Hi Abhilash, Go through the link provided below.. and try the following n see if you can get the modem working from command line.
http://processors.wiki.ti.com/index.php/TI-Android-GingerBread-2.3.4-DevKit-2.1.1_PortingGuides#USB_3G_Modem You will require *chat, usb_modeswitch* and *usb_modeswitch config* files which you can obtain from the below sites.. <http://draisberghof.de/usb_modeswitch/usb_modeswitch-1.1.9-arm-static.bz2> usb_modeswitch<http://draisberghof.de/usb_modeswitch/usb_modeswitch-1.1.9-arm-static.bz2>binary Config Files Here<http://draisberghof.de/usb_modeswitch/device_reference.txt> Download the pppd sources from the site and extract chat.c and follow this link to get the chat binary.. http://afewe.wordpress.com/android-arm-development/use-point-to-point-protocol-ppp-in-android/ For perfect implementation you need to make changes to *libreference-ril.c *as mentioned below .. http://afewe.wordpress.com/android-arm-development/working-with-the-radio-layer-interface-ril-in-android/ you can also check the lib-huawei-ril-generic source code below.. for further understanding.. https://github.com/DerArtem/huawei-generic-ril http://www.kandroid.org/online-pdk/guide/telephony.html -------------- Regards Vikas KM On Sun, Jun 17, 2012 at 8:13 PM, Abhilash Pujari <abhilashpuj...@gmail.com>wrote: > > > Hi Vikki, > > i am Abhilash from Banglore, working on Android 3G Interface, > kindly provide the architecture and software flow and hardware > requirements for the 3G interface to Android.. > i am struggling a lot to get information in net...please provide the > reference link / architecture diagram etc etc > > > > > > > > thanks and regards > Abhilash > > > > > > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
