >> system >> sys >> sbin >> proc >> init.rc >> init.omap4430.rc >> init.goldfish.rc >> init >> default.prop >> data >> root >> dev >> $ request_suspend_state: wakeup (0->0) at 126338012699 (2000-01-01 >> 21:36:50.716918947 UTC) >> init: untracked pid 2093 exited >> init: untracked pid 2092 exited >> >> >> On Tue, Jul 12, 2011 at 4:43 PM, Rajesh RV >> <varadharajan.raj...@gmail.com >> <mailto:varadharajan.rajesh@**gmail.com<varadharajan.raj...@gmail.com> >> >> >> >> wrote: >> >> Hello Roger, >> I opened the /out/target/product/blaze/**root/init.omap4430.rc >> file. I found it is already been modified. >> >> I think it is coped from ./device/ti/blaze/init.**omap4430.rc during >> make process. >> >> Both LCD and HDMI interface is powered up. But nothing is displayed. >> I could do "ls" in the console and can see all android file system >> >> I suspect some display setting is wrong. >> >> Please let me know which setting i should look for. >> >> >> >> On Tue, Jul 12, 2011 at 4:39 PM, Roger Quadros <rog...@ti.com >> <mailto:rog...@ti.com>> wrote: >> >> Rajesh, >> >> >> On 07/12/2011 02:01 PM, Rajesh RV wrote: >> >> Hello Roger, >> >> I recreated the .img files after editing the >> init.omap4430.rc file. >> >> Please find my command sequences below >> >> > vi ./device/ti/blaze/init.__**omap4430.rc >> deleted the critical settings for ducati >> >> >> Try editing this file instead >> >> /out/target/product/blaze/__**root/init.omap4430.rc >> >> and repeat the below steps. >> >> >> > find out/target/product/blaze -name *.img -exec rm -f {} \; >> > make >> > cp out/target/product/blaze/*.img >> ../../../omap4_emmc_files/. >> >> >> cheers, >> -roger >> >> Please let me know whether i edited the right startup script. >> >> >> On Tue, Jul 12, 2011 at 4:25 PM, Roger Quadros >> <rog...@ti.com <mailto:rog...@ti.com> >> <mailto:rog...@ti.com <mailto:rog...@ti.com>>> wrote: >> >> Rajesh, >> >> >> On 07/12/2011 01:49 PM, Rajesh RV wrote: >> >> Hello Roger, Sam, >> Now i downloaded the Database as per the >> following release notes >> >> http://www.omappedia.com/wiki/**____L27.G.2_OMAP4_GingerBread_ >> **____Release_Notes<http://www.omappedia.com/wiki/____L27.G.2_OMAP4_GingerBread_____Release_Notes> >> <http://www.omappedia.com/**wiki/__L27.G.2_OMAP4_** >> GingerBread___Release_Notes<http://www.omappedia.com/wiki/__L27.G.2_OMAP4_GingerBread___Release_Notes> >> > >> <http://www.omappedia.com/__**wiki/L27.G.2_OMAP4___** >> GingerBread_Release_Notes<http://www.omappedia.com/__wiki/L27.G.2_OMAP4___GingerBread_Release_Notes> >> <http://www.omappedia.com/**wiki/L27.G.2_OMAP4_** >> GingerBread_Release_Notes<http://www.omappedia.com/wiki/L27.G.2_OMAP4_GingerBread_Release_Notes> >> >> >> >> That problem is gone and kernel booting happens >> without any issues. >> >> Now i have an other problem. I have removed >> "critical" setting >> when the >> syslink_daemon for ducati is booting as per the >> release notes. >> >> >> Did you re-create the images after editing the startup >> script? >> >> cheers, >> -roger >> >> >> I dont see anything on the LCD screen as well as >> HDMI interface. >> >> >> Please find my bootloader log below >> >> >> Texas Instruments X-Loader 1.41 (Jul 12 2011 - >> 14:41:44) >> Starting OS Bootloader from EMMC ... >> >> >> U-Boot 1.1.4-L27.13.1^0 (Jul 12 2011 - 14:40:27) >> >> Load address: 0x80e80000 >> DRAM: 1024 MB >> Flash: 0 kB >> Using default environment >> >> In: serial >> Out: serial >> Err: serial >> >> efi partition table: >> 256 128K xloader >> 512 256K bootloader >> 2048 8M recovery >> 18432 8M boot >> 34816 512M system >> 1083392 256M cache >> 1607680 512M userdata >> 2656256 2183M media >> Net: KS8851SNL >> Hit any key to stop autoboot: 3 ^H^H^H 0 >> OMAP44XX SDP # >> >> OMAP44XX SDP # print >> bootargs=console=ttyO2,____**115200n8 >> mem=456M@0x80000000 >> mem=512M@0xA0000000 >> init=/init vram=10M omapfb.vram=0:4M >> androidboot.console=ttyO2 >> bootcmd=booti mmc1 >> bootdelay=3 >> baudrate=115200 >> ipaddr=128.247.77.90 >> serverip=128.247.77.158 >> netmask=255.255.254.0 >> bootfile="uImage" >> stdin=serial >> stdout=serial >> stderr=serial >> ethact=KS8851SNL >> >> Environment size: 325/131068 bytes >> OMAP44XX SDP # >> >> Let me know incase i'm missing something, >> >> >> >> On Tue, Jul 12, 2011 at 3:35 PM, Rajesh RV >> <varadharajan.raj...@gmail.com >> >> <mailto:varadharajan.rajesh@**gmail.com<varadharajan.raj...@gmail.com> >> > >> <mailto:varadharajan.rajesh@__**gmail.com <http://gmail.com> >> >> <mailto:varadharajan.rajesh@**gmail.com<varadharajan.raj...@gmail.com> >> >> >> <mailto:varadharajan.rajesh@ >> <mailto:varadharajan.rajesh@>_**___gmail.com <http://gmail.com >> > >> >> <mailto:varadharajan.rajesh@__**gmail.com <http://gmail.com> >> >> <mailto:varadharajan.rajesh@**gmail.com<varadharajan.raj...@gmail.com> >> >>>> >> >> wrote: >> >> Hello Sam, >> The latest release notes doesn't talk about >> the creating >> system.img manually. system.img is built >> automatically at >> the end. >> >> I'll try creating system.img manually as per your >> instruction and >> let you know the status. >> >> >> On Tue, Jul 12, 2011 at 2:00 PM, Lee, Sam >> <ri...@softha.com <mailto:ri...@softha.com> >> <mailto:ri...@softha.com <mailto:ri...@softha.com>> >> <mailto:ri...@softha.com <mailto:ri...@softha.com> >> <mailto:ri...@softha.com <mailto:ri...@softha.com>>>> wrote: >> >> Hi, Rajesh RV.____ >> >> __ __ >> >> First, I didn’t run eMMC method but it seems >> that just file >> issue.____ >> >> __ __ >> >> Second, so I offer to remake system.img, see >> section of >> ‘Then >> create system image” of below link.____ >> >> Prepare files for eMMC then check files in >> ‘system/bin’ >> and make >> system.img____ >> >> __ __ >> >> http://www.omappedia.org/wiki/**____L27.INC1.7.2_OMAP4_Froyo__ >> **_ES2___Release_Notes____<http://www.omappedia.org/wiki/____L27.INC1.7.2_OMAP4_Froyo___ES2___Release_Notes____> >> <http://www.omappedia.org/**wiki/__L27.INC1.7.2_OMAP4_** >> Froyo_ES2___Release_Notes____<http://www.omappedia.org/wiki/__L27.INC1.7.2_OMAP4_Froyo_ES2___Release_Notes____> >> > >> <http://www.omappedia.org/__**wiki/L27.INC1.7.2_OMAP4_Froyo_** >> __ES2_Release_Notes____<http://www.omappedia.org/__wiki/L27.INC1.7.2_OMAP4_Froyo___ES2_Release_Notes____> >> <http://www.omappedia.org/**wiki/L27.INC1.7.2_OMAP4_Froyo_** >> ES2_Release_Notes____<http://www.omappedia.org/wiki/L27.INC1.7.2_OMAP4_Froyo_ES2_Release_Notes____> >> >> >> >> __ __ >> >> I think that release note of TI is not >> details.____ >> >> __ __ >> >> Please add my address in mail thread.____ >> >> Good luck : - )____ >> >> __ __ >> >> Regards,____ >> >> Sam, Lee____ >> >> >> >> *From:*omapandroid-discussion-**____boun...@gforge.ti.com<omapandroid-discussion-____boun...@gforge.ti.com> >> >> <mailto:omapandroid-**discussion-__bounces@gforge.**ti.com<omapandroid-discussion-__boun...@gforge.ti.com> >> > >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti.<omapandroid-__discussion-boun...@gforge.ti.> >> _**_com >> >> <mailto:omapandroid-**discussion-boun...@gforge.ti.**com<omapandroid-discussion-boun...@gforge.ti.com> >> >> >> >> <mailto:omapandroid-____**discussion-boun...@gforge.ti<omapandroid-____discussion-boun...@gforge.ti> >> . >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti<omapandroid-__discussion-boun...@gforge.ti> >> .>**____com >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti.<omapandroid-__discussion-boun...@gforge.ti.> >> _**_com >> >> <mailto:omapandroid-**discussion-boun...@gforge.ti.**com<omapandroid-discussion-boun...@gforge.ti.com> >> >>> >> >> >> [mailto:omapandroid-____**discussion-boun...@gforge.ti<omapandroid-____discussion-boun...@gforge.ti> >> . >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti<omapandroid-__discussion-boun...@gforge.ti> >> .>**____com >> >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti.<omapandroid-__discussion-boun...@gforge.ti.> >> _**_com >> >> <mailto:omapandroid-**discussion-boun...@gforge.ti.**com<omapandroid-discussion-boun...@gforge.ti.com> >> >> >> >> <mailto:omapandroid-____**discussion-boun...@gforge.ti<omapandroid-____discussion-boun...@gforge.ti> >> . >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti<omapandroid-__discussion-boun...@gforge.ti> >> .>**____com >> >> <mailto:omapandroid-__**discussion-boun...@gforge.ti.<omapandroid-__discussion-boun...@gforge.ti.> >> _**_com >> >> <mailto:omapandroid-**discussion-boun...@gforge.ti.**com<omapandroid-discussion-boun...@gforge.ti.com>>>>] >> *On >> Behalf Of *Rajesh RV >> *Sent:* Tuesday, July 12, 2011 3:56 PM >> *To:* >> omapandroid-discussion@gforge.**____ti.com <http://ti.com> >> >> >> <mailto:omapandroid-__**discuss...@gforge.ti.com<omapandroid-__discuss...@gforge.ti.com> >> >> <mailto:omapandroid-**discuss...@gforge.ti.com<omapandroid-discuss...@gforge.ti.com> >> >> >> >> <mailto:omapandroid-____**discuss...@gforge.ti.com<omapandroid-____discuss...@gforge.ti.com> >> >> <mailto:omapandroid-__**discuss...@gforge.ti.com<omapandroid-__discuss...@gforge.ti.com> >> > >> >> <mailto:omapandroid-__**discuss...@gforge.ti.com<omapandroid-__discuss...@gforge.ti.com> >> >> <mailto:omapandroid-**discuss...@gforge.ti.com<omapandroid-discuss...@gforge.ti.com> >> >>>; >> android-porting@googlegroups._**___com >> >> <mailto:android-porting@__goog**legroups.com<http://googlegroups.com> >> >> <mailto:android-porting@**googlegroups.com<android-porting@googlegroups.com> >> >> >> <mailto:android-porting@ >> >> <mailto:android-porting@>__goo**g__legroups.com<http://goog__legroups.com> >> <http://googlegroups.com> >> >> >> <mailto:android-porting@__goog**legroups.com<http://googlegroups.com> >> >> <mailto:android-porting@**googlegroups.com<android-porting@googlegroups.com> >> >>> >> >> *Subject:* [Omapandroid-discussion] Problem >> booting OMAP >> Blaze >> from eMMC____ >> >> __ __ >> >> Hi All____ >> >> I'm trying to boot OMAP Blaze ES 2.2 >> Version as per the >> instruction in the following link____ >> >> __ __ >> >> http://www.omappedia.org/wiki/**____L27.G.1a_OMAP4430___** >> GingerBread___Release_Notes___**___<http://www.omappedia.org/wiki/____L27.G.1a_OMAP4430___GingerBread___Release_Notes______> >> <http://www.omappedia.org/**wiki/__L27.G.1a_OMAP4430_** >> GingerBread___Release_Notes___**_<http://www.omappedia.org/wiki/__L27.G.1a_OMAP4430_GingerBread___Release_Notes____> >> > >> <http://www.omappedia.org/__**wiki/L27.G.1a_OMAP4430___** >> GingerBread_Release_Notes____<http://www.omappedia.org/__wiki/L27.G.1a_OMAP4430___GingerBread_Release_Notes____> >> <http://www.omappedia.org/**wiki/L27.G.1a_OMAP4430_** >> GingerBread_Release_Notes____<http://www.omappedia.org/wiki/L27.G.1a_OMAP4430_GingerBread_Release_Notes____> >> >**> >> >> __ __ >> >> __ __ >> >> But i'm getting the following error____ >> >> __ __ >> >> Freeing init memory: 240K____ >> >> init: cannot open '/initlogo.rle'____ >> >> Device is holding contsraint on l4per_pwrdm____ >> >> omapdss HDMI: powerchg >> (a=0,v=0,s=0/0)->(a=0,v=1,s=0) = >> (1:A)____ >> >> omapdss HDMI: pwrchanged => (1,A) = 0____ >> >> init: Unable to open persistent property >> directory >> /data/property errno: 2____ >> >> init: cannot find >> '/system/bin/servicemanager', disabling >> 'servicemanager'____ >> >> init: cannot find '/system/bin/vold', >> disabling 'vold'____ >> >> init: cannot find '/system/bin/netd', >> disabling 'netd'____ >> >> init: cannot find '/system/bin/debuggerd', >> disabling >> 'debuggerd'____ >> >> init: cannot find '/system/bin/rild', disabling >> 'ril-daemon'____ >> >> init: cannot find '/system/bin/app_process', >> disabling >> 'zygote'____ >> >> init: cannot find '/system/bin/mediaserver', >> disabling >> 'media'____ >> >> init: cannot find '/system/bin/dbus-daemon', >> disabling >> 'dbus'____ >> >> init: cannot find '/system/bin/installd', >> disabling >> 'installd'____ >> >> init: cannot find >> '/system/etc/install-recovery.**____sh', >> disabling >> 'flash_recovery'____ >> >> init: cannot find '/system/bin/keystore', >> disabling >> 'keystore'____ >> >> init: cannot find >> '/system/bin/thermaldaemon', disabling >> 'thermaldaemon'____ >> >> init: cannot find '/system/bin/pvrsrvinit', >> disabling >> 'pvrsrvinit'____ >> >> init: cannot find >> '/system/bin/syslink_daemon.__**__out', >> disabling >> 'baseimage'____ >> >> init: cannot find '/system/bin/uim-sysfs', >> disabling >> 'uim'____ >> >> init: cannot find '/system/bin/sh', >> disabling 'console'____ >> >> enabling adb____ >> >> adb_open____ >> >> CPU1: shutdown____ >> >> __ __ >> >> __ __ >> >> Please give me some pointers to debug.____ >> >> __ __ >> >> -- >> Regards >> RVR____ >> >> >> >> >> -- >> Regards >> RVR >> >> >> >> >> -- >> Regards >> RVR >> >> >> >> >> >> -- >> Regards >> RVR >> >> >> >> >> >> -- >> Regards >> RVR >> >> >> >> >> -- >> Regards >> RVR >> > > -- Regards RVR -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting