Does it actually hang, or does it appear to do nothing? Do you have a serial console cable hooked up so that we may see the output?
One thing to note, without the serial console cable, the output from usbboot isnt obvious... it just flashes over bootloader, and without rebooting you have to start in with the fastboot commands. Also, pay extra attention to the directions regarding having the SD card out of the device when attempting to fire it up via usbboot. Weston On Sunday, August 5, 2012 11:08:20 PM UTC-7, sanath wrote: > > Hello All, > > I have downloaded the android ICS 4.0.3 version and compiled successfully. > I am using linux ubuntu 10.04 (64 bit) version and Pandaboard ES (Rev B1). > > I referred README file of /device/ti/panda/ and tried to boot the > pandaboard in fastboot mode.But when I tried this command > > device/ti/panda/usbboot device/ti/panda/bootloader.bin > its showing like this and just hangs there.... > > ----------------------------------------------------------------- > using built-in 2ndstage.bin > waiting for OMAP44xx device... > > ---------------------------------------------------------------------------- > > Also I have configured the usb access device by referring this > source.android.com/initialization page. But when I type dmesg after > connecting usb to pandaboard, I am getting messages like this... > > > ----------------------------------------------------------------------------- > [ 9836.621335] usb 1-7: USB disconnect, address 11 > [ 9837.450022] usb 1-7: new high speed USB device using ehci_hcd and > address 12 > [ 9837.600921] usb 1-7: configuration #1 chosen from 1 choice > [ 9840.601342] usb 1-7: USB disconnect, address 12 > [ 9841.430025] usb 1-7: new high speed USB device using ehci_hcd and > address 13 > [ 9841.580937] usb 1-7: configuration #1 chosen from 1 choice > [ 9844.581345] usb 1-7: USB disconnect, address 13 > [ 9845.410026] usb 1-7: new high speed USB device using ehci_hcd and > address 14 > [ 9845.560930] usb 1-7: configuration #1 chosen from 1 choice > [ 9848.561351] usb 1-7: USB disconnect, address 14 > [ 9849.390028] usb 1-7: new high speed USB device using ehci_hcd and > address 15 > [ 9849.540939] usb 1-7: configuration #1 chosen from 1 choice > [ 9852.541357] usb 1-7: USB disconnect, address 15 > [ 9853.370022] usb 1-7: new high speed USB device using ehci_hcd and > address 16 > [ 9853.520941] usb 1-7: configuration #1 chosen from 1 choice > [ 9856.521365] usb 1-7: USB disconnect, address 16 > [ 9857.350028] usb 1-7: new high speed USB device using ehci_hcd and > address 17 > [ 9857.500952] usb 1-7: configuration #1 chosen from 1 choice > [ 9860.501369] usb 1-7: USB disconnect, address 17 > [ 9861.330019] usb 1-7: new high speed USB device using ehci_hcd and > address 18 > [ 9861.480953] usb 1-7: configuration #1 chosen from 1 choice > [ 9864.481372] usb 1-7: USB disconnect, address 18 > [ 9865.310023] usb 1-7: new high speed USB device using ehci_hcd and > address 19 > [ 9865.460962] usb 1-7: configuration #1 chosen from 1 choice > [ 9868.461377] usb 1-7: USB disconnect, address 19 > > ---------------------------------------------------------------------------------------------------------------------------------------------------------- > > Can anybody please help me regarding this.. > > Thanks in advance, > Sanath > -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting
