Hi all, i have been trying to port the android on am3703 board through sd card.
1) while executing the uImage(kernel) image i got following error setenv bootargs mem=256M console=ttyS2,115200n8 noinitrd root=/dev/mmcblk0p2 omapdss.def_disp=lcd init=/init rootfstype=ext3 rw rootdelay=3 nof OMAP3 beagleboard.org # boot mmc1 is available reading boot.scr 415 bytes read Running bootscript from mmc ... ## Executing script at 82000000 reading uImage 1206164 bytes read ***** Kernel: /dev/mmcblk0p1/uImage ***** ***** RootFS: /dev/mmcblk0p2 ***** ## Booting kernel from Legacy Image at 80200000 ... Image Name: Linux-2.6.32 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1206100 Bytes = 1.2 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! 2) while executing the MLO i got following output 60 �������������������������������������������������������������������������������������� ////please check it why the output is coming as raw data. 3) while executing the u-boot.bin i got following output U-Boot 2009.11 (Sep 14 2011 - 19:15:13) OMAP34xx/35xx-GP ES2.1, CPU-OPP2 L3-165MHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 128 MB /// please check it. NAND: 512 MiB *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial Board revision Ax/Bx Die ID #580400029e380000016830c502020007 Hit any key to stop autoboot: 0 please suggest me how to go ahead further. my questions are 1) one more thing is while executing the MLO i got the raw data output!!!! i don't know why it's coming. 2) output of the u-boot.bin it's showing sdram size is 125MB but my custom board have 256MB. 3) because of above problem is uImage not booting or any other reason? please suggest me i had been struggling from last two weeks . thanks in advance. thanks&Regards k.v.raju -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
