Hi all,

I tried to modified TI Android ICS for beagleboard XM to make it work with 
devkit8000. But I got the following error:

*Freeing init memory:167*
*Warning: unable to open an initial console.*
*init: cannot open '/initlogo.rle'*
*init cannot find '/system/etc/install-recovery.sh', disabling 
'flash-recovery'*
*init: using deprecated syntax for specifying property 
'persist.sys.usb.config', use ${name} instead*
*init: using deprecated syntax for specifying property 'sys.usb.config', 
use ${name} instead*
*init: using deprecated syntax for specifying property 'sys.usb.config' use 
${name} instead*
*init: untracked pid 896 exited*
*init: untracked pid 894 exited* 
*init: untracked pid 890 exited* 
*init: untracked pid 931 exited* 
*init: untracked pid 940 exited* 
*init: untracked pid 941 exited* 
*init: untracked pid 961 exited* 
*init: untracked pid 971 exited* 
*init: untracked pid 966 exited* 
*init: untracked pid 968 exited* 
*init: untracked pid 980 exited* 
*init: untracked pid 989 exited* 
*init: untracked pid 991 exited*
*init: critical process 'servicemanager' exited 4 times in 4 minnutes; 
reboot into recovery mode*
*Sysq: Emergency Remount R/O*
*Restarting system with command 'recovery'* 

Could someone help me out? I checked the Binder IPC driver, and tried to 
minimize the init.rc but it could not fix the error. My bootargs is : 

*setenv bootargs 'console=ttyS2,115200n8 androidboot.console=ttyS2 mem=256M 
root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=6 init=/init ip=off 
omap_vout.vid1_static_vrfb_alloc=y omapfb.mode=lcd:800x480 
omapdss.def_disp=lcd vram=8M omapfb.vram=0:8M debug'*
*
*
Thank you very much for any of your help.

On Sunday, April 15, 2012 2:22:00 AM UTC+8, khasim wrote:
>
> Hi all,
>
> Please find TI Android ICS DevKit release for Beagleboard XM and
> Beaglebone platforms here,
>
> http://www.ti.com/sitara-android
>
> Beaglebone:
>
> http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_1/index_FDS.html
> Beaglebone LCD and DVID cape support is now added.
>
> Beagleboard XM:
>
> http://software-dl.ti.com/dsps/dsps_public_sw/sdo_tii/TI_Android_DevKit/TI_Android_ICS_4_0_3_DevKit_3_0_0/index_FDS.html
>
> Thanks to arowboat, android-porting and Linaro community for helping us.
>
> Regards,
> Khasim
>
> https://www.facebook.com/arowboat.org
>
>

-- 
unsubscribe: android-porting+unsubscr...@googlegroups.com
website: http://groups.google.com/group/android-porting

Reply via email to